cgd
7c35662066
add commented out option PCI_CONFIG_DUMP whever there's a PCIVERBOSE.
2000-03-22 00:58:16 +00:00
ad
ce0c2b1962
Attach cac* at pci?, ca* at cac?. Commented out where needs be.
2000-03-16 15:05:18 +00:00
ad
815f93520f
- Attach dpt0 to the isa bus. Commented out since (a) at any valid address it
...
conflicts with too much other stuff (b) if I UTSLed correctly, EISA boards
may be picked up at an "ISA address and an EISA address" - I don't have
enough info on this yet to fix it (c) a DPT HBA at an address usually
assigned to wdc0/1 may get detected as a WD100x controller. Some of them can
emulate a WD100x controller, but the one I tested with doesn't.
- Sync with GENERIC just a little.
2000-02-24 18:49:40 +00:00
ad
660d78e477
[#[@ ]]dpt* at eisa? slot ?
2000-01-13 19:10:22 +00:00
soren
0d5146155c
s/16x450/16x50/
1999-12-12 11:51:29 +00:00
ad
c62af9270a
Note DPT controllers as needed. If it looks like a stripped down GENERIC,
...
it gets it.
1999-09-27 23:59:50 +00:00
augustss
a7cd454b1d
It's time to be COMPAT_14.
1999-07-29 10:37:12 +00:00
fvdl
b82e1a8b93
EXEC_ELF32 is standard now.
1999-07-05 09:14:09 +00:00
bouyer
cbd39e5f67
Document the 'wdc at isa' flags.
1999-05-19 14:41:54 +00:00
explorer
f644cf78d0
remove EXPERIMENTAL comment, enable /dev/random in GENERIC kernels
1999-03-27 07:04:35 +00:00
sommerfe
a9a3ed03ee
Build kernels -Os. Appears to generate smaller code than -O1 or -O2
1999-03-17 18:40:30 +00:00
christos
16f90e3d2a
Enable EXEC_ELF32... It only adds 4K to the kernel, and makes an ELF
...
install floppy to work (from Andrew Gillham)
1999-03-15 07:22:18 +00:00
abs
e54f9521b8
Update IDE comments, from yoavcs@inter.net.il
1999-02-16 17:46:17 +00:00
drochner
c5b4780e5b
update for mouse renaming
1999-01-23 15:35:21 +00:00
perry
d6748769a5
Cut down slightly by reducing md size and commenting out ext2fs
...
support.
(From Havard.Eidnes@runit.sintef.no )
1998-10-12 16:37:44 +00:00
thorpej
29a84ea0ac
UVM+PMAP_NEW is standard now; don't need it in individual config files.
1998-08-31 17:58:44 +00:00
thorpej
cf231bf251
Adapt to MII changes.
1998-08-11 00:28:53 +00:00
perry
f150e8645e
NORVEGIAN -> NORWEGIAN
1998-07-27 23:55:23 +00:00
bouyer
7c050065fd
Correct indent.
1998-07-27 18:42:27 +00:00
bouyer
11245c76f7
Ops, forgot FINNISH_KBD.
1998-07-27 18:38:07 +00:00
bouyer
82370f62b3
Document FRENCH_KBD,GERMAN_KBD,NORVEGIAN_KBD options.
1998-07-27 13:39:51 +00:00
thorpej
fca2dc28ac
Add cs0 at isa? port 0x300, wildcard IRQ and memory address, to pull
...
them from the EEPROM. Wildcard DRQ to force memory-mode operation; this
value is not available in the EEPROM and must be configured manually.
1998-07-27 01:51:29 +00:00
cgd
75da3d4eaa
add device declarations for 'puc'-related devices. Add lpt attaching
...
to puc to the files file, because it can't go in files.pci (see comments
here or there).
1998-06-26 18:58:38 +00:00
lukem
bd8d501f7e
remove options FIFO; it's now the default
1998-06-26 01:53:43 +00:00
enami
e33ef0027d
Remove TAB after `options I686_CPU'.
1998-06-07 02:34:41 +00:00
veego
4519b25f6c
Add options COMPAT_386BSD_MBRPART.
1998-05-31 13:53:42 +00:00
drochner
92b545d880
There are NE2100 compatible cards which cannot IRQ 10.
...
Use IRQ 9 in the default configuration.
(Thanks to Rick Byers <rickb@iaw.on.ca>.)
1998-04-20 10:58:01 +00:00
drochner
6af8040a5c
-"spkr" now attaches to "pcppi"
...
-"le at isa" is split into "depca", "nele" and "bicc"
1998-04-16 22:01:41 +00:00
enami
f7fc870789
Add entry for aic* at isapnp, but comment outed.
1998-04-03 04:35:39 +00:00
enami
6223459801
Add entry for mbe* at pcmcia (but comment outed).
1998-04-03 04:29:52 +00:00
enami
b1b3597d5e
Add entries for ate0 and fmv0 (former is tested but latter is not).
...
Remove fe0.
1998-04-03 04:23:50 +00:00
drochner
db80fc3242
The "pckbd" attribute of pc/vt is now "pckbcport".
...
Use the real console driver name here to make more obvious where
pms and spkr attach to.
1998-03-22 18:18:45 +00:00
augustss
1918ca1e5b
Change ie[01] to ef, ai, and ix so that these kernels can be used again.
1998-03-01 20:45:26 +00:00
mrg
30a584067f
remove paging options from kernel files.
1998-02-06 11:20:27 +00:00
thorpej
b16f0280e3
Add pceb at pci and {eisa,isa} at pceb attachments.
1998-02-06 07:53:26 +00:00
mrg
29e93b8bea
add the i386 MD portions for UVM.
1998-02-06 07:21:42 +00:00
cgd
d6e5187749
add 'sd* at atapibus? drive ?' to all kernel configs already containing
...
an analogous line for 'cd'.
1998-01-15 02:26:26 +00:00
drochner
09354842c5
from Dave Burgess per PR4620:
...
-base address 0x308 is supported by more Wangtek QIC tapes than 0x300
-Ultrastor ISA SCSI adapters can't be set to base address 0x334
(changed to 0x340)
1998-01-14 15:27:43 +00:00
fvdl
4ee07a6d65
Revert I486_PCI_MEM_ENABLED change, it caused too many problems.
1997-11-27 09:58:26 +00:00
kleink
e85ad99e57
Add COMPAT_13.
1997-11-25 20:29:24 +00:00
thorpej
2524b071e8
Add commented-out "I486_PCI_MEM_ENABLED" option, and describe it.
1997-11-24 00:21:48 +00:00
thorpej
f56e6f631f
Add an i/o address for iy0 (from GENERIC)
1997-11-17 03:42:52 +00:00
thorpej
9246032610
Put lc0 at i/o 0x320.
1997-11-17 03:39:42 +00:00
lukem
6c986561ee
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
...
* fix up use of 'options<SPACE><TAB>'
1997-11-17 01:57:23 +00:00
thorpej
6fcc8cd8b1
Add locators for "eg0" device, and enable it.
1997-11-11 05:53:06 +00:00
thorpej
204a7b293b
Sync ISA network device section with INSTALL.
1997-11-05 19:24:27 +00:00
perry
ba2ee23103
Small installation kernel for older machines; fits on 1.2M floppy but
...
doesn't support PCI or PCMCIA.
1997-11-05 03:25:52 +00:00