maxfilesize set the maximum size of uploaded files
sanenames if set, only permit uploaded filenames that contain
characters from the set "-+,._A-Za-z0-9" and that
don't start with `.'
- new/changed command line options:
-e emailaddr define email address for %E (see below)
-P dataport use dataport as the dataport (instead of ctrlport-1)
-q use pid files to count users [default]
-Q don't use pid files to count users
-u write entries to utmp
-U don't write entries to utmp [default]
-w write entries to wtmp [default]
-W don't write entries to wtmp
NOTE: -U used to mean `write utmp entries'. Its meaning has changed
so that it's orthogonal with -q/-Q and -w/-W. This isn't
considered a major problem, because using -U isn't going to
enable something you don't want, but will disable something
you did want (which is safer).
- new display file escape sequences:
%E email address
%s literal `s' if the previous %M or %N wasn't ``1''.
%S literal `S' if the previous %M or %N wasn't ``1''.
- expand the description of building ~ftp/incoming to cover the
appropriate ftpd.conf(5) directives (which are defaults, but it pays
to explicitly explain them)
- replace strsuftoi() with strsuftoll(), which returns a long long if
supported, otherwise a long
- rework the way that check_modify and check_upload are done in the yacc
parser; they're merged into a common check_write() function which is
called explicitly
- merge all ftpclass `flag variables' into a single bitfield-based flag element
- move various common bits of parse_conf() into a couple of macros
- clean up some comments
* replace union sockunion {} with struct sockinet {}, and modify the code
accordingly. this is possibly more portable, as it doesn't rely upon
the structure alignment within the union for our own stuff. uses local
su_len unless HAVE_SOCKADDR_SA_LEN is defined (set ifdef BSD4_4)
(XXX: haven't tested the ipv6 stuff)
* always use getaddrinfo() and getnameinfo() instead of maintaining two code
paths. (lukemftpd will provide replacements for these on older systems)
* use lockf() instead of open(.., O_EXLOCK) to lock the pid file
* minor KNF
* clean up long long support: create helper #defines and use as appropriate:
#define NO_LONG_LONG ! NO_LONG_LONG
------- ------------ --------------
LLF "%ld" "%lld"
LLFP(x) "%" x "ld" "%" x "lld"
LLT long long long
ULLF "%lu" "%llu"
ULLFP(x) "%" x "lu" "%" x "llu"
ULLT unsigned long unsigned long long
STRTOLL(x,y,z) strtol(x,y,z) strtoll(x,y,z)
Let lfs_cleanerd record its pid in /var/run like other daemons. Make
mount_lfs not start another cleaner when updating the mount, unless it is
being upgraded from read-only to read-write; when downgrading to read-only,
kill the cleaner using the recorded pids.
return 522 on unknown protocol identifier on EPRT.
- clarify EPSV/EPRT/LPSV/LPRT behavior.
- repair memory leak and lack of boundary check on EPRT.
- make sure we do not resolve DNS on EPRT.
sync with kame.
instead, if the segment doesn't have many live blocks, copy them to a
more appropriately sized chunk of memory and release the original.
This should prevent the cleaner from distending itself when cleaning many
segments with only one or two live blocks each, as when using the "-b" option.
- keep the case consistent between the actual name and what's referenced.
e.g, if it's `foo', don't use '.Nm Foo' at the start of a sentence.
- remove unnecessary `.Nm foo' after the first occurrence (except for
using `.Nm ""' if there's stuff following, or for the 2nd and so on
occurrences in a SYNOPSIS
- use Sx, Ic, Li, Em, Sq, and Xr as appropriate
This ftpd now compiles and runs on NetBSD/1.4.2 with:
CPPFLAGS+= \
'-Dstrlcpy(a,b,c)=(strncpy(a,b,c),strlen(a))' \
'-Dstrlcat=strncat' \
'-Dsl_add(a,b)=(sl_add(a,b),0)'
who are ELF now. Needed because cross-building them is still a
problem. These loaders will try /emul/aout first, but do not
have the baggage that COMPAT_AOUT has.
Kernel:
* Add runtime quantity lfs_ravail, the number of disk-blocks reserved
for writing. Writes to the filesystem first reserve a maximum amount
of blocks before their write is allowed to proceed; after the blocks
are allocated the reserved total is reduced by a corresponding amount.
If the lfs_reserve function cannot immediately reserve the requested
number of blocks, the inode is unlocked, and the thread sleeps until
the cleaner has made enough space available for the blocks to be
reserved. In this way large files can be written to the filesystem
(or, smaller files can be written to a nearly-full but thoroughly
clean filesystem) and the cleaner can still function properly.
* Remove explicit switching on dlfs_minfreeseg from the kernel code; it
is now merely a fs-creation parameter used to compute dlfs_avail and
dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its
former role is better assumed by a properly computed dlfs_avail.
* Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv.
This prevents a panic, but, if the cleaner is feeding the filesystem
the wrong data, you are still in a world of hurt.
* Cleanup: remove explicit references of DEV_BSIZE in favor of
btodb()/dbtob().
lfs_cleanerd:
* Make -n mean "send N segments' blocks through a single call to
lfs_markv". Previously it had meant "clean N segments though N calls
to lfs_markv, before looking again to see if more need to be cleaned".
The new behavior gives better packing of direct data on disk with as
little metadata as possible, largely alleviating the problem that the
cleaner can consume more disk through inefficient use of metadata than
it frees by moving dirty data away from clean "holes" to produce
entirely clean segments.
* Make -b mean "read as many segments as necessary to write N segments
of dirty data back to disk", rather than its former meaning of "read
as many segments as necessary to free N segments worth of space". The
new meaning, combined with the new -n behavior described above,
further aids in cleaning storage efficiency as entire segments can be
written at once, using as few blocks as possible for segment summaries
and inode blocks.
* Make the cleaner take note of segments which could not be cleaned due
to error, and not attempt to clean them until they are entirely free
of dirty blocks. This prevents the case in which a cleanerd running
with -n 1 and without -b (formerly the default) would spin trying
repeatedly to clean a corrupt segment, while the remaining space
filled and deadlocked the filesystem.
* Update the lfs_cleanerd manual page to describe all the options,
including the changes mentioned here (in particular, the -b and -n
flags were previously undocumented).
fsck_lfs:
* Check, and optionally fix, lfs_avail (to an exact figure) and
lfs_bfree (within a margin of error) in pass 5.
newfs_lfs:
* Reduce the default dlfs_minfreeseg to 1/20 of the total segments.
* Add a warning if the sgs disklabel field is 16 (the default for FFS'
cpg, but not usually desirable for LFS' sgs: 5--8 is a better range).
* Change the calculation of lfs_avail and lfs_bfree, corresponding to
the kernel changes mentioned above.
mount_lfs:
* Add -N and -b options to pass corresponding -n and -b options to
lfs_cleanerd.
* Default to calling lfs_cleanerd with "-b -n 4".
[All of these changes were largely tested in the 1.5 branch, with the
idea that they (along with previous un-pulled-up work) could be applied
to the branch while it was still in ALPHA2; however my test system has
experienced corruption on another filesystem (/dev/console has gone
missing :^), and, while I believe this unrelated to the LFS changes, I
cannot with good conscience request that the changes be pulled up.]
christos