Commit Graph

155 Commits

Author SHA1 Message Date
thorpej dc59bc1db3 Update for sys/buf.h/disksort_*() changes. 2000-01-21 23:39:55 +00:00
leo 384bdc532b Implement the DIOCKLABEL ioctl. Through this ioctl it it possible keep the
disklabel on the last close or to drop it.
1999-12-23 21:23:19 +00:00
matt 31ba134e32 use __vax__ and __i386__ instead of vax and i386 1999-11-03 20:50:17 +00:00
bouyer 98b5a519ce In sddump(), check sd->sc_dev.dv_flags once sd has been initialised.
Patch supplied by tsutsui@ceres.dti.ne.jp in kern/8708.
1999-10-30 16:35:12 +00:00
ragge 2674b15280 Don't call dk_establish() on vax either. 1999-10-17 09:44:48 +00:00
enami 46f1868fe7 Cosmetic changes. 1999-10-17 06:22:05 +00:00
thorpej 16a9d90e17 Cleanup the scsipi_xfer flags:
- `flags' is now gone, replaced with `xs_control' and `xs_status'.
- Massive cleanup of the control flags.  Now we explicitly say that
  a job is to complete asynchronously, rather than relying on side-effects,
  and use a new flag to now that device discovery is being performed.
- Do SCSI device discovery interrupt-driven.
1999-09-30 22:57:52 +00:00
enami 31e6da77de Calculate the correct device minor of the first partition. 1999-09-21 03:10:00 +00:00
thorpej f77302e768 Implement detaching SCSI and ATAPI disks. 1999-09-11 21:42:58 +00:00
hannken f04bd56be1 Make `sc_ops->sdo_flush' synchronous. The flags `SDF_FLUSHING' and
`SDF_DIRTY' were never reset because `sddone' doesn't get called from
synchronous scsi commands.
1999-08-26 09:28:17 +00:00
lukem 7d44fa2e6e * use format_bytes() to display the disk size
* wrap a couple of printf()s
1999-05-31 12:05:39 +00:00
explorer 3ebb419571 Update to slightly altered rnd_attach_source() api 1999-02-28 17:08:05 +00:00
bouyer 6dd47fe65f Abort transfer if b_blkno is negative. Closes PR kern/5553 by Johan Danielsson. 1999-02-10 12:29:50 +00:00
bouyer f6f9f8a965 Change DIOCEJECT to do what's needed to eject a device before the eject
command (unlock for sd and cd) if no other partitions are open, return
EBUSY otherwise. DIOCEJECT will have the old semantic if its argument is not
0. The old ioctl has been renamed to ODIOCEJECT for binary compatibility.
1999-02-08 16:33:16 +00:00
bouyer 12868a7d80 Return ENODEV instead of EIO when we are trying to open a device without media
in the drive. restrict "opening of empty drive" to character devices only
(reading a block device returns a short read instead of ENODEV, which can lead
to confusion).
1999-01-29 11:17:58 +00:00
bouyer f52c71b0e8 Allows the raw partition to be open()'ed, even when scsipi_start() fails
(no media or other ...) so that we can always send ioctl's to the device.
1999-01-26 13:59:44 +00:00
bouyer d8f58a3506 Move test for SDEV_NOSTARTUNIT quirk from sd.c to scsipi_start().
Add a SDEV_NOSTARTUNIT quirk entry for BCD-16X 1997-04-25", "", "VER 2.2"
CD-rom (from Michael Santos).
1999-01-19 10:57:11 +00:00
thorpej dcc5f32c2b When closing, wait for pending xfers to drain before unlocking the door,
and wait again before deleting the reference to the adapter.
1998-12-08 00:18:46 +00:00
thorpej 6a60e078ee Add adapter reference counting for SCSI and ATAPI devices. 1998-11-20 00:35:39 +00:00
bouyer 0af9847a2d The ATAPI-specific hack is not needed any more. 1998-11-17 14:46:26 +00:00
thorpej a2cad65f4e Only mark the disk dirty if we write. 1998-08-17 19:30:38 +00:00
mycroft 04f0dc658c Assign my copyrights to TNF. 1998-08-17 00:49:01 +00:00
thorpej 582d4a7856 Should not use SCSI_POLL if the system is not cold. 1998-08-15 01:32:55 +00:00
thorpej b3b533c44d Keep track if the disk has had done i/o, making it dirty. On last close,
or at shutdown, flush the cache if the disk is still dirty and it support
cache flushing.  Fixes PRs #5588 (Jim Bernard) and #5589 (Justin Gibbs).
1998-08-15 01:10:54 +00:00
drochner 32fce55082 Improve generation of default disklabels:
-store printable product ID in cd's and sd's softc, use it as "typename"
-for this, add a "destination buffer length" argument to scsipi_strvis()
-return ATAPI device type for ATAPI devices
1998-08-05 16:29:04 +00:00
thorpej 3cd681ef27 Typo. 1998-07-31 00:42:31 +00:00
thorpej 34529b444b From cd.c: call disk_unbusy() if we are unable to enqueue our command. 1998-07-30 23:57:07 +00:00
mjacob 4205ca3d2a opt_scsiverbose.h now is opt_scsi.h and contains the defopted
SCSIVERBOSE and the new ST_ENABLE_EARLYWARN.
1998-07-30 00:49:19 +00:00
mjacob 66ea6cc018 Fix for kern/3835: add an sd sense handler. If we get a check condition/sense
data ASC/ASCQ of 0x04/0x01 (logical unit not ready, initialization in progress),
hang out for 5 seconds and return a RETRY THE OPERATION command. If we
get a check condition/sense data ASC/ASCQ of 0x04/0x02 (logical unit not
ready, initialization command required), send a polled/nosleep START UNIT
command and return a RETRY THE OPERATION command if that succeeds.

Don't send a START UNIT to a disk quirked as SDEV_NO_START. Don't send
a START UNIT to removable media. The reason for the latter is to not
just blindly spin up new (maybe changed) media.

I should note that I've successfully made this work with the ISP host
adapter so far. Other host adapters will need some work to be able
to manage or reasonably fail NOSLEEP/POLL commands while in this
state. Alternatively, the internal SCSI midlayer structure has got
to allow for more controlled error recovery (e.g., restart queues
controlled by the target driver).
1998-07-15 20:21:12 +00:00
cgd 8a2d9d7d74 in the ATAPI bug workaround code ("HACK"), don't forget to set
SCSI_AUTOCONF when executing SCSI commands.
1998-03-03 23:15:36 +00:00
cgd ed81982205 #if some bug workaround code which only needs to be compiled if
ATAPI 'sd's are present.
1998-01-15 18:59:03 +00:00
cgd 3b207eaf83 add support for an ATAPI attachment for 'sd'.
fix 'cd' driver's NCD_SCSI bogosity (was using testing wrong macro!)
clean up in various ways:
* make common atapi_mode_{sense,select}() functions.
* put ATAPI data structures in more sensible headers, split up by
  device type.
* include headers a bit more carefully.
* pass flags to attachment-specific cd functions, and use them.
* get rid of SCSI bits in scsipi_base.h's scsipi_make_xs(), move
  them into the correct place in scsi_base.c.
* fix minor typo in struct name in scsipiconf.h (which was apparently
  never used except in a #define later in the same file).
* use __attribute__ to force 4-byte alignment for xs command store,
  so that architectures trying to bus_space_write_multi_N() (where
  N > 1) that data to a controller won't lose.
* clean up a few comments in typos, and make a few #defines easier to
  understand/maintain.
* rename cd_link.h to cdvar.h (via repository copy).  This is exactly
  what a 'var' file is supposed to be.
1998-01-15 02:21:27 +00:00
thorpej 93f26b5f40 Adjust for changes to config. 1998-01-12 09:49:10 +00:00
thorpej 75e554c27d Implement two macros, scsipi_command() and scsipi_command_direct(), and
use them to hide the structure of the function pointers we jump through
to issue a command.
1997-10-18 19:50:51 +00:00
explorer 80513cb5ae o Make usage of /dev/random dependant on
pseudo-device   rnd                     # /dev/random and in-kernel generator
  in config files.

o Add declaration to all architectures.

o Clean up copyright message in rnd.c, rnd.h, and rndpool.c to include
  that this code is derived in part from Ted Tyso's linux code.
1997-10-13 00:46:08 +00:00
explorer b5feb41072 Add hooks to insert timing info into the random system 1997-10-10 01:09:03 +00:00
thorpej 939e074dcc Implement DIOCGDEFLABEL. 1997-10-08 23:05:22 +00:00
enami d7d845c3d2 Cosmetic changes to keep coding style consistency in this directory;
- Indent with tab of width 8.
- Use four column to indent continuation line.
- Fold long line if possible.
- Use return (xx) instead of return xx.
- Compare pointer against NULL instead of testing like boolean.
- Delete whitespace at the end of line.
- Delete whitespace in front of function call operator.
- Delete whitespace after cast.
- Dereference a pointer to function explicitly.
- Add an empty line after local variable declaration.
- Use NULL instead of (char *)0.
- Dont use block for single statement.
1997-10-01 01:18:38 +00:00
mjacob 2896e07556 Allow SDOUTSTANDING to be defined elsewhere (e.g., config file). 1997-09-20 18:56:30 +00:00
bouyer 6f3bab1f59 Merge scsipi branch in the mainline. This add support for ATAPI devices
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
fair be20028837 trivial change for PR#3815 1997-08-04 07:16:49 +00:00
phil a8597d8143 Report actual disksize on finding a disk.
(From: der Mouse  <mouse@Rodents.Montreal.QC.CA>)
1997-07-02 03:51:25 +00:00
thorpej 84166e5151 foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
from the disklabel accordingly.
1997-06-24 00:28:36 +00:00
pk 8303adf18a sdsize(): only call sdopen()/sdclose() if not already open, per the
current openmask.
1997-06-18 20:38:59 +00:00
mycroft aca1dae3c4 Push the buffer cleanup code into scsi_done(), and split it so that biodone()
is called *after* the driver `done' routine.  This fixes disk I/O statistics
on SCSI devices.

Also, calling the `done' routine with a `complete' argument of 0 and actually
having it do anything meaningful loses in at least 3 ways, so just nuke the
argument altogether and don't call it this way.  If the driver needs to do
some error handling, that's what `err_handler' is for.
1997-04-02 02:29:30 +00:00
mikel 4a6b41b8fe garbage collect unused variable (was this struct declaration orginally
a typedef?); from Enami Tsugutomo in PR kern/3282.
1997-03-04 06:25:22 +00:00
thorpej 15b56daab6 If posting an error condition because the media has been unloaded,
make sure to set the residual count to reflect that no data was
transfered.

From Naofumi HONDA / MINOURA Makoto, PR #3007.
1997-02-21 23:03:25 +00:00
thorpej 625d310b1b Handle optical disks a little better, from Naofumi HONDA / MINOURA Makoto
in PR #3009, with some slight KNF from me.
1997-02-21 21:51:59 +00:00
cgd ea0c7b4423 update these so they compile whether or not __BROKEN_INDIRECT_CONFIG
is defined.
1996-12-05 01:06:39 +00:00
thorpej 40611b811f Start a mode sense with a clean sense buffer.
Fixes PR #2953, from David M. Stanhope <dms@celtech.com>.
1996-11-29 19:58:40 +00:00