the pmax lance driver that uses the machine-independent am7990.c driver
needs some definitions for it. This is a partial re-merge of NetBSD/alpha's
tc/asic.h back to the pmax, with the addition of symbolic #define's
for registers and bits in registers that are pmax model-specific.
drivers have been fixed to not require "needs-count".
Add back the lines for the "rcons" console driver, even though it's
not merged into the pmax port yet, as conf.h was patched to include
"rcons.h". Adding the device here, but not configuring it (e.g., in
GENERIC) keeps conf.c happy until rcons code is merged.
TURBOChannel cfb has a vertical-retrace interupt that cannot be disabled
in software. 4.4BSD and NetBSD don't supply an interrupt hander and
simply neverenable interrupts from slots with a cfb. This has never
ever worked with a cfb in a 3MIN (Decstation 5000/1xx), where a TURBOChannel
card in slot 0 (or 1 or 2) interrupts at the same IPL as spl0() (or spl1
or spl2), and there's also never been support for selectively enabling or
disabling those interrupts on a 3MIN, in either NetBSD or 4.4BSD.
This revision add an interrupt handler for the cfb, used only on 3MINs,
so that a 3MIN can boot with a cfb as console, and enable/disable of TC
slot interrupts can be debugged. (Serial consoles via ioasic SCCs still
don't quite work, and simply clearing the relevant bits in the R3000 cause
register is apparently over-ridden by a subsequent spl0() somewhere else.)
as it's a driver for a device under a TC IOASIC. The Alpha port also
has its scc driver in tc/scc.c, and the pmax driver scc is nearly the same
as the Alpha.
pmax driver, to be diffable with the NetBSD Alpha driver. Specifically,
the pmax driver now uses register names dev/ic/z8530.h. The driver now
uses new-style config and dynamically-allocated softc structures. The
driver no longer resets the "other" channel on an SCC when changing tty
parameters. The #ifdef'ing away of processing of the output clist for
non-console lines is no longer done. (Non-console serial ttys might even
work now.) Other discrepancies between the pmax and alpha drivers, which I
don't understand yet, are marked by XXXes.
The 4.4bsd pmax console redirection code is still present, protected
by #ifdef TK_NOTYET. Diffs from the Alpha scc driver are now minimal.
Verified to boot on a Decstation 5k/240.
Concomitant changes to code that prints driver/unit name: use dv_xname
and dv_unit, instead of doing pointer arithmetic on elements of the static
softc array.
Remove support for old config. The old-config "driver" structure
is still present, because the pmax non-MI SCSI driver needs it.
Merge some off Per Fogelstrom's changes for the Pica driver,
which uses the machine-independent SCSI code. This is #ifdef'ed
out until the DMA is fixed to work on Decstations, too.
and MAXINE (Decstation 5k/xx), instead of setting them to NULL.
New-config kernels should work on those machines now.
Rename the definition of the struct cfdriver for the IO ASIC from "asiccd"
to "ioasiccd", as the config-file name changed from "asic" to "ioasic".
back to the DECstation. Boots on 3MAX and 3MAXPLUS. The bug-fixes
applied to this driver since it forked off the Decstation code also
seem to fix long-standing DMA problems with the Decstation SCSI driver.
All devices except SCSI disks and tapes are found using new config only.
SCSI disks and tapes are configured using a table edited from an ioconf.c
produced by config.old.
Boots multi-user on PMAX, 3MAX and 3MAXPLUS. The old-style "slot hand fill"
functions for those machines, and the old TurboChannel configuration
main loop, have been removed.
Since new-style config runs later in boot than the old pmax turbochannel
probing, we no longer know what devices will be configured when consinit()
is called. Use PROM output until autoconfig is finished.
the Dallas-compatible real-time clock. The missing entry caused the offset
to end up in the "priority" field. New-style config now boots cleanly on a
KN02 (3MAX).
turhsturbochannel machines. Lifted wholesale from cgd's Alpha
turbochannel code, with changes that reflect the slightly different
bus topology and `slot' numbering on Decstations.
into a separate function for readability. Rework interrupt initialization,
so interrupts are never enabled until configuration has found and
attached all devices. Call spl0() just before probing the scsi bus,
as the DECstation scsi code can't poll, and hangs if interrupts
are disabled.
Add preliminary support for new config, protected by #ifdef NEWCONF/#endif.
Cosmetic changes to swapconf() and setroot() to reduce distance
from Alpha versions of same.
only print diagnostic messages about interrrupt enabling when DIAGNOSTIC
is defined.
Remove old buggy 4.4BSD turbochannel interrupt kludge for ioasic machines
inside "#if 0"/"#endif" as the NetBSD code has been working fine for months.
redirection of console serial input (keyboard, mouse). Fixes non-redirection of
keyboard to X server on a 5k/240. The Mfb and sfb drivers are similarly broken.
to have the same interface as native readdisklabel(), call it cleanly
from caller of readdisklabel(), and fix bug that left d_npartitions at 1
for ultrix-compat labels. Ultrix labels now actually work.
pmax conf.c references them. A cut-and-paste job from the pmax
rzwrite() and rzread(). tzwrite() and tzread() are utterly untested.
tzwrite() should also check for write-protect, or handle writes to a
write-protected tape gracefully.
