third operators of a ?: operation shoud (amongst other conditions)
either both be integer type, or both void type. cast the second
to (void) then, as log() is already a void and no result is desired.
switches and put into separate functions
- always KASSERT(solocked(so)) even if not implemented
(for PRU_CONNECT2 only)
- replace calls to pr_generic() with req = PRU_CONNECT2 with calls to
pr_connect2()
- replace calls to pr_generic() with req = PRU_PURGEIF with calls to
pr_purgeif()
put common code from unp_connect2() (used by unp_connect() into
unp_connect1() and call out to it when needed
patch only briefly reviewed by rmind@
separate functions
xxx_send(struct socket *, struct mbuf *, struct mbuf *,
struct mbuf *, struct lwp *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_SEND with calls to
pr_send()
rename existing functions that operate on PCB for consistency (and to
free up their names for xxx_send() PRUs
- l2cap_send() -> l2cap_send_pcb()
- sco_send() -> sco_send_pcb()
- rfcomm_send() -> rfcomm_send_pcb()
patch reviewed by rmind
pr_generic() usrreq switches and put into separate functions
xxx_disconnect(struct socket *)
xxx_shutdown(struct socket *)
xxx_abort(struct socket *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req =
PRU_{DISCONNECT,SHUTDOWN,ABORT}
with calls to pr_{disconnect,shutdown,abort}() respectively
rename existing internal functions used to implement above functionality
to permit use of the names for xxx_{disconnect,shutdown,abort}().
- {l2cap,sco,rfcomm}_disconnect() ->
{l2cap,sco,rfcomm}_disconnect_pcb()
- {unp,rip,tcp}_disconnect() -> {unp,rip,tcp}_disconnect1()
- unp_shutdown() -> unp_shutdown1()
patch reviewed by rmind
into seaparate functions
xxx_listen(struct socket *, struct mbuf *)
- always KASSERT(solocked(so)) and KASSERT(nam != NULL)
- replace calls to pr_generic() with req = PRU_CONNECT with
pr_connect()
- rename existin {l2cap,sco,rfcomm}_connect() to
{l2cap,sco,rfcomm}_connect_pcb() respectively to permit
naming consistency with other protocols functions.
- drop struct lwp * parameter from unp_connect() and at_pcbconnect()
and use curlwp instead where appropriate.
patch reviewed by rmind
switches and put into separate functions
xxx_bind(struct socket *, struct mbuf *)
xxx_listen(struct socket *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_BIND with call to
pr_bind()
- replace calls to pr_generic() with req = PRU_LISTEN with call to
pr_listen()
- drop struct lwp * parameter from at_pcbsetaddr(), in_pcbbind() and
unp_bind() and always use curlwp.
rename existing functions that operate on PCB for consistency (and to
free up their names for xxx_{bind,listen}() PRUs
- l2cap_{bind,listen}() -> l2cap_{bind,listen}_pcb()
- sco_{bind,listen}() -> sco_{bind,listen}_pcb()
- rfcomm_{bind,listen}() -> rfcomm_{bind,listen}_pcb()
patch reviewed by rmind
welcome to netbsd 6.99.48
switches and put into separate functions
xxx_sendoob(struct socket *, struct mbuf *, struct mbuf *)
xxx_recvoob(struct socket *, struct mbuf *, int)
- always KASSERT(solocked(so)) even if request is not implemented
- replace calls to pr_generic() with req = PRU_{SEND,RCV}OOB with
calls to pr_{send,recv}oob() respectively.
there is still some tweaking of m_freem(m) and m_freem(control) to come
for consistency. not performed with this commit for clarity.
reviewed by rmind
into a separate function xxx_accept(struct socket *, struct mbuf *)
note: future cleanup will take place to remove struct mbuf parameter
type and replace it with a more appropriate type.
patch reviewed by rmind
usrreq switches and put into separate functions
xxx_{peer,sock}addr(struct socket *, struct mbuf *).
- KASSERT(solocked(so)) always in new functions even if request
is not implemented
- KASSERT(pcb != NULL) and KASSERT(nam) if the request is
implemented and not for tcp.
* for tcp roll #ifdef KPROF and #ifdef DEBUG code from tcp_usrreq() into
easier to cut & paste functions tcp_debug_capture() and
tcp_debug_trace()
- functions provided by rmind
- remaining use of PRU_{PEER,SOCK}ADDR #define to be removed in a
future commit.
* rename netbt functions to permit consistency of pru function names
(as has been done with other requests already split out).
- l2cap_{peer,sock}addr() -> l2cap_{peer,sock}_addr_pcb()
- rfcomm_{peer,sock}addr() -> rfcomm_{peer,sock}_addr_pcb()
- sco_{peer,sock}addr() -> sco_{peer,sock}_addr_pcb()
* split/refactor do_sys_getsockname(lwp, fd, which, nam) into
two functions do_sys_get{peer,sock}name(fd, nam).
- move PRU_PEERADDR handling into do_sys_getpeername() from
do_sys_getsockname()
- have svr4_stream directly call do_sys_get{sock,peer}name()
respectively instead of providing `which' & fix a DPRINTF string
that incorrectly wrote "getpeername" when it meant "getsockname"
- fix sys_getpeername() and sys_getsockname() to call
do_sys_get{sock,peer}name() without `which' and `lwp' & adjust
comments
- bump kernel version for removal of lwp & which parameters from
do_sys_getsockname()
note: future cleanup to remove struct mbuf * abuse in
xxx_{peer,sock}name()
still to come, not done in this commit since it is easier to do post
split.
patch reviewed by rmind
welcome to 6.99.47
were not filling in struct stat.
decision made after further discussion with rmind and investigation of
how other operating systems behave. soo_stat() is doing just enough to
be able to call what gets returned valid and thus justifys a return of
success.
additional review will be done to determine of the pr_stat functions
that were already returning EOPNOTSUPP can be considered successful with
what soo_stat() is doing.
not fill in struct stat instead of returning success.
* in pr_stat remove all checks for non-NULL so->so_pcb except where the
pcb is actually used (i.e. cases where we don't return EOPNOTSUPP).
proposed on tech-net@
separate xxx_stat(struct socket *, struct stat *) functions.
* replace calls using pr_generic with req == PRU_SENSE with pr_stat().
further change will follow that cleans up the pattern used to extract the
pcb and test for its presence.
reviewed by rmind
abuse of pointer to struct mbuf type.
param2 changed to u_long type and uses parameter name 'cmd' (ioctl command)
param3 changed to void * type and uses parameter name 'data'
param4 changed to struct ifnet * and uses parameter name 'ifp'
param5 has been removed (formerly struct lwp *) and uses of 'l' have been
replaced with curlwp from curproc(9).
callers have had (now unnecessary) casts to struct mbuf * removed, called
code has had (now unnecessary) casts to u_long, void * and struct ifnet *
respectively removed.
reviewed by rmind@
into separate xxx_ioctl() functions.
* place KASSERT(req != PRU_CONTROL) inside xxx_userreq() as it is now
inappropriate for req = PRU_CONTROL in xxx_userreq().
* replace calls to pr_generic() with req = PRU_CONTROL with pr_ioctl().
* remove & fixup references to PRU_CONTROL xxx_userreq() function comments.
* fix various comments references for xxx_userreq() that mentioned
PRU_CONTROL as xxx_userreq() no longer handles the request.
a further change will follow to fix parameter and naming inconsistencies
retained from original code.
Reviewed by rmind@
- Replace ipintrq and ip6intrq with the pktqueue mechanism.
- Eliminate kernel-lock from ipintr() and ip6intr().
- Some preparation work to push softnet_lock out of ipintr().
Discussed on tech-net.
dismantling of pr_usrreq in the protocols; no functional change intended.
PRU_ATTACH/PRU_DETACH changes will follow soon.
Bump for struct protosw. Welcome to 6.99.62!
consttime_memequal is the same as the old consttime_bcmp.
explicit_memset is to memset as explicit_bzero was to bcmp.
Passes amd64 release and i386/ALL, but I'm sure I missed some spots,
so please let me know.
outdated pointers and pass ESP data to UPD-sockets.
While here, simplify the code and remove the IPSEC_NAT_T option; always
compile nat-traversal in so that it does not bitrot.
Without this change, using ESP tunnels with FAST_IPSEC on a 2-cpu i386
machine results in an mbuf leak. This change was tested in netbsd-6.
When FAST_IPSEC is enabled and a tunnel is set up, after the
outer packet is stripped off, FAST_IPSEC queues the inner
packet on the appropriate queue (ipinstrq or ip6instrq).
These queues require the KERNEL_LOCK to be held before
using the queue, and the FAST_IPSEC code did not take the
KERNEL_LOCK as required.
KERNEL_LOCK and KERNEL_UNLOCK_ONE calls have been added.
If a struct ifnet instance is passed to the if_handoff
function which does this queuing, the interface's
if_start function may be called. Some hardware devices
require KERNEL_LOCK to be held; others do not. Looking
at the body of NetBSD code, other places where an if_start
function is called, KERNEL_LOCK is held. Thus, the lock is
not released in if_handoff until after the if_start function
is called. In practice, having the kernel lock when
if_start is called makes no difference - there is not
a single instance in all of the NetBSD code where
if_handoff is passed an instance of struct ifnet.
This commit is the work of Bev Schwartz of BBN.
Approved for Public Release, Distribution Unlimited
This material is based upon work supported by the Defense Advanced Research
Projects Agency and Space and Naval Warfare Systems Center, Pacific, under
Contract No. N66001-09-C-2073.
abd userland, as proposed on tech-security, with explicit_bzero using
a volatile function pointer as suggested by Alan Barrett.
Both do what the name says. For userland, both are prefixed by "__"
to keep them out of the user namespace.
Change some memset/memcmp uses to the new functions where it makes
sense -- these are just some examples, more to come.
passed to sysctl_createv() actually matches the declared type for
the item itself.
In the places where the caller specifies a function and a structure
address (typically the 'softc') an explicit (void *) cast is now needed.
Fixes bugs in sys/dev/acpi/asus_acpi.c sys/dev/bluetooth/bcsp.c
sys/kern/vfs_bio.c sys/miscfs/syncfs/sync_subr.c and setting
AcpiGbl_EnableAmlDebugObject.
(mostly passing the address of a uint64_t when typed as CTLTYPE_INT).
I've test built quite a few kernels, but there may be some unfixed MD
fallout. Most likely passing &char[] to char *.
Also add CTLFLAG_UNSIGNED for unsiged decimals - not set yet.
plunky