#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.
Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.
Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.
for pointing out that these drivers still used com_activate().
Use device_private(). Join some lines.
Remove superfluous activation hooks.
Add child-detachment hooks (not used, yet).
TBD: device_t/softc split.
There are still about 1600 left, but they have ',' or /* ... */
in the actual variable definitions - which my awk script doesn't handle.
There are also many that need () -> (void).
(The script does handle misordered arguments.)
When a link-layer address changes (e.g., ifconfig ex0 link
02🇩🇪ad:be:ef:02 active), send a gratuitous ARP and/or a Neighbor
Advertisement to update the network-/link-layer address bindings
on our LAN peers.
Refuse a change of ethernet address to the address 00:00:00:00:00:00
or to any multicast/broadcast address. (Thanks matt@.)
Reorder ifnet ioctl operations so that driver ioctls may inherit
the functions of their "class"---ether_ioctl(), fddi_ioctl(), et
cetera---and the class ioctls may inherit from the generic ioctl,
ifioctl_common(), but both driver- and class-ioctls may override
the generic behavior. Make network drivers share more code.
Distinguish a "factory" link-layer address from others for the
purposes of both protecting that address from deletion and computing
EUI64.
Return consistent, appropriate error codes from network drivers.
Improve readability. KNF.
*** Details ***
In if_attach(), always initialize the interface ioctl routine,
ifnet->if_ioctl, if the driver has not already initialized it.
Delete if_ioctl == NULL tests everywhere else, because it cannot
happen.
In the ioctl routines of network interfaces, inherit common ioctl
behaviors by calling either ifioctl_common() or whichever ioctl
routine is appropriate for the class of interface---e.g., ether_ioctl()
for ethernets.
Stop (ab)using SIOCSIFADDR and start to use SIOCINITIFADDR. In
the user->kernel interface, SIOCSIFADDR's argument was an ifreq,
but on the protocol->ifnet interface, SIOCSIFADDR's argument was
an ifaddr. That was confusing, and it would work against me as I
make it possible for a network interface to overload most ioctls.
On the protocol->ifnet interface, replace SIOCSIFADDR with
SIOCINITIFADDR. In ifioctl(), return EPERM if userland tries to
invoke SIOCINITIFADDR.
In ifioctl(), give the interface the first shot at handling most
interface ioctls, and give the protocol the second shot, instead
of the other way around. Finally, let compatibility code (COMPAT_OSOCK)
take a shot.
Pull device initialization out of switch statements under
SIOCINITIFADDR. For example, pull ..._init() out of any switch
statement that looks like this:
switch (...->sa_family) {
case ...:
..._init();
...
break;
...
default:
..._init();
...
break;
}
Rewrite many if-else clauses that handle all permutations of IFF_UP
and IFF_RUNNING to use a switch statement,
switch (x & (IFF_UP|IFF_RUNNING)) {
case 0:
...
break;
case IFF_RUNNING:
...
break;
case IFF_UP:
...
break;
case IFF_UP|IFF_RUNNING:
...
break;
}
unifdef lots of code containing #ifdef FreeBSD, #ifdef NetBSD, and
#ifdef SIOCSIFMTU, especially in fwip(4) and in ndis(4).
In ipw(4), remove an if_set_sadl() call that is out of place.
In nfe(4), reuse the jumbo MTU logic in ether_ioctl().
Let ethernets register a callback for setting h/w state such as
promiscuous mode and the multicast filter in accord with a change
in the if_flags: ether_set_ifflags_cb() registers a callback that
returns ENETRESET if the caller should reset the ethernet by calling
if_init(), 0 on success, != 0 on failure. Pull common code from
ex(4), gem(4), nfe(4), sip(4), tlp(4), vge(4) into ether_ioctl(),
and register if_flags callbacks for those drivers.
Return ENOTTY instead of EINVAL for inappropriate ioctls. In
zyd(4), use ENXIO instead of ENOTTY to indicate that the device is
not any longer attached.
Add to if_set_sadl() a boolean 'factory' argument that indicates
whether a link-layer address was assigned by the factory or some
other source. In a comment, recommend using the factory address
for generating an EUI64, and update in6_get_hw_ifid() to prefer a
factory address to any other link-layer address.
Add a routing message, RTM_LLINFO_UPD, that tells protocols to
update the binding of network-layer addresses to link-layer addresses.
Implement this message in IPv4 and IPv6 by sending a gratuitous
ARP or a neighbor advertisement, respectively. Generate RTM_LLINFO_UPD
messages on a change of an interface's link-layer address.
In ether_ioctl(), do not let SIOCALIFADDR set a link-layer address
that is broadcast/multicast or equal to 00:00:00:00:00:00.
Make ether_ioctl() call ifioctl_common() to handle ioctls that it
does not understand.
In gif(4), initialize if_softc and use it, instead of assuming that
the gif_softc and ifp overlap.
Let ifioctl_common() handle SIOCGIFADDR.
Sprinkle rtcache_invariants(), which checks on DIAGNOSTIC kernels
that certain invariants on a struct route are satisfied.
In agr(4), rewrite agr_ioctl_filter() to be a bit more explicit
about the ioctls that we do not allow on an agr(4) member interface.
bzero -> memset. Delete unnecessary casts to void *. Use
sockaddr_in_init() and sockaddr_in6_init(). Compare pointers with
NULL instead of "testing truth". Replace some instances of (type
*)0 with NULL. Change some K&R prototypes to ANSI C, and join
lines.
handling, ether_mediastatus() and ether_mediachange(). Check for
a non-ENXIO error return from mii_mediachg(). (ENXIO indicates
that a PHY is suspended.)
This patch shrinks the source code size by 979 lines. There was
a 5100-byte savings on the NetBSD/i386 kernel configuration, ALL.
I have made a few miscellaneous changes, too:
gem(4): use LIST_EMPTY(), LIST_FOREACH().
mtd(4): handle media ioctls, for a change!
axe(4): do not track link status in sc->axe_link any longer
nfe(4), aue(4), axe(4), udav(4), url(4): do not reset all PHYs
on a change of media
Except for the change to mtd(4), no functional changes are intended.
XXX This patch affects more architectures than I can feasibly
XXX compile and run. I have compiled macppc, sparc64, i386. I
XXX have run the patches on i386 boxen with bnx(4) and sip(4).
XXX Compiling and running on evbmips (MERAKI, ADM5120) is in
XXX progress.
error = (cmd == SIOCADDMULTI) ?
ether_addmulti(ifr, &sc->sc_ec) :
ether_delmulti(ifr, &sc->sc_ec);
if (error == ENETRESET) {
to this,
if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) {
which does the same thing.
(A bazillion is a very large number. This seems to make the i386
ALL kernel smaller by 3kB to 4kB.)
Use ifreq_getaddr() twice in es(4).
Whitespace nits.
Use tsleep() rather than delay(). XXX Most of these are probably unnecessary
anyway. In particular, I believe that what xi_full_reset() does is totally
gratuitous after power-cycling the socket; it should only be necessary if we
want to use power-saving mode.
* Don't splnet() in xi_init() -- the callers do that.
* Don't do the enable call in xi_init() -- it should be done only in a process
context so it can sleep.
* Call xi_start() at the end of xi_init() to restart output.
* If the interface is already up, we only need to call xi_set_address() to
change state on SIOCSIFFLAGS.
devices) and a "xi" backend.
My CE2 and CEM2 cards are now probed correctly. However, there are still
some problems with one model of the CE2, and the CEM2 doesn't seem to get
any modem interrupts.
While I'm at it, fix several bugs:
* The tuple scan for the MAC address was broken in multiple ways.
* xi_intr() did not deal well with a shared interrupt.
* We were setting the wrong page number to look at the receive status. (How
did this work???)
* Remove the xi_full_reset() from xi_reset(). Move the parts of
xi_full_reset() needed to undo the effect of xi_stop() into xi_init(). This
allows a stop/init pair to DTRT, and much quicker, as used by various
ioctl()s.
* Set the TRS register before reading the TSO register, as the Linux driver
does. While I'm at it, fix the name.
* Fix numerous problems with xi_set_address(). "Where do I begin?" There's a
chance that multicast works now, but I haven't tested it.
* Explicitly clear the MSR register, and also force SELECT_MII to 0 if we
didn't find any PHYs.
* Clean up some cruft that appears to be bogus.
Probably needs more work, but it's a start.
The driver puts the adapter in promisc mode to receive multicast addresses.
At last set the IFF_PROMISC flag so that the upper layer filters frames
that are not for us.
Sure, the real fix would be to get multicast filters working ...
- implement SIMPLEQ_REMOVE(head, elm, type, field). whilst it's O(n),
this mirrors the functionality of SLIST_REMOVE() (the other
singly-linked list type) and FreeBSD's STAILQ_REMOVE()
- remove the unnecessary elm arg from SIMPLEQ_REMOVE_HEAD().
this mirrors the functionality of SLIST_REMOVE_HEAD() (the other
singly-linked list type) and FreeBSD's STAILQ_REMOVE_HEAD()
- remove notes about SIMPLEQ not supporting arbitrary element removal
- use SIMPLEQ_FOREACH() instead of home-grown for loops
- use SIMPLEQ_EMPTY() appropriately
- use SIMPLEQ_*() instead of accessing sqh_first,sqh_last,sqe_next directly
- reorder manual page; be consistent about how the types are listed
- other minor cleanups
