bfdc6759fb
Don't rely on the receive descriptor's BCAST/MCAST status bits. Test the
...
Ethernet destination address to see if it's multicast.
2000-02-08 00:22:13 +00:00
52a2804a5c
Add a new function call to the ISA DMA API: isa_dmamaxsize(), which returns
...
the maximum transfer size for the specified DMA channel. Make all clients
of ISA DMA use this call to determine their maximum transfer size.
2000-02-07 22:07:27 +00:00
1d46ce41ea
Enable the hme ethernet driver.
2000-02-07 21:24:48 +00:00
b9ff560bcc
Don't print "... not configured" message for non real devices
...
like escc-legacy.
2000-02-07 20:30:05 +00:00
5c83cd7b9c
Bump version to 1.4S -- b_rawblkno.
2000-02-07 20:19:13 +00:00
fe551f0e64
Fix a bug in disksort_*() which caused non-optimal ordering when multiple
...
active partitions were on a single spindle. Add a b_rawblkno member to
struct buf which contains the non-partition-relative block number to sort
by.
2000-02-07 20:16:47 +00:00
b19c0fbb0a
Make kernel SOMAXCONN patchable. Will add sysctl once we
...
decide on namespace.
2000-02-07 18:43:26 +00:00
cb18849e48
Make APM use a kernel thread rather than a callout, and provide a
...
mutex between the thread and a user process attempting to do APM
operations.
2000-02-07 17:36:59 +00:00
cf532aa7eb
Move CFLAGS and CPPFLAGS to {bootxx,ofwboot}/Makefile to compile installboot
...
without -D_STANDALONE.
2000-02-07 16:26:59 +00:00
6328fac75d
Add bootm_init() prototype.
2000-02-07 14:36:42 +00:00
aa4732525f
Fix from Darren Reed for the test failure of f11.
2000-02-07 13:58:00 +00:00
de608f33e1
Don't use PROM the virtual address (if any) for the device registers;
...
they are not reliably mapped. Also, unmap registers if the device
cannot be configured properly.
2000-02-07 11:44:15 +00:00
a534cd4254
Correct John Markus Bjørndalen's horribly mangled name in a comment.
2000-02-07 09:40:37 +00:00
a8365d0e29
Use pcmcia_devinfo().
2000-02-07 09:36:27 +00:00
e2ab50484b
Add a pcmcia_devinfo() function (akin to pci_devinfo). It generates a
...
string suitable for printing in the attach message.
2000-02-07 09:35:29 +00:00
2687887f38
s/DIAGNOSTIC/DEBUG/
2000-02-07 06:15:16 +00:00
85cdd5f08e
remove IPv6 router renumbering prefix information in the kernel
...
when all the interface addresses are gone.
this should remove dangling structure when:
# ifconfig lo0 inet6 3ffe::1 prefixlen 64 alias
# ifconfig lo0 inet6 3ffe::1 -alias
is performed.
2000-02-07 05:48:11 +00:00
1148e4715f
correct SIOCAIFADDR_IN6 failure recovery in point-to-point case.
2000-02-07 05:42:59 +00:00
49bed394bd
add more sanity check against mbuf length.
...
use log() for DAD related kernel message.
2000-02-07 05:42:28 +00:00
45b89333e4
close comment.
...
From: Kazuto Ushioda <x-y-z@3si.co.jp>
2000-02-07 03:51:59 +00:00
e9a4467c58
Fix thinko in previous revision: it wouldn't catch deassert.
...
Revert the code inside the new test to the previous-but-one revision.
2000-02-07 02:17:18 +00:00
2da22cf2c5
Check for DCD status change interrupts which signal PPS events, even
...
if the line discipline is ignoring carrier (e.g., via comparam()'s
setting of sc->sc_msr_mask). Move PPS timestamp outside the normal
status-change processing, and ignore sc_msr_mask when testing
for PPS events.
2000-02-06 23:23:37 +00:00
93be165768
Remove an "#if 0" I seemed to have missed, to include wd* devices in the
...
search for root filesystems.
2000-02-06 21:45:03 +00:00
96250cd570
fix the calculation bug for the LMA of bss.
2000-02-06 16:53:57 +00:00
8636e8eef7
Update for compat_netbsd32.
2000-02-06 16:49:51 +00:00
70694ad4bb
Add new P_32 flag for processes running 32-bit emulation.
2000-02-06 16:47:57 +00:00
cde9dba8ab
Add support for -current's ELF32 exec format.
2000-02-06 16:45:56 +00:00
72ecabeb4d
In if_detach(), call PRU_PURGEIF for *every* protocol within a domain
...
that has a usrreq entry point. Each protocol may have its own PCB
tables that need to be purged of references to the interface.
2000-02-06 16:43:33 +00:00
06aa6ffcb9
Delete dupicated 'z50'.
2000-02-06 14:02:42 +00:00
986d236119
remove COMPAT_NOMID stuff
2000-02-06 13:13:20 +00:00
90736ab608
fix include pathname for better rfc2292 compliance.
2000-02-06 12:49:37 +00:00
23774a37c9
remove unused variable *dp.
2000-02-06 11:14:56 +00:00
51219dabc9
to be more rfc2292 complient, move ip6.h and icmp6.h into netinet.
...
(netinet6/{ip6,icmp6}.h is non-standard path - these files should go away)
it was not possible to use cvsmove in this case.
when you try to look at history, chase it toward netinet6/{ip6,icmp6}.h.
2000-02-06 11:11:29 +00:00
1a8f3a2b75
Add platid_name() which retrieves the platform name.
2000-02-06 08:47:03 +00:00
dbeafc9dbe
clean up some printfs
2000-02-06 08:14:13 +00:00
76064f5770
don't chase mbuf pointer when it is NULL.
2000-02-06 08:06:43 +00:00
c75556a12f
Add kernel logging of processes which exit on signals which can
...
cause a core to drop, and whether the core dropped, or, if it did
not, why not (i.e. error number). Logs process ID, name, signal that
hit it, and whether the core dump was successful.
logging only happens if kern_logsigexit is non-zero, and it can be
changed by the new sysctl(3) value KERN_LOGSIGEXIT. The name of this
sysctl and its function are taken from FreeBSD, at the suggestion
of Greg Woods in PR 6224. Default behavior is zero for a normal
kernel, and one for a kernel compiled with DIAGNOSTIC.
2000-02-06 07:29:56 +00:00
a4746f91c3
choose first keymap that matches.
...
Otherwise, the NEC MobilePro 770 chooses the wrong one.
This is consistent with keymap searching order from before revision 1.12,
although I haven't investigated why choosing the last match instead of the first
causes the MobilePro 770 to lose
2000-02-06 06:29:22 +00:00
17c346b9e1
Changed cacheable -> prefetchable. [sync w/ swiz]
2000-02-06 04:07:18 +00:00
28bdaf37d9
Changed cacheable -> prefetchable.
2000-02-06 03:52:27 +00:00
113a379cba
Implement pffinddomain(), and use it as appropriate.
2000-02-06 02:54:15 +00:00
97eba73a40
If we have a Pyxis with the DMA page crossing bug, don't allow coalescing
...
of adjacent DMA segments.
XXX This is still not perfect... but making it perfect will probably
require additions to the bus_dma interface and the ISA autoconfiguration
interface.
2000-02-06 01:26:50 +00:00
0c4f8a876b
Implement an internal DMA map flag which prevents coalescing of
...
adjacent DMA segments.
2000-02-06 01:23:30 +00:00
5b4e17169b
Bring in the support to boot from ide drives. This is from dec_eb164.c.
...
This is needed for newer firmware and to boot from slave drives.
2000-02-05 22:22:41 +00:00
541c31000e
Sync the ide support with dec_eb164.c rev 1.32:
...
Add the support to boot an ide slave drive and to boot from the secondary
ide channel.
Michael Hitch gave me the final hint how to do that and Havard Eidnes
tested it with his slave drive.
This should fix pr#8808 on the DS10.
Also remove one ideboot check which wasn't removed when I removed it from
dec_eb164.c.
2000-02-05 22:19:19 +00:00
b92d490f3e
Add the support to boot an ide slave drive and to boot from the secondary
...
ide channel.
Michael Hitch gave me the final hint how to do that and Havard Eidnes
tested it with his slave drive.
This will also fix pr#8808 on the DS10 when I commit the changes to
dec_6600.c.
2000-02-05 22:14:42 +00:00
be5d89da1a
Add definition for default swap partition (libahdi uses this).
2000-02-05 21:14:55 +00:00
958e687d69
LP64 printf fixes.
2000-02-05 20:02:42 +00:00
d9b42dd1fc
At long last, the MI wdc glue for the Amiga. Tested on my A4000, but not
...
on an A1200 yet. Configuration of wdc/atapi in GENERIC is currently
commented out to prevent the suprise of an IDE drive changing from sd0
to wd0 (and the first real SCSI drive changing from sd1/sd1 to sd0).
2000-02-05 18:46:28 +00:00
db4859bcd8
Regen (with commented MI wdc stuff)
2000-02-05 18:42:49 +00:00
6d8c9583a7
indent this file
2000-02-05 18:42:37 +00:00
915731c9ea
Add commented out configuration for MI wdc.
...
Note: enabling these will cause disk device renumbering if any IDE were
present (i.e. if sd0 was IDE drive 0, that drive will become wd0 and sd0
will be the first real SCSI drive.
2000-02-05 18:41:58 +00:00
101848d272
run this through indent with some comment cleanup -- more knfing needed.
2000-02-05 18:20:08 +00:00
494c9affea
Support detach.
2000-02-05 18:11:55 +00:00
9e9f3e15e4
need PRC_IF{UP,CHANGE}.
2000-02-05 18:11:41 +00:00
7604e315fb
sync with reality.
...
- getipnodeby{name,addr} is now non-issue as RFC2553bis will be dropping it
- if_detach is mostly done
- add some items
2000-02-05 18:05:33 +00:00
8759daabe7
Sync.
2000-02-05 14:35:41 +00:00
36e6bc645e
Improve namespace test macros a bit.
2000-02-05 14:04:36 +00:00
b527153dd7
Ensure uniqueness of EEPROM device without reference to cf_unit.
2000-02-05 12:32:57 +00:00
1f8497dc18
fix route cleanup on interface removal. (not sure why -Wall did not catch it)
2000-02-05 07:58:54 +00:00
b4f060a0bc
Mark LFS partitions as "BSD lfs ".
...
Now, swap partition should be "BSD swap" unless COMPAT_14.
2000-02-05 07:38:10 +00:00
645c869160
Add detach support for ethernet portion.
2000-02-05 04:44:00 +00:00
9267b8f018
Remove unnecessary includes.
2000-02-05 04:41:49 +00:00
abac10f360
Yet anothor workaround for hpcmips. I guess real problem is somewhere else...
...
With rev.1.37, my MobileGearII for DoCoMo finds both ne0 and wd0
even if pcic_delay_sleep is 1.
With rev 1.40, it fails to find wd0.
2000-02-05 04:34:36 +00:00
be8a1b19f0
more CR/NL -> NL conversion (some crept in)
2000-02-05 03:25:26 +00:00
7d16ac338c
add __BROKEN_CONFIG_UNIT_USAGE #define, becuase these ports do very
...
wrong things with device configuration data "cf_unit" information.
2000-02-05 00:13:22 +00:00
253b179629
clean up (group, sort) __HAVE_* defines
2000-02-05 00:07:30 +00:00
c343256107
Make the new findroot code work on PowerMac 9600 (OF-1.0.5).
2000-02-04 18:29:15 +00:00
2a46aa5d9a
Fix "unused variable" warning when FAILSAFE option is defined
2000-02-04 16:23:14 +00:00
b4edda97d5
Fix a compilation bug due to a missing parenthesys
2000-02-04 15:43:46 +00:00
f91ee608a9
avoid calling in6_control(SIOCDIFADDR_IN6) from interrupt context.
...
it is not supposed to work.
logging fix: add "\n" to some of log() in in6_prefix.c.
improve in6_ifdetach(). now almost all structure depend on ifnet
will be cleared up.
possible loose ends:
- cached route_in6 in static varaiables needs to be cleared as well
- there are ifaddr manipulation without reference counting,
which should be fixed
we still see panics after card removal, though... not sure what is left.
(sync with kame)
2000-02-04 14:34:22 +00:00
a7ec5e9634
Add Cyrix MediaGX(m) identification.
...
Thanks to INOUE Yoshinari <pf5y-inue@asahi-net.or.jp>.
2000-02-04 14:21:33 +00:00
e037c568cb
Update for cardbus unmap changes.
2000-02-04 13:48:23 +00:00
1facb42e6e
Make the driver work even if DIAGNOSTIC is not set.
2000-02-04 13:43:56 +00:00
29be498635
Add a list of all the currently supported boards
2000-02-04 13:16:22 +00:00
9c688fd57c
s/SYSTEM/SYSMEM/; so that this file compiles again.
2000-02-04 11:04:46 +00:00
8006211b18
fix previous broken commit of the 8-bit memory handling (spotted
...
by Christian Hopps); this will enable 16-bit memory accesses for devices
that can handle it
2000-02-04 10:18:28 +00:00
0f09f8dd2b
cope with card insertion/removal during suspend-resume session.
...
(removal/ insertion after suspend and before resume)
How should we deal with card swaps?
2000-02-04 09:45:34 +00:00
730f15bb19
Free resources on attach failure.
2000-02-04 09:31:07 +00:00
82235a8673
Actually, no need to keep track of sc_ih.
2000-02-04 09:30:28 +00:00
10509171fb
avoid some of typecasting from in6_ifaddr to ifaddr.
2000-02-04 08:54:04 +00:00
2a1352a5b3
enable the card before establishing the interrupt to avoid being called
...
with stray interrupts before we are ready.
clear the card interrupt after enabling the card
2000-02-04 08:45:41 +00:00
70e711cd60
only enable interrupts from the controller if the socket is enabled
2000-02-04 08:42:47 +00:00
d344dd94ab
keep track of the enabled state of a socket
2000-02-04 08:42:07 +00:00
ded26ac3e4
Now cardbus_mapreg_unmap() has been implemented in
...
sys/dev/cardbus/cardbus_map.c. The detech function in
sys/dev/cardbus/if_tlp_cardbus.c uses cardbus_mapreg_unmap().
2000-02-04 07:59:20 +00:00
59db45db2a
bring over WEP mode from FreeBSD/OpenBSD
2000-02-04 07:48:29 +00:00
6bfa70b9c6
Remove an unused variable.
2000-02-04 07:48:11 +00:00
4a5667f967
undo part of the previous commit. I'll just steal the code from freebsd,
...
to minimize differences between the drivers.
2000-02-04 06:22:52 +00:00
9ff702157c
doh, remove debugging leftover (forcing irq 15 to always be avail).
2000-02-04 05:30:55 +00:00
af9710cf6e
Disestablish an interrupt if failed to enable the card.
2000-02-04 04:54:51 +00:00
ed0f41807d
- Call if_deactivate instead of smc91cxx_disable when deactivating.
...
- Fix typo in comment.
2000-02-04 04:05:50 +00:00
a09eb087b6
Treat "chaos" like a bandit.
2000-02-04 03:40:42 +00:00
6f28840935
Remove no longer necessary old code.
2000-02-04 03:40:00 +00:00
3ff6804bdd
Release the resource on attach failure.
2000-02-04 03:38:06 +00:00
de4f36ae63
Add encryption structure definitions -- it's interesting tht the gold card
...
has 128 bit encryption, but the key space is 14 * 8 bits, or 112 bits...
I wonder where the other 16 bits comes from?
2000-02-04 02:03:02 +00:00
942a54e0c1
replace the *_lookup table entry match/lookup functions in all of
...
these drivers with a single common function (which supports tables
of variable-sized structures). Things are mostly as they were before:
tables are terminated by entry with NULL name, etc. There's also
the ability to call a driver-specific match function which can be used
to augment the table lookup.
2000-02-04 01:27:12 +00:00
dd84ecc7ac
Implement ratecheck(), a function which can help programmers implement
...
rate-limited actions. See ratecheck(9) for details of its use.
2000-02-03 23:04:45 +00:00
0bff6e573a
Cosmetic change; use IRQUNK instead of -1 always.
2000-02-03 23:03:11 +00:00
dff236064f
collect all of the forward struct definitions in one place, and then
...
sort -u them. (there were duplicates, some even duplicating those at the
top of the file!)
2000-02-03 22:44:11 +00:00
71d64756c2
wrap optimized copy routines in an ifdef
2000-02-03 21:27:35 +00:00
834e04377c
Remove ADW_*_DISABLE options. Now they are described in the adw.4 man page
2000-02-03 20:31:42 +00:00
cbacaf54d7
Add AdvanSys U2W (LVD) boards support
2000-02-03 20:28:26 +00:00
ccba141601
add notice on site-locals. typo fix. (sync with kame)
2000-02-03 19:57:13 +00:00
f458367b3f
cosmetics: remove double semicolon, whitespace
2000-02-03 19:53:03 +00:00
11ee920b54
rename printf.c to winprintf.c, nuke inclusion of libsa's printf.c
...
in winprintf.c, and directly include libsa's printf.c in the project.
2000-02-03 19:46:21 +00:00
dd74df567d
no more need for one-liners to include libsa .c files. just name them
...
directly in the project file.
2000-02-03 19:32:37 +00:00
af14db5a91
- if_detach
...
- xx_control calls from interrupt thread should be removed
- LP64
2000-02-03 19:29:20 +00:00
ed17755cec
clean up lists: get rid of bogus extra spaces, backslash -> slash
...
(vc doesn't care, in paths of source files), sort, etc.
2000-02-03 19:27:56 +00:00
e29a886cd6
* Split bandit and grackle.
...
* Add UniNorth support.
Now pcibus is attached like:
bandit0 at mainbus0
pci0 at bandit0 bus 0
...
2000-02-03 19:27:43 +00:00
ff6ae74e98
tolerate newlines in the list variables, and clean up the config files
...
to match. no more ridiculously long lines, now!
2000-02-03 19:16:47 +00:00
b89812ff7f
- Don't reuse ip6 header portion as reassembly pointer, to be friendly
...
with LP64 arch. (not tested on LP64, sorry)
- add comment on reass rule
- some other cleanups
NetBSD PR: 9340
From: iwamoto@sat.t.u-tokyo.ac.jp
(in sync with kame)
2000-02-03 18:13:01 +00:00
fd2fd888ef
Add AdvanSys U2W host adapters
2000-02-03 16:56:23 +00:00
787999d9e4
Add AdvanSys U2W boards
2000-02-03 16:51:42 +00:00
579e538de0
fix promisc mode for smc91cxx again.
2000-02-03 16:20:49 +00:00
82464e46d6
Add a C99-style va_copy macro.
2000-02-03 16:16:06 +00:00
5b67628108
regen
2000-02-03 13:58:55 +00:00
1533d39d9e
2 Micro -> O2 Micro
2000-02-03 13:58:28 +00:00
03993c84d3
use u_int16_t, not u_short, for port #.
2000-02-03 13:17:39 +00:00
54cb3be873
remove #if 0'ed code
2000-02-03 12:50:05 +00:00
8fdf90f0ff
remove old #if 0'ed portion
2000-02-03 12:49:15 +00:00
323f8904e5
s/splnet/splsoftnet/
2000-02-03 12:13:50 +00:00
052fdc75bc
regen
2000-02-03 10:22:34 +00:00
89c5ba9f00
Add Linux fsuid system calls - from Witold J. Wnuk in PR kern/9335
2000-02-03 10:02:59 +00:00
7e89ba1946
Remove duplicated PF_INET6 definition.
2000-02-03 09:23:03 +00:00
1102c5ed1d
Remove temporary workaround for hpcmips. Now it works without it.
2000-02-03 09:00:39 +00:00
d6554f3e25
Cosmetic changes; remove unnecessary semi-colon.
2000-02-03 08:59:20 +00:00
d6df5ce334
Make the product lookup table driven.
2000-02-03 08:52:21 +00:00
f1ce315cc0
Regen.
2000-02-03 08:26:33 +00:00
fc92de5f92
Add an entry for Icom WAVEMASTER SL-200.
2000-02-03 08:25:55 +00:00
c6641d91a8
Merge IOASIC register definitions.
2000-02-03 08:13:44 +00:00
44a20a6c96
If we read a bad header signature, report what we read.
2000-02-03 06:47:31 +00:00
5802ccb9c9
In ahc_intr(), if initialization failed, don't try to service the
...
interrupt.
2000-02-03 06:25:09 +00:00
a084fd2f81
Some PHYs go off into left field for a few seconds if you attempt to kick
...
autonegotiation while it's already enabled.
2000-02-03 06:11:13 +00:00
68a7084f0c
attempt to make this more like the std indicates
2000-02-03 06:07:06 +00:00
20522c36ed
Detach MII if there is.
2000-02-03 06:03:39 +00:00
9ff57fe506
Oops, missing return;
2000-02-03 05:38:57 +00:00
f3837e8a9d
Not to use (cfdata->cf_unit > 0) conditional in device match() routine.
2000-02-03 05:22:47 +00:00
8e27abd255
Use bus_space_{write,read} for IOASIC register access.
2000-02-03 05:16:30 +00:00
d60c22d5f7
Nuke mistakenly introduced #include "rasterconsole.h".
2000-02-03 04:23:36 +00:00
72b67dec3e
Massive change of console initialization to make WSCONS transition easier.
2000-02-03 04:19:59 +00:00
3aaeaf7331
- Massive change of console initialization. Have each model its own
...
consinit().
- Fix fbconnect() and relatives; 'struct fbinfo' is initialized only once,
making sure no extraneous console resolution message is emitted.
2000-02-03 04:09:01 +00:00
8d0ed726af
nuke inclusion of compat.h
2000-02-03 03:21:52 +00:00
00e405865e
nuke inclusion of compat.h, fix typo in comment about #ifdef
2000-02-03 03:21:23 +00:00
239dc2e799
add __STDC__ to CPP define list
2000-02-03 03:20:33 +00:00
c84d83a616
nuke inclusion of compat.h
2000-02-03 03:20:03 +00:00
19c2a289e7
add bzero.c to file list, add __STDC__ to CPP define list
2000-02-03 03:19:11 +00:00
ce844666c1
stub to pull in libsa bzero.c
2000-02-03 03:18:28 +00:00
3772a52ffc
just use __int64 and unsigned __int64 rather than *INT64TYPE
2000-02-03 03:17:23 +00:00
63a0836e51
instead of just going on as normal if __RENAME() is used in kernel
...
(_KERNEL) or standalone (_STANDALONE) files, replace it with some
text that'll cause an error. __RENAME() should never be used in
the kernel (there's no need, at least, with the current way of doing
things), and is downright annoying in standalone code. (In a standalone
build environment, there may be no sane way to do symbol renaming,
which means that even just faking it and defining it to emptyness
would cause problems if it were actually needed.)
2000-02-03 02:20:13 +00:00
fefea44b6f
tread _STANDALONE like _KERNEL: don't rename bswapNN functions
2000-02-03 02:03:12 +00:00
e7b7c3eb15
don't provide these prototypes for standalone programs (as noted by
...
_STANDALONE):
* most of them are absolutely irrelevant, and not provided in a standalone
environment!
* those which are relevant and provided (stat() and fstat()) shouldn't be
__RENAME()d in the standalone environment.
2000-02-03 02:01:53 +00:00
fbf9177d1b
provide stat() and fstat() here for standalone programs' use
2000-02-03 02:00:31 +00:00
22fe15d7b4
Let mii_phy_setmedia() handle the IFM_AUTO case, too.
2000-02-02 23:34:56 +00:00
c1185c1020
PRU_PURGEADDR -> PRU_PURGEIF, per a discussion w/ itojun. In the IPv4
...
and IPv6 code, also use this to traverse PCB tables, looking for cached
routes referencing the dying ifnet, forcing them to be refreshed.
2000-02-02 23:28:08 +00:00
eff80a379b
Due to popular demand (hi Bernd), comment out the CardBus entries.
...
Appearently it doesn't work for some chipsets. I think the right way
to fix this would be to only let cbb attach to the working chipsets...
2000-02-02 20:39:35 +00:00
9e8d441535
Add CardBus support. If it breaks anything, I'm sure we'll know soon. :)
2000-02-02 20:17:13 +00:00
de5a3532be
Fiddle with some PHY bits on the D-Link adapter as well. From FreeBSD.
2000-02-02 20:06:55 +00:00
4369c3338a
Change the size of the PCMCIA controller memory window to 64K. Several
...
of the radio LAN cards need it.
2000-02-02 19:48:18 +00:00
a5dc628e12
manipulate packet counters, support detach, and add commented out code to
...
DTRT on suspend
2000-02-02 18:39:44 +00:00
99f19b7139
Wrap a debugging printf in IFAREF_DEBUG.
2000-02-02 18:02:08 +00:00
8a6ced5516
make sure to nuke kludge entries, regardless from refcnt.
2000-02-02 17:54:07 +00:00
8923ca0b00
Make PHY drivers provide a pointer to their status routine, and add
...
a generic mii_phy_status() that calls back into the PHY. It doesn't
do anything interesting yet, but it will soon.
2000-02-02 17:50:43 +00:00
94b1e4084a
Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
...
flags down from the parent to child vi mii_attach().
2000-02-02 17:46:42 +00:00
eed75dbc26
Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
...
flags down from the parent to child vi mii_attach().
2000-02-02 17:09:38 +00:00
f5fba17f1b
implement in6_purgemkludge(). in6_ifdetach() calls it to avoid dangling
...
kludge entries. the situation would occur if you take the following steps:
- join multicast groups (default ones like linklocal all-node is fine)
- remove all IPv6 addresses manually
- remove pcmcia card
to thorpej: pls call in6_ifdetach() when PRU_PURGEIF is raised (just before
removing ifnet). it should do the right thing (unable to perform real test
though)
2000-02-02 16:58:10 +00:00
9cf3b29a57
Make the device_register code work on machines with multiple PCI bridges
...
with the same bus number (like the new G4s). Also, don't hardcode the
size of the pci_bridges array.
2000-02-02 16:41:56 +00:00
b2cac6e684
if_detach for sm/pcmcia.
...
with addition of resource allocation flags in softc (to DTRT on detach).
2000-02-02 16:04:40 +00:00
93d494f9a5
Take care of National Geode (Cyrix MediaGX) built-in clock module bug.
...
Patch supplied by INOUE Yoshinari <pf5y-inue@asahi-net.or.jp>, kern/8654.
2000-02-02 15:26:27 +00:00
586595e6d4
Make irq probing controled by patchable variable and disable on hpcmips
...
by default. It doesn't work on hpcmips.
2000-02-02 14:44:09 +00:00
f7096eef97
Fix typo; not PCIC_DEBUG but PCICDEBUG.
2000-02-02 14:23:48 +00:00
6f13dac00f
remove route to link-local allnodes multicast address (ff02 ❌ :/32),
...
when the last IPv6 address on an interface is get removed.
in6_ifattach() configures it and in6_ifdetach() removes it.
XXX last part of in6_purgeaddr looks very ugly, but there's no event for
"interface detach" (events are for "address detach").
2000-02-02 13:44:05 +00:00
cee0dfa2d5
Add rnd_source.
2000-02-02 13:22:07 +00:00
c9d8358135
Generate usb events on attach and detach.
...
Clean up detach a little.
2000-02-02 13:21:25 +00:00
3a1229e779
Generate usb events on attach and detach.
2000-02-02 13:20:59 +00:00
aae9ac7e11
Generate usb events on attach and detach.
...
Handle rnd stuff correctly.
2000-02-02 13:19:44 +00:00
4b93911b25
Generate usb events on attach and detach.
2000-02-02 13:18:45 +00:00
7a7a3bcfdf
handle attach failure in ne/pcmcia more carefully. (otherwise we'll
...
have trouble on detach)
2000-02-02 13:06:15 +00:00
7aa608e563
handle attach failure in more detail. make sure to
...
pcmcia_function_disable() on failure.
2000-02-02 13:02:56 +00:00
4e1b4b724b
implement cnw_detach.
...
XXX it looks that whenever there's error-return in xx_attach,
we need to have some check in xx_detach(). otherwise, routines such as
ether_ifdetach() will be called without call to ether_ifattach().
2000-02-02 12:25:13 +00:00
b10d6a6fc0
Support detach.
2000-02-02 11:42:29 +00:00
f4e8883ccd
use a bit more standard (sys/device.h) prototype for {dp8390,ne2000}_detach().
2000-02-02 11:41:56 +00:00
2b4766a6b2
enami's fix to dp8390 did the trick, it does not hang up any more.
...
enable detach routine by default.
2000-02-02 11:17:32 +00:00
a5f7a2c791
Detach rnd source in ep_detach(). Check for DVF_ACTIVE in epintr();
2000-02-02 11:00:48 +00:00
60e57afedd
- Check also DVF_ACTIVE bit in dp8390_intr.
...
- Delete ifmedia instances on detach.
2000-02-02 10:50:56 +00:00
a54d060a1c
Unhook the entropy source on detach.
2000-02-02 10:45:12 +00:00
500a12d2e5
- No need to wait in pcic_chip_socket_disable. It was intended to keep
...
some period between disable and enable in spec, but is done in
pcic_chip_socket_disable. And we also disable socket in pcic_deactivate_card,
we should do it in another way if it is really necessary.
- Shorten the wait message so that ps(1) and ps in ddb be happy.
- Replace newly added long delay with sleep.
2000-02-02 10:31:45 +00:00
e16a469c8f
Cosmetic changes.
2000-02-02 10:19:51 +00:00
17f5887294
implement if_detach code for ne/pcmcia.
...
XXX still incomplete, ne_pcmcia_detach() commented out for safery - please test
2000-02-02 10:00:06 +00:00
a909d816d2
Add detach support.
2000-02-02 09:34:51 +00:00
9cb8699ba1
Revoke bpf device on detach.
2000-02-02 09:03:41 +00:00
e4c766e299
Make sure to untimeout() things on detach.
2000-02-02 08:57:51 +00:00
82559ba682
Move detach operations around a little to simplify (and perhaps get it
...
right?). Prompted by Jason, itojun and myself.
2000-02-02 08:41:00 +00:00
983b6de129
Since we are allowed to wait, no need to check the return value.
2000-02-02 08:36:02 +00:00
2af8db77c9
Grumble, forward decl for struct ifaddr.
2000-02-02 08:14:20 +00:00
f781f298a6
remove ns_purgeaddr() prototype - it's in netns/ns_var.h (added by thorpej)
2000-02-02 08:09:57 +00:00
4a6ae7bdfc
Get rid of shutdown hook and attached media on detach.
2000-02-02 08:08:50 +00:00
b2408b62bf
Add missing prototype for ns_purgeaddr().
2000-02-02 08:06:49 +00:00
84dc99fdea
Bring some order to the chaos which was the MII code function naming
...
"conventions".
2000-02-02 08:05:26 +00:00
ea45df4d30
Make sure to get rid of shutdown hook and ttach media on detach.
2000-02-02 08:00:21 +00:00
af1d56129f
wrap bpfdetach() with NBPFILTER > 0.
2000-02-02 07:47:33 +00:00
thorpej