become ippp (ISDN ppp) and irip (ISDN raw IP). The character device now
are called: /dev/isdn (isdnd <-> kernel communication), /dev/isdnctl (dialing
and other control), /dev/isdntrc* (tracing), /dev/isdnbchan* (raw B channel
access, i.e. for user land PPP) and /dev/isdntel* (telephone devices, i.e.
for answering machines).
In particular, this means that if one member (say the last member) of a tape
set begins with continuation blocks, restore will not consider that tape
to contain all the inodes (curfile.ino==0 at the beginning of the tape).
Close PR #15545.
has historically allowed file systems to be created on non-4.2BSD
partitions, and the ability to do so is quite useful to some people.
* When rewriting the disklabel, don't consider it an error if there's
not a label already on the disk (and thus the rewrite operation fails).
* There is no -indent option to .Bd or .Bl, although you would
never know that from its frequent use in this tree. There is a
"-offset indent" combination that makes sense, and you can certainly
say "-width indent".
* Also, you can't markup the -width option argument, tho you CAN
use a callable macro. So "-width Ar filename" doesn't make sense,
but either "-width Ar" or "-width filename" does, as might something
like "-width xxfilename" for a little extra space.
* There are a lot of needlessly complex hanging tag macros in man4 used
to create simple item lists. Those should be simplified one of these
days before someone copies and edits yet another man4 page.
primary superblocks. This prevents spurious "block could not be read"
messages that might otherwise be seen if the filesystem had not been
properly unmounted.
round has been tested on Solaris/x86 and Linux hosts.
* Add host tools cap_mkdb, ctags, m4, uudecode.
* Protect __RCSID() and __COPYRIGHT() better.
* Reduce the number of places that need to include "config.h", to keep
sources closer to their "vanilla" versions.
* Add more compat #defines and autoconf-checked functions.
- space problems in casts
- don't cast 0, use NULL
- don't have long lines
- don't cast malloc
- use warn/warnx instead of fprintf
- fix bug where a failed mount_mfs would cause the program to continue.
- pass lint
- Always attempt mfs dev if missing /dev/console
- Save and run both MAKEDEV and MAKEDEV.local
- After creating the mfs dev, mknod() and freopen() /dev/console.
- If MAKEDEV is missing do not fail out early, but still create the mfs,
/dev/console.
- If we hit any errors fail out to single user.
This change _only_ affects systems booting without /dev/console.
on the command line with the -u, -g and -p options respectively.
The old malloc() replacement (and related functions) didn't work with
the libc get{pw,gr}nam() functions so it was removed and a separate
memory allocation function added that is only called to allocate the
space for the MFS file system.
Also use a table for the usage flags instead of multiple fprintf()'s
with "if (mfs)" checks sprinkled through.
restricted if -c isn't given; it just confuses a user of newfs (and
the cpg info is printed as part of the display anyway), and prints an
unnecessary warning for mount_mfs.
if there is no command line option and the disklabel gives 0 as the size.
The default used to be 8k, not the default is picked depending on the
file system size. FS < 20M gets 4k, <1G get 8k, and >1G get 16k.
The 16k default was suggested by lukem which FreeBSD is using.
- Change the default cpg from 16 to 65536, which effectively means
that the largest allowable value for cpg will be computed if it's
not specified with -c or in the disklabel for that partition.
This is much more convenient for users.
- Improve the description of the defaults for various options
to define the tape size. Requires the tape driver to either return ENOSPC
at end of media, or 0 when a write is attempted (such as the "early warning"
support in st(4) enabled with "mt eew 1"). From FreeBSD.
- SHLIBDIR Location to install shared libraries if ${USE_SHLIBDIR}
is "yes". Defaults to "/usr/lib".
- USE_SHLIBDIR If "yes", install shared libraries in ${SHLIBDIR}
instead of ${LIBDIR}. Defaults to "no".
Sets ${_LIBSODIR} to the appropriate value.
This may be set by individual Makefiles as well.
- SHLINKDIR Location of shared linker. Defaults to "/usr/libexec".
If != "/usr/libexec", change the dynamic-linker
encoded in shared programs
* Set USE_SHLIBDIR for libraries used by /bin and /sbin:
libc libcrypt libcrypto libedit libipsec libkvm libm libmi387
libtermcap libutil libz
* If ${_LIBSODIR} != ${LIBDIR}, add symlinks from ${LIBDIR}/${LIB}.so*
to ${_LIBSODIR}/${LIB}.so* for compatibility.
* Always install /sbin/init statically (for now)
The net effect of these changes depends on how the variables are set:
1.) If nothing is set or changed, there is no change from the
current behaviour:
- Static /bin, /sbin, and bits of /usr/*
- Dynamic rest
- Shared linker is /usr/libexec/ld*so
2.) If the following make variables are set:
LDSTATIC=
SHLINKDIR=/lib
SHLIBDIR=/lib
Then the behaviour becomes:
- Dynamic tools
- .so libraries used by /bin and /sbin are installed to /lib,
with symlinks from /usr/lib/lib*so to -> /lib/lib*so
where appropriate
- Shared linker is /lib/ld*so
3.) As per 2.), but add the following variable:
USE_SHLIBDIR=yes
This forces all .so's to be instaleld in /lib (with compat
symlinks), not just those tagged by their Makefiles to be.
Again, compat symlinks are installed
- Fix error if first tape was write protected. Fix NetBSD PRs 4754 and 6098.
- Make dump exit codes confirm to manual page.
- Use \a instead of \7 to make noise.
- Fix estimated number of tapes for huge dumps to cartridges.
- Use <sys/queue.h> SLIST_* instead of home-rolled lists.
- Do not exit if unable to read or create /etc/dumpdates.
- Support output (tape) device returning ENOSPC for end-of-media on a write.
Fixes by me:
- Remove unused ddates_in.
- Don't dump core if SIGINFO is received before 1 second has elapsed.
- Only process SIGINFO in current "active" child.
- Don't dump core in -w if dumpdates wasn't readable and ddatev == NULL
- Minor KNF; wrap some lines
past EOM and fail with "short read error". This check was part of
traverse.c::bread(), and was removed when that function was migrated
to rcache.c::rawread() as part of the "read cache" functionality.
This should fix the problem with dump barfing on "short read" when "-r 0",
but I'm still debugging the problem where dump gets to a point and
"does nothing" when the read cache is being used.
tape when a volume is full, and try to reopen the tape drive for 2 mn.
To be used with tape changers which load the next tape when the current one is
ejected.
While I'm there fix eject handling for remote tape.
ifconfig.pppoe* files.
Rename the source directory and files to match the primary purpose
of this utility - probably noone is using this for ISDN now anymore,
as isdnd has simpler ways to acomplish the same.
it conditional on USE_ACORN, and define that if MACHINE is arm26 or acorn32.
This is less than optimal, and maybe we should define it for all ARM systems,
but then disklabel handling across architectures is generally a mess at the
moment.
the label instead. The previous change to use opendisk() prevented
this from working with special fields such as `/dev/wd0b', and this
new method is arguably cleaner anyway. Fixes [misc/14654]
- Don't bother supporting -T for mount_mfs anymore, since it's
superfluous. The option still works (for compatibility reasons), but
it's just ignored and not documented anymore.
- Use an RPM of 10000 instead of 3600 for the fake label (why not :-)
mycroft