92b3e1fecd
Use objcopy to emit the binary and linked around for debugging.
2000-04-16 01:44:36 +00:00
5e9394eecb
move ustarfs to end so that '@" can be avoided. from mhitch.
2000-04-16 01:42:41 +00:00
faec4da943
Add missing cases for MARIAH/SOC/NVAX and fix a comment or two.
2000-04-16 01:41:23 +00:00
162b0b1dab
__P(()) -> __P((void))
2000-03-16 23:21:05 +00:00
3c7a7bf0e0
Install the boot programs in /usr/mdec also. From Todd Whitesel.
2000-03-04 16:17:46 +00:00
4e90241d42
More files that were changed.
2000-01-24 02:54:01 +00:00
362ef7b498
Use romread() routines if we are booted from SCSI disks.
1999-10-23 14:42:21 +00:00
08cf6bea89
Boot block code fixed to 1) understand SCSI disks and 2) read from a
...
ustar filesystem (used in installation).
1999-10-23 14:40:38 +00:00
895fe9eaf6
Add support for 4000/90. Also handle interrupts more intelligent.
...
XXX - countdown doesn't work on 4000/90.
1999-08-23 19:09:27 +00:00
7638e3fbe3
Add boot support for the VAX 3300/3400 LANCE chip.
1999-08-14 19:41:14 +00:00
3766555455
Reset the interface when loading is finished, to avoid spurious writing
...
to memory.
1999-08-07 18:30:36 +00:00
ae5dbfbe84
BI bus files has moved.
1999-08-07 11:19:04 +00:00
2ceba51630
Work with obj dirs (It seems that ${.CURDIR}/... is your friend).
...
If I _had_ to pick an arch on which to learn how this stuff works, it probably
would not have been vax... unless of course I was experimenting with time
compressing drugs. If we have a 1.4.2, this is definitely a candidate.
1999-07-18 05:55:45 +00:00
996e5bf55a
Stop the network interface after kernel is loaded but before starting it.
...
Not doing this caused packets to be read into memory somewhere after the
kernel was started but before the device was probed, normally in the
system page table. This gave quite unpredictable results...
1999-06-30 18:38:03 +00:00
a406e5332c
Clean up the boot command selection a bit. Add a command "halt".
1999-06-30 18:33:33 +00:00
3b8e9ab16d
Support loading the kernel from ustarfs.
1999-06-30 18:30:42 +00:00
04620b62b5
Search for include files in new locations.
1999-06-30 18:19:26 +00:00
7a1f65022b
Remove more unused files.
1999-06-20 16:00:14 +00:00
dc65be6cf8
Remove old unused files.
1999-06-20 15:58:28 +00:00
92a492d5ea
Some 4000/200 fixes. From Michael Kukat.
1999-06-20 15:52:51 +00:00
f1fc4934a3
Use common routines to identify cpu type.
...
Set up a SCB to be able to handle clock interrupts in the boot program.
Now timer countdown should work on all types of vaxen.
1999-05-23 21:58:19 +00:00
fe310dd299
include <lib/libkern/libkern.h> for intoa()/inet_ntoa()
1999-05-07 16:19:27 +00:00
397795c32d
Machines using KA48 must have memory mapped in, and use the same
...
addresses for console as KA46. From Michael Kukat.
1999-04-14 16:19:03 +00:00
60d4b9c2bd
A bunch of small fixes to make boot work on most VAXen.
1999-04-01 20:40:07 +00:00
11f0bebf2b
#define was wrong. Some .c should be .s.
1999-03-27 09:33:30 +00:00
ad22c1dd58
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves.
1999-03-25 23:16:37 +00:00
587eda7c3f
Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
...
ourselves.
1999-03-25 23:11:51 +00:00
9f6b94f820
Outdated files.
1999-03-13 15:14:29 +00:00
fb6b53bfe4
Basic KA48 (VAXstation 4000 VLC) support.
...
From Michael Kukat <michael@camaronet.de>
1999-03-09 12:57:57 +00:00
e1305e82d9
New boot program for vax. Appearance similar to the i386 boot blocks.
1999-03-06 16:36:04 +00:00
3e6d4553d9
Make DHCP/BOOTP the default for VAX net booting
1998-11-11 15:49:02 +00:00
42ed21663a
Make boot recognize MSCP disks on VAX8200. From Sergey Svishchev.
1998-10-21 20:16:33 +00:00
c4ece7cdcb
Commit out include of "../include/macros.h" since its bcopy conflict with
...
the one in "lib/libsa/stand.h".
1998-10-09 06:15:33 +00:00
71364ebea6
Workaround problem with le driver forgetting its address
1998-10-09 06:14:22 +00:00
3d8c929799
Remove define for SUPPORT_BOOTPARAMS and put in the Makefile instead.
...
Fix DHCP code so it works.
1998-10-09 06:13:30 +00:00
7d79b82d33
include <bsd.prog.mk> and make changes so that "make obj" works.
...
Make it easy to build an boot which uses BOOTP/DHCP instead
RARP/BOOTPARAMS.
1998-10-09 06:12:31 +00:00
bbf29cff44
Add strncpy (needed for bootp/dhcp). Tighten up some of the assembly.
1998-10-09 06:09:48 +00:00
58831dae59
Bug fixes and improvements. By Roar Thronæs and myself.
1998-08-31 19:20:24 +00:00
00475fbb1f
New times, new pagesize, use magic number in exec header.
1998-08-22 09:16:45 +00:00
e9534620b0
Netboot support for KA46 (VS4000/60).
1998-08-08 16:10:41 +00:00
a799083fba
Fix netboot support for 3100/m76 which uses diagmem for its lance buffers.
1998-07-26 09:01:23 +00:00
49bb9d8214
adapt to LANCE driver split
1998-07-21 17:36:01 +00:00
1aab7e8c23
Added boot program support for the SGEC Ethernet controller, present on
...
some VAX 4000 maachines. Written by Jay Maynard. (jmaynard@phoenix.net )
1998-07-01 10:52:10 +00:00
52defbf438
Use rom routines on MicroVAX II, so that the QDSS/QVSS display will
...
be used if present. Fix provided by Boris Gjenero.
1998-03-20 16:36:20 +00:00
51964fa1e8
Standalone routine for DEQNA, written by Roar Thronaes.
1998-03-11 22:13:55 +00:00
ad1f451760
Move the boot program higher up in memory; to allow loading of bigger kernels.
1998-02-28 12:10:13 +00:00
7b60c8ed11
Fix multivolume installation bug; PR#4454.
1997-11-10 22:14:16 +00:00
e603ff5aa3
Fix vers.c dependency; PR#4090.
1997-10-20 11:54:26 +00:00
038cd08cce
Make UBA adapter selection work on 8600 again.
1997-10-18 23:39:18 +00:00
616e0b7e33
Copyright assigned to The NetBSD Foundation.
1997-10-05 18:26:38 +00:00
9f009387fc
Must grok includes. Also; prettier compile-time printout.
1997-06-29 21:30:09 +00:00
4d45dc0466
Use correct console on KA65? machines. Bugfix when specifying adaptor
...
number. Show compile-time for boot. Prettier printout.
1997-06-08 17:49:15 +00:00
3611dda5d0
Add better boot support for VS3100/??.
1997-04-10 21:25:18 +00:00
608bad4ba2
Bugfixes to lance routines. Get memory size from rpb to pass to kernel.
...
Support some more CPU types in boot.
1997-03-22 12:47:27 +00:00
8fa1cdb04b
Add routines for network handling and standalone le driver.
...
To make this work nice, big changes to the boot unit handling
was also required. From now only DEC HW unit numbering are used
in boot, to easy match boot device in kernel.
1997-03-15 13:04:22 +00:00
9bf924ecc4
Be able to find out if we are booted from network.
1997-02-27 19:43:26 +00:00
40f0692085
s/tms/mt/
1997-02-12 18:00:42 +00:00
150c33e60b
Use ${INSTALL}.
1996-10-18 05:55:26 +00:00
fdcabd43da
Do not use any emulated insn's in boot program. (in this case cmpc3).
...
Add strncmp to get around this.
1996-08-02 16:18:39 +00:00
5e04d04d68
Add support for booting Vaxstations; from MFM and SCSI. (PROM-based boot).
1996-08-02 11:21:41 +00:00
ce30ddd46b
Obsoleted by now.
1996-07-15 11:50:40 +00:00
640bda0d46
Put in boot support for VAX 8200.
1996-07-15 11:11:01 +00:00
f9ee92c45a
Support installation of /usr/mdec files.
1996-03-16 11:03:11 +00:00
33aad32f37
Accept adapter numbering in boot.
1996-03-16 11:02:28 +00:00
6e51b1e47e
Support for VAX 8600/8650 added. Works with lots of Unibus adapters,
...
and will probably work with Massbus adapters as well. (Not tested,
but it's the same code as for 11/780). Ubareset's may cause crashes
on 8600 also like 11/780, but they are more uncommon. No support
for console RL02 yet, but it's likely to come.
1996-03-07 23:22:34 +00:00
cef093b42e
Add VAX780 support to the boot program.
1996-03-02 14:22:57 +00:00
90b84d2da5
Add standalone driver for TU58 (DECtape II). Now initial installation
...
from TU58 on 11/750 is possible.
Change types on pte pointers, due to the change of pte's from
int to struct pte.
1996-02-17 18:23:18 +00:00
5d668ff961
ASSEMBLER -> _LOCORE
1996-02-02 19:08:33 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
7c65ab14a0
Create libkern as a .a instead of a .o file.
1995-12-28 15:27:21 +00:00
fbc5d6e054
SA_LIB -> SALIB
...
Include rpb.h. Typeclash fixes.
Removed #include of non-existing file.
1995-10-20 13:35:41 +00:00
0b4e25a2c1
Arg to printf forgot.
1995-09-29 16:35:00 +00:00
3579b04cac
Obsolete when not using Microvax rom anymore.
1995-09-16 16:21:56 +00:00
c378250058
Calls to MicroVAX rom routines removed.
1995-09-16 16:20:18 +00:00
67abd74816
struct rpb -> include/rpb.h
1995-09-16 15:58:57 +00:00
01c7626f80
Load microcode file on 11/750.
1995-09-16 15:54:20 +00:00
64a23e9a8b
Take care of xon/xoff (== discard them).
1995-09-16 15:48:49 +00:00
7bffdf561e
Removed bug to prevent division-by-zero when accessing unlabelled disks.
1995-09-16 15:43:25 +00:00
395e73a5d7
ka650 added. Converted to KNF.
1995-09-16 13:34:20 +00:00
ed3a9bf3b0
TMSCP support added.
1995-09-16 13:18:27 +00:00
eefa8685a2
Bootblock support for tmscp added, used on MicroVAX.
...
MicroVAX rom routines not used anymore, too inconsistent when
not using FILES-11 filesystem.
1995-09-16 13:01:06 +00:00
b5733df6fb
Standalone support for TMSCP tapes, based on ra disk driver.
1995-09-16 12:57:35 +00:00
7e902b634e
Foolish and easy standalone prog to edit disklabels.
1995-09-16 12:56:03 +00:00
8feecb9503
Rick Macklem's copy hack that can do standalone (multi-)volume
...
copies from anything to anything.
1995-09-16 12:53:49 +00:00
e11e0f1712
Passing symtab address to kernel.
1995-06-16 15:07:58 +00:00
988e66c172
Pass symtab address to kernel.
1995-06-16 15:06:50 +00:00
589f248bad
Cleanup and fixes for uVAX boot.
1995-04-25 14:14:19 +00:00
887089b1c2
uVAX II support.
1995-03-29 21:35:16 +00:00
9dbb11b582
Added support for uVAX boot.
1995-03-29 21:23:59 +00:00
3b634122a3
Boot program added.
1995-02-13 00:41:04 +00:00
matt