Change the name of structure ieee80211_bss to ieee80211_node, which is
used for management of stations in hostap mode, and peers in ibss mode.
Split off ic_opmode, ic_phytype from ic_flags.
Preparation to merge 'wi' driver into 80211subr.c.
Setup sequence obtained from Krups OFW with some CyberPro-specific
magic from Linux driver. The driver still has a lot of hardcoded
stuff, but it is useful enough to bring up wscons on netwinder.
XXX: Proper console attachment needs to be written (the driver was
originally developed on sparc, where our approach to attaching console
is totally different).
Caveat emptor!
by me:
* Speed up reading/writing buffers from the hardware by avoiding
slow forward seeks. In preparation to use the optimization, do
not read overlapping bytes. This is currently disabled, but can
be enabled with OPTIMIZE_RW_DATA.
* Hand 802.11 and Prism-specific frames to BPF. User can watch these
frames by specifying an alternate DLT to e.g. tcpdump(8).
* Add support for SIOC[SG]80211BSSID and SIOC[SG]80211CHANNEL.
* Issue join requests and track join/create state through link-status
notifications.
* Split wi_rxeof into separate routines for receiving Ethernet II,
802.11 data, and 802.11 management frames.
* Bug fix: Account for aligning m_data to a word boundary in the Rx
buffer size check.
* Bug fix: Check for LLC/SNAP even if the firmware tells us the frame
is Ethernet II, as the firmware sometimes gets this wrong.
* Process as many events as possible when we get an interrupt, using
a simple heuristic to avoid reprocessing an event (which can have
bad side-effects). Clamp the time spent in the interrupt handler
to 4ms.
* Redo the timeout loops to be consistent and less prone to error.
* Add delays to timeout loops which were missing them, so that a
fast CPU won't win the race.
* Borrow some timeout loop values from the linux-wlan-ng driver,
which seems to reflect a high level of clue (due to direct support
from Intersil).
* Get rid of silly wi_read_data(..., len + 2) idiom; simply round up
in wi_read_data() and wi_write_data(). Also, protect against a
length of 0.
* Name some frequently-used constants. Correct spelling. Other style nits.
* Bug fix: On Prism, set Create IBSS register to 0 *always*. The meaning
of Create IBSS == 1 is join an IBSS or *ESS*, and we do not want to
join an ESS, because that would put us in an inconsistent state. 0
is the right value for Prism.
* Bug fix: Clean up state at the top of wi_init(), in the event that
we don't reach the bottom.
* Simplify wi_start() by always providing an RFC1042-encoded 802.11
frame to the firmware.
* Larval powersave support for HostAP mode, enabled by WI_HOSTAP_POWERSAVE.
* Bug fix: Call wi_stop() from wi_shutdown().
* Bug fix: sync media options with HostAP mode in wi_sync_media().
* In wi_media_status(), inquire firmware for current media state if
media == auto. From FreeBSD.
* Clean up the way buffer lengths are computed by using pointer
arithmetic rather than magic constants.
* Swap the order of comparisons in addr_cmp() for speed.
* Bug fix: Send ReAssoc Response instead of Assoc Response to a
ReAssoc Request.
* Bug fix: Copy SSID using the correct size.
* Give more meaningful names to offsets in a wi_frame.
* Bug fix: Assign the right values to the named constants for
Rx frame encoding.
* Get rid of useless SNAP constants.
This merge changes the device switch tables from static array to
dynamically generated by config(8).
- All device switches is defined as a constant structure in device drivers.
- The new grammer ``device-major'' is introduced to ``files''.
device-major <prefix> char <num> [block <num>] [<rules>]
- All device major numbers must be listed up in port dependent majors.<arch>
by using this grammer.
- Added the new naming convention.
The name of the device switch must be <prefix>_[bc]devsw for auto-generation
of device switch tables.
- The backward compatibility of loading block/character device
switch by LKM framework is broken. This is necessary to convert
from block/character device major to device name in runtime and vice versa.
- The restriction to assign device major by LKM is completely removed.
We don't need to reserve LKM entries for dynamic loading of device switch.
- In compile time, device major numbers list is packed into the kernel and
the LKM framework will refer it to assign device major number dynamically.
back-end to indicate that the device always sees reads as 32-bit
transactions, even if the host does 8 or 16-bit reads.
This is necessary for the SH-5 "Cayman" on-board ethernet. The SMsC part
is behind an FPGA which maps all cpu reads to 32-bits transactions.
- aging ang clear inactivity stations
- DTIM field in beacon/probe response.
- ignore IFF_PROMISC for hostap mode, since 802.11 has 3 address fields,
so that promisc mode is not required for AP function.
written (i.e. is used uninitialised). The esiop SCRIPT may do this in some
circonstances (and it is safe) so bus_space_set_region_4() the RAM in
reset routine.
Problem reported and fix tested by Allen Briggs.
- Fix one typo (instead of two disable_rx, one disable_rx and one disable_tx)
[The other bug fix isn't appropriate since the was OACTIVE is dealt with
has been changed in NetBSD.]
mediaopt adhoc 802.11 adhoc (IBSS) mode. IBSS creation is enabled
for cards which can create IBSS.
mediaopt adhoc,flag0 old lucent adhoc demo mode.
Note that [adhoc] media options for wi driver was used for adhoc demo mode,
which is NOW CHANGED.
load f/w images > 0x7fff words), set ISP_FW_ATTR_SCCLUN. We explicitly
don't believe we can find attributes if f/w is < 1.17.0, so we have to
set SCCLUN for the 1.15.37 f/w we're using manually- otherwise every
target will replicate itself across all 16 supported luns for non-SCCLUN
f/w.
EXCLUDE_UNENCRYPTED bit in the WI_RID_P2_ENCRYPTION value if we are
in shared key mode. Symbol cards, just to be different, supposedly
always want the EXCLUDE_UNENCRYPTED bit set (confirmed with the
Linux orinoco and spectrum24 drivers).
* Flesh out the Host-AP WEP transmit side. Note this does not yet
work properly; the frame as seen by the receiver FCS's incorrectly.
Both changes from OpenBSD. Not confirmed whether or not Host-AP WEP
works with OpenBSD (mail sent to millert).
WEP for APs is not yet implemented, but without WEP, this works well
enough for my laptop to associate with an AP running this code.
Adapted from OpenBSD.
in this info based on firmware type and version. Replace "wi_has_wep"
with a flag.
* For cards which support IBSS, add "ibss" has a media option.
* For cards which support CREATE_IBSS, add "ibss-master" as a media
option.
* Use the "ibss" and "ibss-master" media options to determine if
we should go into IBSS mode and/or create the IBSS.
* Internally convert between the generic WI_PORTTYPE_IBSS and the
value the firmware wants to use for IBSS.
* When setting the IBSS name, if a desired-SSID is set, and we're
an ibss-master, write the desired-SSID into the own-SSID slot.
This ensures that "ifconfig wi0 nwid FOO" will do the expected
thing.
* Only set the roaming mode if the card supports roaming.
From OpenBSD.
Always init chip via I/O space.
Map only I/O registers we actually need.
Automatically detect if we need to do bswapping
Add (untested) code to use automagic bswap on CyberPro.
Report video memory amount.
Report if/how bswapping is done.
-treat the builtin font like any other font at runtime
-for that, copy it to malloc()'d memory during attach()
-in early console initialization, if we have to consider a broken card
(VGA_CONSOLE_ATI_BROKEN_FONTSEL), copy the builtin font to another
location in font ram; the attach() code will do the rest
put the "quirk" code into effect again
found on many (all?) of PCI-based ATI graphics cards. It is fully optional
and can be enabled by adding `options VGA_CONSOLE_ATI_BROKEN_FONTSEL'
to config file.
- Temporarily remove `quirk' mechanism. Similar code already exists
in pci_quirks.c.
tsutsui