only take the bare essentials, which currently means removing
"maxreqlen" from the argument list (all current callers I'm aware
of set it as 0 anyway). Introduce puffs_init(), which provides a
context for setting various parameters and puffs_domount(), which
can be used to mount the file system. Keep puffs_mount() as a
shortcut for the above two for simple file systems.
Bump development ABI version to 13. After all, it's Friday the 13th.
Watch out! Bad things can happen on Friday the 13th. --No carrier--
been nodetofh translated even if they are not valid on the sftp
server anymore, because some nfs client might still be clinging on
to the file handle we are reclaiming now.
Now, when I say support, I mean "support", due to the limitations
of the backend. File handles are valid only for one session, since
nodes can only be identified by pathnames and pathnames don't (all)
fit into the nfs file handle space. Additionally, we can't detect
if a pathname is completely replaced by another file (if it's done
via some other route that through our mount, of course). But then
again, that's an inherent problem with sshfs even without nfs.
accessors for interesting data in it. Namely, you can now get
pu->pu_privdata with puffs_getspecific(), pu->pu_pn_root with
puffs_set/getroot() and pu->pu_maxreqlen with puffs_getmaxreqlen().
(that's what you get when you copypaste code, a cid with a pin
to burst your bubble, that's what you get for all your troubles, I'll
never copypaste again)
CID 4461
files. (It was already possible to use several -s options.)
* Change man page to refer to "-s tgzdir" instead of "-s tempdir",
to reduce confusion between tempdir and temproot.
* Always use a temproot directory, even if passed "-s tgzdir".
* Always invoke "postinstall check", even when not using a source dir.
* Add a BUGS section saying that using -s srcdir is not recommended.
Reviewed by lukem and martti.
repeating the -s option, or by using a colon-separated list.
* Update postinstall(8) man page with some of the text used in
etcupdate(8)'s description of the -s option.
* Remove an outdated comment about invoking etc/postinstall from
the directory in which the tgz is extracted.
* Rename orig_SRC_DIR to SRC_ARG and make related changes.
Reviewed by lukem and martti.
this can happen legally when a file is removed from backing
storage not using this sshfs instance, a readdir is executed for
the parent directory and only then the node gets reclaimed.
* now that there is a mechanism in place which does not require a
pcc to do an sftp transaction, do not yield() in operations where
the final transaction is something where we don't care about the
return value (e.g. close handle). speedup benefit for no cost.
- Remove unused debug and progname variables
- Use return instead of exit() for quiting at end of main()
- Print errors to stderr instead of stdout
From: Slava Semushin <php-coder@altlinux.ru>
dependencies. Just like -P is used for the full dependencies to create
@blddep entries in the PLIST, -T does that as well. To reduce the chance
of confusing older tools, they are sorted after the full dependencies.
Bump pkg_install version to 20070308.
there are zero extra groups, the size of the cmsg is smaller than
sizeof(struct sockcred). This fixes a problem with registering
services during rc.d
while here, validate the pdu header length before using the contents
If specified then checks on the disks BPB are not done, and any existing BPB
is deleted.
This is needed soince newfs(8) doesn't overwrite the BPB - which is basically
the FAT superblock.
Update documentation and add an example of using bootxx_fat16.
reclaimed nodes hanging until all their children have been reclaimed
and then reclaim everything we can as far up to root as possible.
This is because the file system structures are currently interlinked
in a fashion which would make dotdot lookup based on purely a path
instead of a in-memory node parent member pointer very difficult.
Yes, this deserves a closer look some day.
directory entries already in readdir and caches the results instead
of waiting for each individial getattr from the kernel. For
high-latency links the difference in "ls -l" is quite astounding
and even on my lan "ls -lR" is faster than for nfs in a normal
directory hierarchy (i.e. not one artifically setup to have thousands
of files per directory).
TODO: implement some sort of bandwidth/latency measurement in the
code and enable or disable this option based on than information
(and a command-line flag).
by christos@. The comment reads:
# This program is set 0550 because, as security(8) states, it has
# the potential to deplete kernel memory, under certain conditions.
* Sprinkle const.
* Use EXIT_FAILURE instead of 1.
* Use err(), errx().
* Use calloc() instead of malloc()+memset().
* timedc:
* Non-terminated hostnames or unknown tsp_type could
cause a crash due to out-of-bounds reads in msite().
* Check the received packet size.
* Merged duplicated code into functions.
* Moved variables into the relevant scopes.
* Use connect() so that only the receiver can reply,
send()/recv() can be used and rejected packets
are immediately noticed by recv() instead of causing
timeouts.
* Updated manpage.
use of a raw socket for ICMP; thus there is also no need to differ
between privileged and unprivileged commands.
* Switch to user "nobody" after allocating the raw socket.
* Close all file descriptors above 2 (just in case).
* Check the packet size and sender address in daydiff().
* priv_resources(): Use bind() instead of bindresvport() because an
reserved port is not required. This also resolves the interoperability
issue reported in PR bin/35479.
* Replaced most strlcpy() with set_tsp_name() and get_tsp_name() because
strlcpy() could potentially run out-of-bounds and doesn't zero out
unused buffer space.
* Replaced bcopy/bzero() with memcpy/memset().
* Fixed potential alignment/aliasing issues in measure().
* Replace u_short/u_long with uint16_t/uint32_t/in_addr_t where appropriate.
* Renamed sin to addr because sin is a reserved identifier.
* Use bindresvport() instead of looping over bind(); rresvport() returns
a SOCK_STREAM socket not SOCK_DGRAM.
* Remove a few trailing whitespaces
* Rearrange and join to one #if for some headers
Patch contributed by Slava Semushin <slava.semushin@gmail.com>
in private mail.
internal structures around. (yay for assuming that pointers can be held in
an int. bah.)
Not sure if it actually _works_ on amd64, but as the output on my i386
doesn't change pre/post-patching, that seems good enough for now.
should make this work with the IETF standard some day, also.
* kludge with writes and permissions a bit to be able to flush data
cached in ubc to files which are already with r/o permissions in
the backend
Automatically enable writes to the 'labelsector' if necessary.
Detect and recover from problems with the write-protected 'labelsector'
stopping writes to nearby sectors when the non-raw disk device is used.
Support the installation of 512-byte pbr boot code (eg fatboot).
Verify that there is enough reserved space in the bpb (if not all zeros) to
avoid overwriting the start of FAT filesystems.
+ rather than using global variables, accessed all over the place, create
a local structure, and pass it down.
+ add a -p argument to denote a prefix, so that it's possible to record
a different directory hierarchy from the one that was scanned. One
typical use would be:
# ./veriexecgen -v -d /usr/dest/i386 -a -p /usr/dest/i386 -r -o fingers
to create a fingerprint database called fingers from the files located
in the /usr/dest/i386 hierarchy, but without the leading /usr/dest/i386
prefix:
# Generated by agc, Tue Dec 19 13:10:34 2006
/bin/domainname SHA256 12622c8f3698e51f090abf84ce81aaaaa1ed72135291b41a3e7d6c7b6a2a9847
/bin/chmod SHA256 5c3f8fec48601e0eaf7f47522ad8ff9fabb442b123ada97a71de285b4f6bf658
+ make veriexecgen into a host tool
Remove a "(void)&" construction: iop is used by the parent
and always set after the vfork(). Also flag some parameters __unused
so this will compile with -Wextra.
bin/ls sources to libutil:
o Bump libutil minor version number
o Fix uses to include <util.h> to pick up the function definitions
o Fix most uses of flags_to_string() to release the now-malloc()ed result
1. use EXIT_SUCCESS and EXIT_FAILURE, rather than 0 or 1, throughout
2. add some comments
3. use descriptive names for variables, so that their use is easily
gleaned.
or an inability to get the real path, as fatal.
Be a bit more verbose about this in the default case - tell the user
which directory entry caused the failure.
Also introduce a new -W flag, which will warn the user about the
error, but will still continue processing - it treats errors as
warnings, and allows a signatures file to be built.
pushout was called with NULL argument. This has the semantic of using a
working directory of "/", even though already read plist entries are
relative to prefix. The calls to chown and chgrp therefore end up with
the wrong arguments for the current directory. To compensate for this,
don't pushout the first time. As plists are not supposed to have
multiple @cwd entries anymore, this could most likely be simplified, but
that is outside the scope of this commit.
Reviewed by agc@
advantages of our ksh (emacs line editing). There were objections against
using ksh, because our (pd)ksh is not the real ksh. See also the
discussion on tech-userlevel.
Motivation for changing the default from csh is better interactive
usability and desire to use a standard shell, which is already used for
all the system shell scripts.
Approved by core.
about empty bodies in an if-statement, we need to make add some proprocessor
conditionals around these if statements. FFS byte-swapping is sometimes
compiled out of install-media versions of this program.
- For cbq, cdnr, hfsc and priq: if previous stats aren't available yet
then don't show the packet/byte rate.
- Place the count check before the delay and after the stats printing.
This fixes PR #32847
ok tron@
This works around the problems observed on sparc and sparc64 (where
we've disabled use of pthreads) where the BIND applications end up
being killed with SIGTERM instead of exiting gracefully.
vnodes were synced and processed backwards. This meant that the last
accessed node was processed first and the earlierst last.
An extra benefit is the removal of the ugly hack from the Berkly days on
LFS.
In the proces, i've also replaced the various variations hand written loops
by the TAILQ_FOREACH() macro's.
implemented for du.c revision 1.25 :
Use open address hashtable with multiplicative double hash probing
and exponential hashtable growth for tracking previously seen inodes.
This replaces the O(n^2) behavior of linkchk() with an implementation
that should be O(n*logn)
to be a null-terminated string. Otherwise, if the user is not a member
of any secondary groups, buf is completely uninitialized and userinfo
adds garbage to the list of groups printed.
table with 'route -n flush -inet -llinfo -host', which is not only
more concise, but it doesn't require /usr/ to be mounted. This
lets us close bin/11079.
to ffs_find_disk_blocks_ufs2() too. Except for data types the
code in the two functions is the same.
From the original commit message:
Add support for finding files on RAID partitions. This allows us to
add the block list of the 2nd stage boot loader to the 1st stage boot
loader when the partition is a RAID partition.
Briefly tested under 3.x/i386.
Fleming.
This one has some nice options -- for example, an admin can run right
after installing a system:
fpgen -D
and it will fingerprint a set of "common" system directories to the
default loaction. See the man-page for more stuff.
Performance-wise, here are results for both fpgen.sh (old) and this
new tool:
474.599u 574.335s 13:53.05 125.9% 0+0k 0+307io 0pf+0w
0.424u 0.131s 0:00.56 98.2% 0+0k 0+2io 0pf+0w
...guess which is which? (that's ~1500 times *faster*)
- have checkflist do a second possibly case insensitive check for
files which are missing from DESTDIR
- have postinstall require exact case matches for obsolete files
pooka