to the controller. This is compatible with the linux and FreeBSD
implementations.
Add the needed conversion for mfi ioctls in COMPAT_LINUX
Allocate a character major number, and create /dev/mfi0 by default
on amd64 and i386.
This allows (along with a hand-created /emul/linux/proc/devices file)
to run the MegaCLI linux binary provided by LSI.
hpcmips defines one in MD majors, but it's not listed in
etc/etc.hpcmips/MAKEDEV.conf, so I assume actual files are never
created in users' filesystems.
Prompted By: pooka
- Designed to be fully MP-safe and highly efficient.
- Tables/IP sets (hash or red-black tree) for high performance lookups.
- Stateful filtering and Network Address Port Translation (NAPT).
Framework for application level gateways (ALGs).
- Packet inspection engine called n-code processor - inspired by BPF -
supporting generic RISC-like and specific CISC-like instructions for
common patterns (e.g. IPv4 address matching). See npf_ncode(9) manual.
- Convenient userland utility npfctl(8) with npf.conf(8).
NOTE: This is not yet a fully capable alternative to PF or IPFilter.
Further work (support for binat/rdr, return-rst/return-icmp, common ALGs,
state saving/restoring, logging, etc) is in progress.
Thanks a lot to Matt Thomas for various useful comments and code review.
Aye by: board@
It will replace azalia(4) after testing.
To use, comment out azalia in your kernel configuration and uncomment the
hdaudio and hdafg lines so it reads:
# Intel High Definition Audio
hdaudio* at pci? dev ? function ?
hdafg* at hdaudiobus?
You should also:
cd /dev
sh MAKEDEV audio
the base NetBSD system. It uses Linux LVM2 tools and our BSD licensed
device-mapper driver.
The device-mapper driver can be used to create virtual block devices which
maps virtual blocks to real with target mapping called target. Currently
these targets are available a linear, zero, error and a snapshot (this is
work in progress and doesn't work yet).
The lvm2tools adds lvm and dmsetup binary to based system, where the lvm
tool is used to manage and administer whole LVM and the dmestup is used to
communicate iwith device-mapper kernel driver. With these tools also
a libdevmapper library is instaled to the base system.
Building of tools and driver is currently disable and can be enabled with
MKLVM=yes in mk.conf. I will add sets lists and rc.d script soon.
Oked by agc@ and cube@.
"retro" computers, but NetBSD also runs a growing number of rare
and retro add-on cards. With this patch, NetBSD supports the IDEC
Supervision/16, a black&white image capture board for the 16-bit
ISA bus. Approximate date of manufacture: 1991. Total instances
known to be in use throughout the world: one.
Coming soon; isvctl(8), the utility program for capturing 8-bit,
512x480 images at speeds of up to 6 frames per second.
via the standard audio interfaces is redirected back to userland as raw
PCM data on /dev/padN.
One example usage is to stream audio to an AirTunes compatible device using
rtunes (http://www.nazgul.ch/dev_rtunes.html), ie:
$ rtunes - < /dev/pad0
$ mpg123 -a /dev/sound1 blah.mp3
Another option is to capture audio output from eg. Real Player, by simply
instructing Real Player to output to /dev/sound1, and running:
$ cat /dev/pad0 > blah.pcm
Rip the transport code completely out of puffs and generalize it
into an independent module which will be used for multiple purposes
in the future. This module is called the Pass-to-Userspace
Transporter (known as "putter" among friends).
This is very much work-in-progress and one dependency with puffs
remains: the request framing format.
The device name is still /dev/puffs, but that will change soon.
Users of puffs need the following in their kernel configs now:
pseudo-device putter
device controllers, and more specifically raid controllers.
Add a new sensor type, ENVSYS_DRIVE, to report drive status. From OpenBSD.
Add bio and sysmon support to mfi(4). This allow userland to query
status for drives and logical volumes attached to a mfi(4) controller. While
there fix some debug printfs in mfi so they compile.
Add bio(4) to amd64 and i386 GENERIC.
- if allocated in the MI range, it breaks the builds for ports that do
not use it
- if allocated in the MD range, 3ware's tw_cli tool will break because it
hardcodes the major
remove pseudo-device btdev(4) and inherent limitations
add bthub(4) which autoconfigures at bluetooth controllers as they
are enabled. bluetooth devices now attach here.
btdevctl(8) and its cache is updated to handle new semantics
etc/rc.d/btdevctl is updated to configure devices from a list
in /etc/bluetooth/btdevctl.conf
Change the way in which bluetooth devices attach to system. The
new way is for devices to attach directly to a btdevN device via
its own control file /dev/btdevN.
- bthub(4) is replaced by btdev(4).
- /dev/bthubctl is replaced by /dev/btdevN.
- configuration now uses proplib(3) property lists.
- btcontrol(8) updated to use new API, and now uses private
- XML config file /var/db/btdev.xml.
commands to the controller.
Add a amrctl(8) control tool, which for now only allows to get status
from the adapter (status of adapter, logical volumes and and individual
drives).
From FreeBSD, with some adjustements by Andrew Doran and me.
of digital video recorders popular in Europe and Australia.
These devices have a USB client port which can be used to upload and
download recordings (and other files, such as MIPS binaries for execution
on the DVR's CPU) to/from their internal hard disk, in addition to some
other operations on files and directories.
riastradh