0fb233923b
do the former at one more place
1998-06-17 20:48:02 +00:00
39452d9720
avoid sign extension if a character >=128 is passed
1998-06-17 20:44:16 +00:00
651b44e211
Rework the way kernel include files are installed. In the new method,
...
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
1998-06-12 23:22:30 +00:00
96840772f5
reserve the VGA BIOS area (but don't worry if it fails)
1998-06-12 18:41:01 +00:00
ab7bc85ff7
Pull in <sys/timepps.h> here so that other things that include comvar.h
...
will compile.
1998-06-11 02:01:58 +00:00
bbc2d1522a
PPS support from April, reworked and extended to match the PPS-API
...
Internet Draft (draft-mogul-pps-api-02.txt).
1998-06-10 12:06:23 +00:00
de7be831ac
Make this compile with the recent ISA DMA changes.
1998-06-10 10:24:13 +00:00
4ad627c09b
Do the unaligned buffer fixup without copying data, more-or-less lifted
...
from the Shark CS8900 driver.
1998-06-10 01:15:50 +00:00
be62e9cb1b
Nuke __BROKEN_INDIRECT_CONFIG.
1998-06-09 07:35:06 +00:00
e41f7ca1b8
Make this build w/ EGCS.
1998-06-08 07:11:51 +00:00
e12c6ddaf2
No need for an explicitly-sized type for sc_flags.
1998-06-08 07:06:41 +00:00
b91a2393c1
the AM7990 is a controller, not a "card"; repair a misleading diagnostic.
1998-06-07 08:08:20 +00:00
573196b6ba
Check for the ether broadcast address in promiscuous mode (PR#5527).
1998-06-04 20:35:44 +00:00
770c4bfb9d
Make this compile with WDDEBUG
1998-06-04 02:27:33 +00:00
5852faaf84
Device driver for the SMC 83c170 Ethernet PCI Integrated Controller (EPIC/100)
...
used in the SMC EtherPower II.
Media control isn't yet supported, due to some MII infrastructure
problems which I hope to address soon. This isn't a huge deal, since
the PHY defaults to auto-negotiate mode.
Also, the device just programs the multicast hash table to accept all
multicast, to avoid a hardware bug that causes the multicast address
filter to lose in 10Mb/s mode. This bug will be fixed in a more sane
way once the media control issues are dealt with.
1998-06-02 01:29:41 +00:00
b84dbbb37c
Put definitions and subroutines needed for all PC display adapters
...
(MGA/GCA and compatibles) into global headers / source files.
Let the VGA driver use them.
1998-05-28 16:48:40 +00:00
769e4e6e81
Another bug fix (clear transmit done before trying to queue more transmits).
1998-05-28 03:07:49 +00:00
dd77920e3e
Only enable transmit done interrupts when output ring is full.
1998-05-27 14:01:02 +00:00
5fb5017c94
Fix syncing of consumer block.
1998-05-27 01:17:53 +00:00
5442fd5420
If we have an NCR53CF9x (indicated by the front-end by setting a flag
...
in the softc's new "features" word), set FSCSI bit in CFG3 if the sync
period is <= 200ns, or clear it otherwise.
1998-05-26 23:17:34 +00:00
1f8a0caf0a
Success! With these changes, the DEFTA now under NetBSD/pmax!!
1998-05-26 15:33:16 +00:00
2d80e4786e
Verify the driver work if PDQ_NO_BUS_DMA is defined.
1998-05-25 21:24:21 +00:00
05f603434f
More pmax coherency stuff. Getting close..
1998-05-24 22:37:23 +00:00
144c41e986
Fix dmamap leakages. fix transmit bug. fix receive bugs. fix mips
...
coherency problems.
1998-05-24 21:40:05 +00:00
18319c0048
Changes so that these compile on NetBSD/alpha as well as NetBSD/i386.
1998-05-23 18:32:29 +00:00
9eb77bf49a
Change 21040 modes slightly. Prevent infinite autosense loop of 21143 that
...
is not connected. Make TULIP_STS_LINFAIL only valid for chips with that
status bit defined.
1998-05-22 18:50:59 +00:00
cfbb5f3f21
Add bus_dma(9) support for the DEFxA FDDI driver
1998-05-21 20:44:02 +00:00
74545baf39
Add a Yamaha OPL3-SA3 driver and clean up all AD1848 drivers.
...
Submitted by Constantine Sapuntzakis <csapuntz@reeducation-labor.lcs.mit.edu>
and originally written for OpenBSD.
1998-05-20 16:19:41 +00:00
11c8871c83
Erase spurious end-of-comment.
1998-05-20 16:06:56 +00:00
9299239520
Cirrus Logic CD1190 parallel port chip definitions; from Iain Hibbert.
1998-05-20 14:47:36 +00:00
9c1918e458
Add CD1400_PAR_FIFO_SIZE.
1998-05-20 00:03:11 +00:00
051be14326
Correct copyright date.
1998-05-17 16:46:06 +00:00
7bd61ed6be
needed for VGA text attributes
1998-05-14 23:11:03 +00:00
95bdb660ed
Simple screen attribute handling for wscons.
...
The graphics device driver passes a "default attribute" for normal text
output to the wscons framework. If the emulation module needs more
attributes (for different "renditions") it can allocate them via a
callback.
For now, only the "sun" emulation makes use of it.
1998-05-14 20:49:55 +00:00
1442b419df
Fix alignment crashes on Alphas...
1998-05-14 18:24:00 +00:00
e72782a137
Driver for Essential Communications' RoadRunner HIPPI (800 Mb/sec network)
...
card. With some modification, this could probably also work for their
Gigabit Ethernet card based on the same chipset...
1998-05-14 00:04:57 +00:00
d2db996158
Fix some arithmetics lossage on typeless pointers.
1998-05-07 21:13:23 +00:00
128cb933b4
there is an (unimportant) difference between 1020 && 1020A
1998-05-05 22:10:36 +00:00
2eb37a4e87
When changing power, wait enough to keep timing constraint
...
described in PCMCIA specification.
1998-05-05 00:37:24 +00:00
6ba2c64ae6
Eliminate the degenerate loop in `ncr53c9x_intr()'. Retain the delay heuristic
...
it implemented under the label `shortcut:' and only use it in these
cases: (1) after successful re-relection, (2) after receiving command-complete
status, and (3) during message-in handshake.
1998-05-04 14:47:48 +00:00
0d3d41fa21
Allocate SCSI message buffers in ncr53c9x_attach(), with a provision
...
for front-ends to override the allocation to avoid alignment
handling in their DMA engines. Note that that ncr53c9x_msgout()
can request a 1 byte DMA transfer that would be difficult to break up.
1998-05-04 11:11:24 +00:00
53d3aa940b
Sync with recent change made to bha.c by mjacob:
...
Cute buglet: you can end up with zero CCBs if there were no targets
seen by the adapter. Always leave a minimum so the adapter can
finish attaching- it may be there w/o targets for a reason.
1998-04-29 01:02:44 +00:00
1acc8b53b5
Cute buglet: you can end up with zero CCBs if there were no targets
...
seen by the adapter. Always leave a minimum so the adapter can
finish attaching- it may be there w/o targets for a reason.
1998-04-28 23:57:53 +00:00
41d55197b4
In wdcintr(), add a catch-all case so that this will compile if no
...
children are configured.
1998-04-28 18:36:07 +00:00
0b2694152f
Update copyright.
1998-04-26 06:03:23 +00:00
eddaea2d53
In LBA mode, always use the `total capacity' count, rather than calculating
...
the capacity based on the c/h/s numbers. In fact, don't use the c/h/s
numbers for much of anything.
For ATA-4 drives or later, always use LBA mode, since it's now required.
Collectively, this allows >8GB disks (like the 12GB Bigfoot) to work.
1998-04-26 05:28:23 +00:00
68096acabd
From Robert V. Baron:
...
Compute the disk block addr at command queing time rather than exec time.
This fix a bug which could lead to data corruption on disk: when a command
was reexecuted after an error condition (from wdcunwedge), the partition
offset was re-added to the block addr, leading to a transfert at the wrong
disk block.
This should fix the problem reported by some laptop's users, where the
first disk read after a suspend/resume returned garbage.
1998-04-23 13:30:39 +00:00
7ba46a56e0
Correct defifintion of the WDCE_MCR and WDCE_ABRT bits: they have been
...
inverted since the begining.
This doesn't change anything, as these bits are not used in the driver.
1998-04-23 10:37:01 +00:00
9663e5f689
Make probe message more consistent with usual practice.
...
From "Soren S. Jorvang" <soren@t.dk>.
1998-04-20 20:58:05 +00:00
112b5de402
Use a stream method for AHC_OUTSL when possible.
1998-04-16 07:13:57 +00:00
d3febbb5aa
Do endian swaps where appropriate. This is currently dependent on 'BYTE_ORDER'
...
since the driver only supports little endian busses.
1998-04-16 07:12:43 +00:00
eda73f204f
The "mi" TGA driver. It's still not of much use on anything but alpha
...
because it depends on initialization by the firmware.
Further, an mi mmap() is needed...
1998-04-15 20:16:30 +00:00
fe60e74148
Add hooks to make exclusive hardware locking possible. This is necessary
...
to make the driver suitable for the atari falcon.
1998-04-07 19:51:57 +00:00
0391896c27
Avoid namespace pollution.
1998-04-07 16:35:42 +00:00
b80f703f77
Fix problem with promicuously received packets. (ie. give them to bpf
...
but not fddi_input).
1998-04-07 13:32:06 +00:00
be4108fec1
Replace direct `sparc_bus_map()' calls with bus space map method.
1998-03-30 14:21:38 +00:00
b70a7e1752
Didn't compile: add variable `bit' removed by mycroft.
1998-03-30 10:35:03 +00:00
d4da63c6c3
Eliminate cs_heldchar. It is not necessary in my version of the driver.
1998-03-30 02:41:21 +00:00
8f597a8744
Oops; make the table const.
1998-03-29 22:36:42 +00:00
a6b8b01d96
Use a 4-bit table to speed up the CRC even further, without increasing the
...
code size too much.
1998-03-29 22:34:27 +00:00
fe7f32954b
Optimize the address CRC routines a bit.
1998-03-29 22:08:03 +00:00
9264961c87
add a short delay (5ms) after ATAPI software reset is done, suggested by
...
Soren S. Jorvang <soren@t.dk>. Apparently some devices Really Want this.
1998-03-27 19:32:15 +00:00
57ca254137
some minor debug printout changes
1998-03-24 23:37:53 +00:00
47d94e4676
fix typo
1998-03-23 16:57:21 +00:00
fc27ffd92c
update some debugging stuff- also turn off possible ULTRA mode for 1020s
1998-03-22 22:02:29 +00:00
ff0635ab25
Fix error in previous change.
1998-03-22 19:36:52 +00:00
3a43fe7109
initial import of VGA driver backend for use with the new wscons code
1998-03-22 15:11:49 +00:00
2b5f7351d2
Split Fujitsu MB9696x based ethernet card driver into bus
...
dependent/independent code and bus.h'fied.
1998-03-22 04:25:36 +00:00
f6dba67570
Read up to 32 bytes. The ESCC *needs* 8, and it doesn't hurt to leave some
...
slop in case there are clone chips with a deeper FIFO.
1998-03-22 02:36:02 +00:00
2bb5067e13
Move the code to wait for carrier on a tty into a common function, since it
...
depends only on device-independent state bits.
Implement SunOS-style `dialout' devices.
1998-03-22 00:55:37 +00:00
019508faee
Well, I don't have a Cyclades board, but I needed the alpha kernels
...
to compile. I made the changes that seemed to make sense tracking the
shift from TS_WOPEN to tp->t_wopen- but they may be wrong. I wasn't
subscribed to tech-kern so I missed the discussion, and C. Hannum
was not particularly enlightening. Sorry if this isn't quite right.
1998-03-21 23:26:15 +00:00
69fe6f242f
Account for changed bus attachment scheme.
1998-03-21 20:11:30 +00:00
834a8ac07a
Fix pasto.
1998-03-21 04:31:10 +00:00
fd620ebb32
Replace TS_WOPEN with t_wopen, per mail on tech-kern.
1998-03-21 04:29:29 +00:00
16566cda09
Remove a bogus initializer.
1998-03-21 04:27:58 +00:00
2ada4b4af1
Replace TS_WOPEN with t_wopen, per mail on tech-kern.
1998-03-21 04:02:47 +00:00
d2551d5b3f
Use bus-dma functions.
1998-03-16 15:36:17 +00:00
6dcfc62169
KNF last change
1998-03-05 22:56:18 +00:00
84c6b9dbd7
Make zs_iflush not loop indefinitly. Some Mac PowerBooks lie about having
...
two SCC channels, and can get stuck in an infinite loop. This change
stops after flushing 4 bytes. Might need upping to 8 bytes if we support
85230 ESCC's.
Idea bounced off of scottr & gwr
1998-03-05 22:03:34 +00:00
713692a2b5
For the Rx:Tx split message change "(undefined)" to "3:5".
1998-03-04 18:10:03 +00:00
5bc7459ebd
Remove `NEW_I82586'
1998-02-28 01:14:57 +00:00
472a1973af
Remove `_NEW_I82586' tag; all drivers using this file have been converted.
1998-02-28 01:07:45 +00:00
64812254d6
Remove some duplicate definitions.
1998-02-27 13:17:25 +00:00
081231b1ad
Add dummy }} after comsoft() to keep ctags(1) bashing on.
1998-02-25 08:32:35 +00:00
e12f85fbc1
Disable the device if we fail to open and nobody else has the device open.
...
(Thanks Charles and Marc for your advices).
1998-02-22 05:09:58 +00:00
11b3fea04a
Fix bonehead error in previous change.
1998-02-22 03:24:58 +00:00
6ad2876b5a
Similar changes to com driver:
...
Arrange to call com_break() and com_modem() at splserial().
It's simpler this way. Really.
1998-02-19 21:26:10 +00:00
84a72d6ff4
Remove stray label from last change.
1998-02-19 09:33:33 +00:00
06ec9f646f
Arrange to call com_break() and com_modem() at splserial().
...
It's simpler this way. Really.
1998-02-19 09:23:38 +00:00
4399060ec9
- Perform all necessary bus_dmamap_sync() operations.
...
- Greatly simplify allocation and DMA mapping of the mailbox and ccbs.
- Be more robust against resource shortage errors, and report errors better.
1998-02-17 03:02:30 +00:00
018aa6e97e
Don't include <dev/scsipi/scsipi_conf.h> twice.
1998-02-13 21:58:40 +00:00
d90485202c
- add defopt's for UVM, UVMHIST and PMAP_NEW.
...
- remove unnecessary UVMHIST_DECL's.
1998-02-10 14:08:44 +00:00
eda74e6121
- Perform all necessary bus_dmamap_sync() operations.
...
- Greatly simplify allocation and DMA mapping of the mailbox and ccbs.
- Be more robust against resource shortage errors, and report errors better.
1998-02-09 10:53:07 +00:00
5fe6759646
Fix serial console support, which was broken by the previous revision:
...
- In the console getc routine, block until a character becomes ready
(no, really, we mean it). This routine should _never_ time out.
- In the console putc routine, if the UART has trouble, do NOT proceed
to print a diagnostic message, which would recursively invoke the
console putc routine ad nauseum.
1998-02-09 10:22:45 +00:00
e08a44b196
- Perform all necessary bus_dmamap_sync() operations.
...
- Greatly simplify allocation and DMA mapping of the mailbox and ccbs.
- Be more robust against resource shortage errors, and report errors better.
1998-02-06 23:06:44 +00:00
9d13bc6e0e
Restore system priority level before return from comopen().
1998-02-06 03:25:34 +00:00
1a8c7604f4
initial import of the new virtual memory system, UVM, into -current.
...
UVM was written by chuck cranor <chuck@maria.wustl.edu>, with some
minor portions derived from the old Mach code. i provided some help
getting swap and paging working, and other bug fixes/ideas. chuck
silvers <chuq@chuq.com> also provided some other fixes.
this is the rest of the MI portion changes.
this will be KNF'd shortly. :-)
1998-02-05 07:59:28 +00:00
a2b24d5571
Change "__BUS_SPACE_NEED_STREAM_METHODS" to "__BUS_SPACE_HAS_STREAM_METHODS".
1998-02-04 14:13:40 +00:00
8abe76d2f0
Add offset and length parameters to bus_dmamap_sync(), used for specifiying
...
partial syncs of a DMA mapping.
1998-02-04 05:12:46 +00:00
a7c5c1ef3c
Add dm_mapsize to bus_dmamap_t and rename BUS_DMAMEM_NOSYNC to
...
BUS_DMA_COHERENT.
1998-02-04 00:32:55 +00:00
drochner