25491e6a22
Power management (well, suspend/resume) is now implemented. Remove
...
it from the TODO list.
2000-11-27 02:37:14 +00:00
248928c7cf
Add a powerhook to reload AC97 registers after a resume.
...
Sound now works after suspend/resume on my Sony PCG-Z505S
2000-11-27 01:56:53 +00:00
7ec52ba411
Improve a debug message.
2000-11-26 21:05:02 +00:00
88bf6139e5
Regen.
2000-11-26 21:04:43 +00:00
63dfc5b570
Add an Intel camera (rfom OpenBSD).
2000-11-26 21:04:20 +00:00
04a83acaf7
lsu -> ld
2000-11-26 19:24:24 +00:00
57ea462da2
lsu -> ld, by popular request.
2000-11-26 17:44:02 +00:00
ee170a5528
Avoid a possible stall.
2000-11-26 16:16:04 +00:00
3c9d9276dc
Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and
...
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
2000-11-26 11:08:57 +00:00
d76cf8b502
Add multiple include detection - all userland installed headers are now
...
safe.
2000-11-26 06:03:24 +00:00
12269bd46c
Don't try to use ultra-dma on sis chips with revision 0xd0. It loses
...
immediately with a lost interrupt on udma mode 2, downgrades to mode 1
at which point it silently corrupts data on high disk activity. This
happens on two out of 3 machines I own that exhibit high disk activity.
2000-11-26 04:59:18 +00:00
2e93099aff
Replace sfb_copycols() which can run better job in some degree.
...
It still fails on certain conditions, thus is left commented out.
copycols() is done by a generic routine which works correctly.
2000-11-25 11:43:42 +00:00
1e1862bc57
Add another font from 4.4BSD-Lite2/luna68k.
2000-11-24 15:47:15 +00:00
b974ee7790
Add TC option card descriptions, which are commented out before NetBSD/pmax
...
yields local implementations to them.
2000-11-24 05:02:26 +00:00
fa19fe52db
adjust the spinlock macros in the non-MULTIPROCESSOR, non-LOCKDEBUG case
...
so that gcc will think that static spinlock are used.
this allows us to remove the ugly conditionalization of
static spinlock declarations.
2000-11-24 03:59:07 +00:00
f6b62f776c
avoid division and remainder operations for devices where
...
the sector size is DEV_BSIZE (ie. practically everything).
2000-11-24 00:17:35 +00:00
0661e6718b
- fix an error in uninitialized variable reference.
...
- add a missing function argument declaration.
- minor comment adjustments.
2000-11-22 06:59:08 +00:00
efadefb53f
In uhci_intr(), only warn about power state confusion if the
...
interrupt was actually for us.
2000-11-22 05:50:59 +00:00
a622a1b6d2
Remove obsolete comment.
2000-11-22 00:32:24 +00:00
690b28f91e
Add a couple of fonts used on Sony NEWS.
...
Generated from (recently removed) sys/arch/newsmips/dev/fnt{,24}.c.
2000-11-21 11:44:45 +00:00
ce10334de9
Fix errors in color lookup table initialization. Glyph is rendered
...
in visible color now.
2000-11-21 07:42:02 +00:00
290a66c213
Reduce probe noise.
2000-11-21 05:23:37 +00:00
1a5d87c9fa
Regen.
2000-11-21 00:25:43 +00:00
219abdb871
Typo.
2000-11-21 00:25:35 +00:00
6faa85c6d3
Note 3Com card support.
2000-11-21 00:25:20 +00:00
6f8985cf15
Regen.
2000-11-21 00:25:04 +00:00
7736bcc821
Add Prolific printer adapter.
2000-11-21 00:24:12 +00:00
e38c89a886
s/iRDA/IrDA/
2000-11-21 00:20:30 +00:00
1964a728da
add moxa
2000-11-20 19:27:16 +00:00
c27af44fc0
Add an attachment for MOXA 168P isa multiport card. This code was
...
written by Christoph Badura.
This was reported to work by user of this code. It's not tested
by me, but it's probably more useful in tree anyway.
2000-11-20 19:24:39 +00:00
2819c7b688
Use DMA from mbuf instead of copy in transmit.
...
Still use memcpy in receiving because we must use buffer fill mode
and many packets may share single receive buffer.
XXX: Workaround(?) for CXD3222: it fails to DMA for selfid packet according
to code placement. I'm not sure about the reason (cache? timing? bug?).
Fixed the bug: transmitter sometimes stop and OACTIVE bit of if_fw
never be cleared.
Fixed the bug: freeing free buffer.
Enable ieee1394_drain and ieee1394_watchdog for loss of fragment.
2000-11-20 12:12:18 +00:00
c62d17a551
rationalize the use of b_flags for geteblk() buffers.
...
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
2000-11-20 08:24:08 +00:00
4e1e677996
regen.
...
CXD32222 -> CXD3222 (Sony OHCI Controller)
2000-11-20 06:23:13 +00:00
e51b1f604e
CXD32222 -> CXD3222 (Sony OHCI Controller)
2000-11-20 06:22:13 +00:00
d81861796a
Add support for Intel ICH2
2000-11-19 15:32:24 +00:00
acc196c4a9
Initialize ring buffer pointers when the ring buffer is allocated.
...
(comsoft() can be invoked before comopen() on serial consoles; a character
received before the console is opened "for real" can result in a fatal trap
unless the ring buffer pointers are initialized early)
2000-11-18 15:46:23 +00:00
0aea00f57c
Regen.
2000-11-18 05:29:27 +00:00
cec0022eeb
Add some 3D Labs products, from XFree86, via groo@netbsd.org
2000-11-18 05:29:00 +00:00
1e533cd38c
Pull up FreeBSD changes:
...
1.39:
Have if_ti stop "hiding" the softc pointer in the buffer region. Rather,
use the available void * passed to the free routine and pass the softc
pointer through there.
1.33:
Add support for the Netgear GA620T copper gigabit card.
1.32:
Tweak probe message so that 1000baseSX and 1000baseT cards are
explicitly identified.
1.31:
Update the Tigon driver to support 1000baseTX gigE over copper AceNIC
cards. This basically involves switching to the 12.4.13 firmware, plus
a couple of minor tweaks to the driver.
NetBSD changes:
get rid of ti_inuse, the mbuf ref counting code should call ti_free() when
needed.
Use hardware 802.1q support.
2000-11-17 19:33:25 +00:00
54e36dbaa6
Update to firmware 12.4.13+wpaul, from FreeBSD
2000-11-17 19:23:35 +00:00
42681a6a9f
Supports ETHERCAP_VLAN_MTU. Tested on sbus hme on Ultra/1.
...
Thanks to Andrei Petrov for the hint !
2000-11-17 19:08:00 +00:00
4046a1bd78
if AC97_CODEC_DOES_VRA is not supported, only print warning than
...
hw Variable Rate Audio is not supported and continue attaching the driver.
This is I believe more correct than what was done in rev 1.5
2000-11-15 21:06:33 +00:00
ef36370776
Regen.
2000-11-15 14:36:50 +00:00
d57ee8b358
Add Sony memory stick.
2000-11-15 14:36:09 +00:00
503701f0d3
OF_nextprop: make OUT argument type `void *'
2000-11-15 14:27:26 +00:00
b84f740be0
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
2000-11-15 01:02:11 +00:00
c0122f4013
Add fwlynx PCI attachment
2000-11-14 23:40:44 +00:00
ffd7494144
Add openfirm
2000-11-14 23:37:58 +00:00
617742b256
Add a fwlynx device. Move the file for fwohci to files.ieee1394
2000-11-14 23:37:20 +00:00
1936d0565a
some cleanup. Add back OFIOCGETOPTNODE.
2000-11-14 21:10:05 +00:00
thorpej