Commit Graph

6179 Commits

Author SHA1 Message Date
fvdl
0b1963121a Add Kirk McKusick's soft updates code to the trunk. Not enabled by
default, as the copyright on the main file (ffs_softdep.c) is such
that is has been put into gnusrc. options SOFTDEP will pull this
in. This code also contains the trickle syncer.

Bump version number to 1.4O
1999-11-15 18:49:07 +00:00
joda
5527afff97 (pccbb_pci_callback): no point in reading the bus number register
twice
1999-11-15 16:19:03 +00:00
nisimura
cc2e1c302a - Reflect changes in ibus_intr_establish() definition.
- More concise way to initialize TC framebuffer device for console.
1999-11-15 09:54:41 +00:00
haya
3be097c31d Handle insertion and removal events more strictly. 1999-11-15 06:08:02 +00:00
haya
89d0a53e2c Fill 0 into CardBus base address registers before a card is
configured.
1999-11-15 06:01:11 +00:00
nisimura
b06e451c53 - No need to include '<machine/autoconf.h>'.
- Nuke tc_badaddr() check from asc_tc because the existency check is already
  done for real TC devices.
- Nuke tc_badaddr() check from asc_ioasic because it is a builtin device
  found in all of IOASIC DECstations.
1999-11-15 05:25:57 +00:00
nisimura
8e061f4876 Make sure TC_IPL_xxx synonymous with IPL_xxx. 1999-11-15 03:45:50 +00:00
nisimura
9c3842f41b Relocate 'struct tc_softc' and several function declarations useful
to outsides of 'tc.c' into 'tcvar.h'.
1999-11-15 03:41:49 +00:00
soren
b202ac1466 Allow SCSI_DELAY to be shorter than 2 seconds. 1999-11-14 18:06:09 +00:00
augustss
5f8274b5a6 Get transfer status right on short transfers. From FreeBSD, Nick Hibma. 1999-11-13 23:58:01 +00:00
matthias
b45486b2a2 Make this work again by adding XS_CTL_ASYNC to the SCSI requests in
se_ifstart and se_recv.
1999-11-13 18:03:34 +00:00
soren
748b241afb Export softc. 1999-11-13 13:40:28 +00:00
mjacob
5f4088eb26 Hide function definition within ifdef's is becomes active in. 1999-11-12 19:11:25 +00:00
joda
f9bf746086 (cardbus_attach_card): don't free cc 1999-11-12 18:18:38 +00:00
joda
4278cf451e if the image size is zero, assume it really means one block 1999-11-12 18:17:36 +00:00
thorpej
4bdf6bd731 Call mii_down() as appropriate. 1999-11-12 18:14:17 +00:00
thorpej
bca88a28c8 Add mii_down(), which is used by MAC drivers to inform PHYs that the
interface is now down.  PHYs use this to cancel pending asynchronous
operations.
1999-11-12 18:12:59 +00:00
is
1c37111492 Identification of DOMEX PCI-SCSI board, by Thilo Manske, PR 8772. 1999-11-12 12:03:32 +00:00
augustss
0d2fabdf26 A number of stylistic changes to increase readability (many suggested
by Nick Hibma):
	use NULL not 0
	declare all local definitions static
	rename s/usbd_request/usbd_xfer/ s/reqh/xfer/
	rename s/r/err/
	use implicit test for no err
	KNF
1999-11-12 00:34:57 +00:00
augustss
c8ad47986a Regen. 1999-11-12 00:26:39 +00:00
augustss
505ab77387 Add a modem from ELSA. 1999-11-12 00:26:13 +00:00
scw
3981e235b7 Zero is a valid value for ch_tcor and ch_rcor, so be a bit more conservative
when deciding if the baud-rate should be changed. (Spotted by Bruce Martin)
Also fix the mask used when setting the Rx FIFO threshold to zero. I don't
yet understand how the Rx side worked with the code as it was. ;-}
1999-11-11 09:38:43 +00:00
augustss
445d6f8e64 Regen. 1999-11-10 19:47:39 +00:00
augustss
f2725f06b8 Add another Quickcam. 1999-11-10 19:46:40 +00:00
drochner
3bc4cec200 allow to set multiple keyboard "variants" simultanously.
Follows PR kern/8456 by Michael Eriksson <eramore@era-t.ericsson.se>,
implemented diffently.
1999-11-10 16:49:38 +00:00
matt
391c8e434d regen 1999-11-10 15:56:39 +00:00
matt
805b56adb4 Add Entrega USB Serial->DB9 widget 1999-11-10 15:55:51 +00:00
leo
0c76b12125 Give lp->d_type a value other than 'unknown'. When the model is "ST506",
the d_type field becomes DTYPE_ST506, otherwise it will be set to DTYPE_ESDI.
1999-11-10 14:11:34 +00:00
augustss
8276207b08 Regen. 1999-11-10 12:31:31 +00:00
augustss
8436192416 Add two more devices. 1999-11-10 12:31:01 +00:00
mycroft
f8934aa2f6 Modification to the previous:
We still have to preload the command, when selecting without ATN.  (We could
probably avoid this by being more careful in the interrupt handler...)
1999-11-10 05:02:53 +00:00
mycroft
58fec0d55a When sending a REQUEST SENSE, do *not* attempt to create an I_T_L nexus. This
is technically wrong, and some targets (like my 4x NEC CD-ROM drive) misbehave
when we do.
1999-11-10 04:21:30 +00:00
mycroft
105a2438f9 Fix an obvious bug is some diagnostic code; we must lower our spl again... 1999-11-10 04:19:59 +00:00
mycroft
5b75863870 A residual after select with DMA step 2 is legitimate (in fact, *not* having a
residual would probably be cause for concern), so don't spew about it.
1999-11-10 00:42:37 +00:00
augustss
e9fc8103ca Make detach wait for interrupts to finish.
Bail out in interrupt routine when device is dying.
1999-11-09 16:52:14 +00:00
augustss
3ea93b7669 Make sure to call vdevgone() on all devices when deteching. 1999-11-09 16:50:47 +00:00
joda
c7cca9cd39 make this compile with CARDBUS_DEBUG 1999-11-09 15:03:59 +00:00
sommerfeld
dea88f1c20 Completely rewrite receive processing to avoid sleep-deprivation-induced
brain damage and infinite loops, and lousy RTTs

Also, flush tx queues when reassociating with AP and when taking the
interface down.
1999-11-09 14:58:07 +00:00
haya
e54d837b8b Maintenance CardBus/PCI extension ROM mapping routine.
1. Make Extension ROM not to be mapped on I/O space.
2. Do not check the bus-space indicator in ROM register.
1999-11-09 09:20:30 +00:00
nisimura
2924b6835a Fix errors in sfb_copycols() of the forward (left-to-right) case. 1999-11-09 08:25:31 +00:00
oster
3949e74f78 If we have a choice: do not trust the parity disk for read
balancing in a RAID 1 set if we know that the parity might not
be up-to-date.  Thanks to Thor for bringing this to my attention.
1999-11-09 03:07:20 +00:00
joda
1b686307cb correct number of BAR:s in cardbus_cis_info 1999-11-08 20:21:24 +00:00
joda
fe2d79ec9a Let decode_tuples take function to call for each tuple, and use this
to get some vital information from the CIS (some network cards need
this to get the mac-address). This should be merged with the related
code for PCMCIA cards, but that requires more thought.
1999-11-08 20:19:10 +00:00
joda
dbb2685da6 add some bare-bones CIS information to the attach_args struct 1999-11-08 19:59:08 +00:00
joda
f6be3b394d regen 1999-11-08 19:57:32 +00:00
joda
19ff47781e copy xircom entries from pcidevs 1999-11-08 19:57:13 +00:00
sommerfeld
1cfdb728d0 avoid touching freed mbuf after allocation failure. 1999-11-08 15:56:16 +00:00
sommerfeld
66ab262b1c add a bunch of debug printfs under IFF_DEBUG and IFF_LINK2;
turn on IFF_DEBUG to trace the management protocol goo.
turn on IFF_LINK2 as well to see beacons.
1999-11-08 15:45:00 +00:00
sommerfeld
94bb856781 misc cleanups; seems to work a little better in a dense-AP environment now.
1) ignore probe requests rather than printing "unknown mgmt subtype"
	(cosmetic)
 2) don't panic if mget of the 2nd mbuf in a chain fails (patch from MCR)
	(though that whole function badly needs to be rewritten)
 3) be a little more tenacious about hanging on to an access point.
1999-11-08 13:24:00 +00:00
augustss
9cec807b1c Return -1 from wsmux_displayioctl() if no muxes components like the ioctl(). 1999-11-08 10:10:25 +00:00