Commit Graph

30028 Commits

Author SHA1 Message Date
thorpej 1f4085fb66 Fix spruious false matches in px_match(). 1999-05-06 01:50:56 +00:00
thorpej 964b69ec84 Back out previous. Thanks to cgd for pointing out another way to do this. 1999-05-06 01:10:28 +00:00
wrstuden af849de633 MAke this cross-tools happy. 1999-05-06 01:04:48 +00:00
thorpej 2a4490daa5 Add a `bus' member to the pci_attach_args. This is not normally used,
but some child drivers might need to know this information.
1999-05-06 01:01:19 +00:00
thorpej bb619306e2 Add needs-flag to the ukbd device. 1999-05-06 00:42:16 +00:00
thorpej 39544d33b7 Add needs-flag to the uhci and ohci controller attributes. 1999-05-05 23:57:31 +00:00
mycroft e6548e54bd Enable interrupts *after* reading the fault address and status. This is
necessary because some interrupt handlers may cause additional faults (e.g.
through R/M emulation) and thereby trash the previous fault state.
From Richard Earnshaw.
1999-05-05 22:06:15 +00:00
perry f8e8703b5e Add patch from Manuel Bouyer -- his mail message said:
By code inspection I found 2 bugs in the ATAPI code, one may be the cause
of your problem: A counter is not reset when issuing the request_sense
command. This is c_skip, the counter used to track the offset in the data
buffer when a data tranfer needs multiple phases. The effect of this is that
the sense data transfered may be stored outside the sense buffer (sense buffer
+ some, potentially several KB, offset). This can only occur in PIO mode,
DMA is not affected.
This doesn't occur in "normal" use because when reading a data CD, either
the sense is issued for a non-data command (in which case c_skip stays to
0), or an error occured and no data has been transfered, and c_skip is still 0.
I can't see a case where a data READ/WRITE could cause a sense tranfer without
error.

The second problem is that b_resid can be set to a false value (resulting of
the sense tranfer and not the data transfer). Again this is not a problem with
usual data tranfers because both values ends up being 0 when no error occurs.
1999-05-05 21:35:15 +00:00
thorpej 74b3466a83 NetBSD 1.4B. 1999-05-05 20:03:59 +00:00
thorpej e3669c3393 Add "use counting" to file entries. When closing a file, and it's reference
count is 0, wait for use count to drain before finishing the close.

This is necessary in order for multiple processes to safely share file
descriptor tables.
1999-05-05 20:01:01 +00:00
thorpej 65776a5a0c Make dupfdopen() take a proc * instead of a filedesc *. 1999-05-05 19:52:20 +00:00
thorpej 4913e22a19 Fix alignment problem in the garbage-collection code path. 1999-05-05 19:05:43 +00:00
pk 4cb2198a44 Declare `bootinfo' also if !DDB. 1999-05-05 15:32:33 +00:00
bouyer 9893727873 Fix the way we compute the mode to use: for multiword DMA, the used mode was
2 less than the one we could really use, so for multiword DMA mode 0 or 1,
the driver tried to use DMA mode 255 or 254 (0 - 2 with a u_int8_t).
1999-05-05 15:24:59 +00:00
minoura db3bdbe86c Shut up gcc -Wall. 1999-05-05 14:31:16 +00:00
minoura ad762a0b97 Use mvme68k-derived delay routine.
Now that we support various models, the old constant-loop delay routine
may cause problems.
1999-05-05 13:46:20 +00:00
minoura 3fe3e5261b Add missing ia_size argument. 1999-05-05 13:41:44 +00:00
minoura 7cebd447fb Move config_console to ensure that it is always called. 1999-05-05 13:41:19 +00:00
minoura 63a9944d93 mem_exists was called with wrong 2nd argument.
Because of this, >12MB high memory was not detected.
1999-05-05 13:38:51 +00:00
tsubai a5bf1bf4a2 Copy from libc. 1999-05-05 12:36:40 +00:00
tsubai 0e57d44e45 Add missing CPU_MAXID definition. 1999-05-05 11:20:54 +00:00
christos 22de25977b Argh, removed last ELF induced problem. We used to have syscall: in locore.s
and _C_LABEL(syscall) in trap.c. In ELF they are the same. Change the label
in locore.s to be _C_LABEL(_syscall).
While I am there, move the register save and restoral code used in the
*sigcode trampolines into two macros and use them instead of copying 100
lines of assembly each time.
Now everything ELF works.
1999-05-05 10:53:00 +00:00
christos 952f511570 Use -n for ELF. Using -N might work, but produces only one section.
No flags will not work, because it will produce a kernel loaded at 0xf0000000.
This is because the bfd ELF pagesize (in elf32-sparc.c) is 0x10000. Since
we need to load at 0xf0004000, we use -n.
1999-05-05 10:50:02 +00:00
tsubai 6168467392 Add cpu.h. 1999-05-05 10:15:53 +00:00
tsubai 9042054e51 Fix a small bug to make both IO and MEM enable bits in csr are set. 1999-05-05 08:43:53 +00:00
tsubai dc8d07a096 Fix OFW_PCI_PHYS_HI_DEVICEMASK value. 1999-05-05 08:09:34 +00:00
chs 9528f61050 in vmapbuf(), use pmap_enter() instead of poking PTEs directly. 1999-05-05 05:25:32 +00:00
chs 39a7993efb update resident_count and wired_count properly in pmap_kenter_*()
and pmap_kremove().
1999-05-05 05:21:13 +00:00
thorpej fc645b996a - Always config_found() PCI busses, so we know if present PCI busses
aren't configured.
- Grab the bus's memory space tag from the pci_bridge structure for
the bus.
1999-05-05 04:40:00 +00:00
thorpej 654b0fff46 - Completely rewrite how bus space tags for PCI space are set up. Instead
of hard-coding them, decode the "ranges" property of the PCI bus node in
OpenFirmware.
- Do a little cleanup, and share some more code between the Bandit/Chaos
and MPC106.

XXX The bus_space(9) implementation for macppc really needs to be
rewritten.
1999-05-05 04:37:19 +00:00
thorpej c448c97f2b - Add come comments.
- Do a little cleanup.
- Protect the entirety of pci_conf_{read,write}() with splhigh()/splx().
1999-05-05 04:32:28 +00:00
thorpej 341f87673b Add a bus space tag for PCI memory space to the pci_bridge structure. 1999-05-05 04:26:48 +00:00
cgd 3b5a8a7db7 shuffle (sort) 1999-05-05 01:51:31 +00:00
cgd 5e1a5ebf21 clean up sigset_t manipulation macros 1999-05-05 00:57:43 +00:00
cgd ceff265279 shuffle (alphabetize) 1999-05-05 00:48:30 +00:00
thorpej 742e477ae0 Fix msgbuf handling. 1999-05-05 00:03:10 +00:00
thorpej dbe4c0c061 Make this compile again. 1999-05-04 23:55:27 +00:00
thorpej c2c47b0da9 Toss contents, and just pull in <powerpc/pmap.h>. 1999-05-04 23:49:18 +00:00
thorpej da4b05fa8e Pull in <powerpc/reg.h>. 1999-05-04 23:46:32 +00:00
thorpej 69e521f4be Fix void * arithmetic. 1999-05-04 23:30:21 +00:00
is 7807c9a493 Fixes PR 7489 by Olaf Seibert. Fix by Zdenek Salvet (PR 7497). 1999-05-04 20:50:35 +00:00
hwr d313e75afe It does not make much sense to increase a "output" counter on input. 1999-05-04 20:13:09 +00:00
thorpej 9382ef37c1 Define some things related to the PCI Bus binding to OpenFirmware. 1999-05-04 20:08:04 +00:00
hwr 3fa094f8b5 Don't let packets with a Class-D source address escape the host.
Fixes second half of kern/7003 by Jonathan Stone <jonathan@DSG.Stanford.EDU>.
1999-05-04 19:50:23 +00:00
christos caa41a7d21 Fix panic and panicstr to use _C_LABEL.
Statuc: ELF kernel loads symbols properly, hangs in syscall while running init.
1999-05-04 17:29:22 +00:00
fvdl 4fbaa0b272 Restrict "out of CHS range" check to harddisks. 1999-05-04 17:14:55 +00:00
christos a32f7169fc Align struct timeval time to the same alignment requirements of a quad.
This broke the sparc elf kernel which in microtime uses ldd to load both
words at the same time. The a.out kernel, just got lucky.
1999-05-04 16:16:54 +00:00
sommerfe 6f883a0b1c Include checks (under DIAGNOSTIC) to catch vnode lock leaks soon after
they happen (while we still know which remote op is to blame for it),
instead of later when we trip over the already-locked vnode.
1999-05-04 16:08:02 +00:00
sommerfe 623d43160b Fix vnode lock leak in nfsrv_mknod() if to-be-created vnode already existed. 1999-05-04 16:01:37 +00:00
sommerfe c0d15c5c7c Count lockmgr locks held by process if LOCKDEBUG || DIAGNOSTIC.
(previously, it was just under LOCKDEBUG).
1999-05-04 15:58:53 +00:00