fbf62501af
Mark the "TOSHIBA, XM-4101TASUNSLCD" CD-R for a-sync operation only.
2000-11-14 08:52:35 +00:00
8ba559d056
st_touch_tape(): Pass XS_CTL_SILENT to st_mode_select().
2000-11-03 12:08:41 +00:00
4c7351ec7d
* st_touch_tape(): start probing at the block size from the sense data if
...
we have it.
* st_unmount(): reset density to the device default. This prevents using
stale density values after changing to a medium with different density.
Section 9.3.3 of the SCSI specs states that a device shall return the
density value specified in the last succesfull MODE SELECT after an
unload operation, in case it is not able to automatically determine
the density of the new medium.
2000-11-03 10:46:18 +00:00
e3aaa6c1ab
* Per st(4), retrieving status and setting modes on the control device
...
should succeed even if no media is loaded.
* In stopen(), check the return value of st_mount_tape().
2000-11-03 10:22:02 +00:00
f71476a62f
Introduce ST_Q_ERASE_NOIMM, a quirk indicating that the device rejects
...
an ERASE command with the `Immed' bit on.
Use it on the VIPER 21247 & 21531.
2000-11-02 13:34:59 +00:00
e4958f1fe6
Prevent printing sense information twice.
2000-11-02 13:12:58 +00:00
9c058471c3
Remove useless check for SDEV_MEDIA_LOADED from st_read_block_limits().
...
This command should work whether or not media is present in the device.
2000-11-02 00:56:59 +00:00
3867a66a9a
* In st_touch_tape(), don't bail out if the MODE SELECT fails since we are,
...
after all, probing the device for acceptable parameters.
* In st_loadquirks(), copy mode-specific quirks from the quirk table
to `st_softc'; otherwise all such quirks save ST_Q_FORCE_BLKSIZE are ignored.
2000-11-02 00:52:15 +00:00
5df1120c67
Add some more completion status codes.
2000-10-05 11:23:05 +00:00
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
382141e2f7
Add a new, optional method to scsipi_adapter (scsipi_accesschk()), and use
...
it when considering whether to attach devices. This is to facilitate
`non-SCSI' RAID controller drivers that want to provide SCSI pass-through
services to the kernel.
2000-09-22 16:45:17 +00:00
b0c9fcd14a
Add a NOPREVENT quirk which prevents the sending of PREVENT messages (some
...
manual 9track tapes don't support it). Add a quirk entry for the NCR H621
9track tape drive.
2000-08-16 19:22:25 +00:00
927f61818e
Add "SYMBIOS" processor type to the SDEV_NOLUN category. These are usually
...
the GEM chips on a Sun D1000- and they cause Qlogic SBus firmware to blow
chunks if you access past lun 0.
2000-08-13 00:03:01 +00:00
9766fcf2be
Don't attempt to actually read SAF-TE temperature objects- nobody seems
...
to be obeying the original spec as to what the numeric value means.
Temperature flags are unaffected- these are still the 'pseudo-thermometers'
and overtemp/undertemp warnings will be caught and translated to SES objects
here.
2000-08-08 22:55:30 +00:00
295864adef
During probe, use SCBUSACCEL ioctl to adapters that support it to
...
enable fast/wide/tagged.
2000-08-08 22:46:03 +00:00
8464bde7e8
If the SET_FEATURE for piomode is rejected, fallback to mode 0 instead of
...
reporting an error.
This fixes the "piomode error (0x4)" problem with some ATAPI ZIP drives
reported on port-i386.
2000-08-03 23:14:31 +00:00
1b00421876
Add quirk entry for NEDICOM CRD-BP2, from kern/10738.
2000-08-03 12:36:08 +00:00
ed9ce99d8c
printf format paranoia
2000-07-08 17:12:08 +00:00
b47890a934
Reserve top nibble of status for use by the HBA. It's up to the
...
HBA to set or clear it.
2000-07-06 01:56:23 +00:00
cde72a2c2b
Garbage-collect __BDEVSW_DUMP_OLD_TYPE.
2000-07-05 23:31:12 +00:00
261538ecac
remove include of <vm/vm.h>
2000-06-28 16:39:25 +00:00
666116dd21
<vm/vm.h> -> <uvm/uvm_extern.h>
2000-06-28 16:38:37 +00:00
12d3bf8c1a
Add a callback (*irqack), for controllers that need special action to ack
...
the interrupt once it has been ack'd on the drive.
2000-06-12 21:10:40 +00:00
5a4b9fcbbf
Prevent a process being swapped out during I/O if the data buffer is
...
allocated on stack. This potential problem is noticed by Noriyuki Soda
and the idea and sample code to fix is given by Jason R. Thorpe.
2000-06-09 08:54:19 +00:00
cd4324537d
Density codes are usually given in decimal, so print them that way.
2000-06-06 17:16:02 +00:00
d09ecbdf2a
Add an entry for the HP ScanJet 6300C.
2000-05-31 23:10:39 +00:00
c0f99cc74a
Initialize xs_status to 0 after allocating a scsipi_xfer struct. Makes life
...
easier for driver debugging.
2000-05-31 11:14:25 +00:00
72684ce3ec
Add a method, scsipi_getgeom, to the adapter struct. If this method is
...
present it will be used to get the drive geometry if the MODE SENSE fails.
2000-05-31 09:15:48 +00:00
6b0b8292ff
Add NOMODESENSE quirk for TEAC USB floppy.
2000-05-30 15:16:41 +00:00
61143a446c
Add NOMODESENSE quirk for Y-E data floppy (thanks Jason for reminding me).
2000-05-30 01:49:19 +00:00
997c3c5b8a
Add a quirk, SDEV_ONLYBIG, which implies that the device cannot handle
...
the 6 byte versions of READ, WRITE, and MODE_SENSE.
This greatly simplifies the UFI (USB Floppy) handling.
2000-05-30 01:08:23 +00:00
405302008d
ADEV_CDROM -> SDEV_CDROM, for consistency.
2000-05-29 20:13:06 +00:00
4ba1e04ba2
Handle ADEV_CDROM in quirks table.
...
Quirk entry for another Toshiba cdrom.
2000-05-28 07:03:59 +00:00
cb5289547f
At least try to do something useful in the XS_BUSY case; don't cause
...
a panic by sleeping in an interrupt context.
2000-05-27 23:59:58 +00:00
e662e86225
sd_interpret_sense() can be called from interrupt context; call scsipi_start()
...
with XS_CTL_ASYNC if the failed command was called with XS_CTL_ASYNC.
Add a SDF_RESTART flag to keep state, cleared in sddone().
A mounted disk can now spin down, it will propely spin up at the next access.
2000-05-23 10:20:14 +00:00
373582e298
scsipi_get_xs(): if we have XS_CTL_URGENT, return an xfer even if
...
active >= openings. An XS_CTL_URGENT command could otherwise fail, especially
if openings == 1.
2000-05-23 10:16:43 +00:00
f5d4219e96
Remove an used variable and add a missing `}' so that this compiles.
2000-05-22 16:52:03 +00:00
5f56eae96a
Add a quirk table entry for the OnStream ADR50 Drive;
...
from S.P.Zeidler <spz@serpens.swb.de> in kern/10118.
2000-05-19 06:55:42 +00:00
463931b3ba
Nuke dk_establish() from orbit except from those ports which still use
...
it to determine the boot device: mvme68k, pc532, macppc, ofppc. Those
platforms should be changed to use device_register(). In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
2000-05-16 05:45:44 +00:00
ceb378e070
Add few peripheral device type
...
Remove "???" from T_IT8_1/2. They actually are pre-press devices for graphic arts as described by ASC IT8
Zeros and blanks scsipi_inquiry_data from byte 58 to byte 74 if additional_length is less than 58
2000-05-15 16:35:49 +00:00
7e71ffde06
Sync copyrigth notice
2000-05-15 08:48:25 +00:00
e852afa89f
Fix a typo
2000-05-14 19:52:34 +00:00
f65d97bb57
Change scsipi_inquiry_data strucure to be ANSI SPC-2 rev16 compliant
2000-05-14 18:20:11 +00:00
a2bf544200
Allocate the variable `inqbuf' in scsi_probedev on stack rather than
...
statically. Since this function may called for another luns immediately,
allocating it statically doesn't make sense and may cause race condition
as pointed out by PR#9749.
2000-04-19 04:49:50 +00:00
c560e9a77b
When killing pending xfers on device detach, we can't expect scsipi_done
...
to remove all xfers from the pending queue. It removes only xfers for
asynchronous transactions. So, simply loop over all pending xfers
with calling scsipi_done and wait xfers to drain. Addresses PR#9703.
2000-04-03 03:37:33 +00:00
ae8fb348b3
Fold long line.
2000-04-03 01:40:51 +00:00
b6cee95eb7
Let the device thet gets an atapibus attached specify how to kill pending
...
transfers by giving a function pointer.
The old method always called wdc specific code.
2000-04-02 23:38:19 +00:00
7246364f07
With SCSIVERBOSE, only print sense data if there actually is a problem.
2000-04-02 17:58:17 +00:00
7797648425
Change the initial field in struct ata_atapi_attach and struct scsipi_link
...
slightly to allow scsibus and atapibus to attach to the same device.
Furthermore, only attach a scsibus when the bus type is BUS_SCSI.
2000-04-02 17:25:52 +00:00
28d49dce4e
Add missing protect from disk interrupt while calling scsipi_free_xs.
2000-04-02 03:05:55 +00:00
pk