Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
60,158 Commits 606 Branches 0 Tags 3.1 GiB
1a2a1e2b1f
Commit Graph

1442 Commits

Author SHA1 Message Date
thorpej
a72f993570 When possible, use ring mode for descriptors. Not only is this slightly 
more efficient on genuine DEC chips, but some clones apparently Lose Badly
if you use chain mode.  To further complicate things, some clones *only*
do chain mode, so make this whole mess conditional.
 2000-01-28 23:23:49 +00:00
thorpej
59fbdbb7cb Just use a regular Tx descriptor for the setup packet; don't bother with 
a separate one.
 2000-01-28 22:23:58 +00:00
pk
f18d4a028b Define the fixed hme PHY addresses. 2000-01-28 15:52:34 +00:00
pk
437ad6d192 Reset audio chip on device open. 2000-01-28 15:49:44 +00:00
enami
cf83f4ae57 Use delay by default on hpcmips for now. 2000-01-27 01:05:17 +00:00
thorpej
a697dac5f2 Back out a change I didn't intend to commit. 2000-01-26 06:17:59 +00:00
thorpej
8949eab0cb Split the code that reads the SEEPROM into its own file. 2000-01-26 06:04:37 +00:00
ad
62c4800e7f Argh - add initialization that got lost during editing of previous addition. 2000-01-26 01:23:32 +00:00
thorpej
62fb37ba49 Some changes for the Xircom X3201-3 in 21143 emulation mode: 
- The Xircom doesn't bring itself out of reset; we have to do it.
- The Xircom requires transmit buffers to be aligned to 4 bytes, too.

Partially from Rafal Boni (though the Tx buffer alignment issue is
handled much differently in this version).
 2000-01-25 22:11:12 +00:00
chopps
da499b1e3a make the wait_ready loop use pcic_delay() (thus tsleep) too for cards 
that take a while to become ready
 2000-01-25 19:38:18 +00:00
thorpej
6aca67041c Add a chip type for the Xircom X3201-3, and centralize the declaration 
of the chip names array.
 2000-01-25 19:29:17 +00:00
pk
855fe23671 Prevent possible wayward loop. 2000-01-25 09:30:00 +00:00
enami
5cb9984dd0 Replace long delay with sleep. 2000-01-25 09:17:35 +00:00
enami
012a23a770 Use config_pending and let the kernel thread to attach a card even on boot. 2000-01-25 09:14:27 +00:00
thorpej
8f7ad1f798 When checking for a non-standard address ROM format, allow the 
Cobalt Networks address ROM through.

From Soren S. Jorvang <soren@wheel.dk>
 2000-01-25 03:14:12 +00:00
ad
ea0751f1aa Finish with fixing the SOFTCURSOR stuff. 2000-01-25 02:44:03 +00:00
soda
3d14a7c591 kluge to make this work with NEC M403 (arc/magnum). 2000-01-23 21:06:01 +00:00
thorpej
b176cb0869 Add OPMODE_FD (full-duplex) to the media-related OPMODE bitmask. This 
will cause the Tulip to be reset when this bit is toggled.  This is
apparently required for some chip revs.

From Matt Thomas.
 2000-01-22 21:05:53 +00:00
thorpej
dc59bc1db3 Update for sys/buf.h/disksort_*() changes. 2000-01-21 23:39:55 +00:00
ad
e716b4ba71 Fix register offset problem. This should make EISA boards work correctly, 
and is also needed for the ISA frontend (some time this week).
 2000-01-18 16:50:38 +00:00
mycroft
9efabde18b Rearrange ex_intr() to use C_INTR_LATCH the same way the ep driver does, 
to prevent race conditions.
 2000-01-18 03:35:40 +00:00
itojun
e9100143aa in promisc mode, don't inject outgoing packet to bpf twice. 
this is because the card gets the outgoing packet from itself in promisc mode
(not really IFF_SIMPLEX).
 2000-01-17 07:06:57 +00:00
bouyer
638e1a6958 Improve the downgrade logic: 
- If UDMA 2 is failing try UDMA 1 first, it helps in some cases
- downgrade if we get an error in the first 4000 xfers, or if we get
  4 errors in 4000 xfers if the first 4000 went without troubles.

While I'm there commit a local change I have since some time to get my CD
probed: issue a "blanck" IDENTIFY before the one used to detect slave ghosts,
with my drive the first IDENTIFY following a controller reset fails with an
aborted command ...
 2000-01-17 00:01:00 +00:00
ad
d2d4da8b08 Be consistant when printing haHHBA status. 2000-01-16 14:08:42 +00:00
ad
c02df4a16e Typo. Don't worry, nothing that will cause system instability or data 
corruption.
 2000-01-15 18:13:22 +00:00
ad
d2d9ade964 Validate EATA signature in returned EATA configuration data before anything 
else. More proper than important.
 2000-01-15 18:10:32 +00:00
mjacob
035b04d47a UltraMode is okay for SBus cards with chiptypes of 1020A. 2000-01-14 08:46:37 +00:00
joda
31188c7a4b (tcic_chip_do_mem_map): handle 8-bit memory 2000-01-13 09:38:17 +00:00
joda
4bc55bd307 (pcic_chip_do_mem_map): handle 8-bit memory 2000-01-13 09:00:30 +00:00
ad
192e087585 Make PCDISPLAY_SOFTCURSOR work as it should. 2000-01-12 14:42:21 +00:00
chopps
e8a27771a7 remove unused llc from receive logic, protect use of llc header in tranmist 
logic, fixes pr#9151
 2000-01-09 17:32:58 +00:00
chopps
f3b56e33df rename hl_control to hl_ffb (friendly fudge byte) as per cisco insider 
the belief is that this was used to align OSI clnp header fields better
 2000-01-09 14:47:43 +00:00
chopps
15e3ae96fb pass iso pdus to netiso 2000-01-08 20:46:29 +00:00
nisimura
ddd5fcbf66 Remove tinfo_t symbols which result in never used global common variables. 2000-01-07 08:12:15 +00:00
mjacob
1204bc3a13 Bump up level of some very verbose debugs so that SCSIDEBUG doesn't cause them 
to print.
 2000-01-06 23:02:51 +00:00
mjacob
f90308c0b9 Bump default login time to 60 seconds. Move the spot at 
which we claim we've seen the loop up at least once so
that we don't hang forever coming up. Add in the basics
for MI target mode stuff. Force the outer layers to deal
with a FCP response coming back that has a CHECK CONDITION
but no sense data.
 2000-01-06 03:02:11 +00:00
mjacob
92f150a791 roll revision level and add some taret mode changes 2000-01-06 03:00:11 +00:00
mjacob
02f6f85175 add the enable target mode command, plus some minor fiddles 2000-01-06 02:59:43 +00:00
mjacob
bc8be11468 add isp_print_qentry inline 2000-01-06 02:56:20 +00:00
mjacob
dc86769bb7 Add in MI target mode code modules 2000-01-05 19:50:05 +00:00
ad
e75404417a Add and use pcdisplay_cursor_init(). Still a couple of nits with this, I 
will resolve when I can test properly.
 2000-01-05 16:14:35 +00:00
ad
ea89296a61 Back out previous. A proper fix will follow. 2000-01-05 16:04:00 +00:00
chopps
d8a4f43d0f convert to support non-dma IO (for the isa Riscom/N2). 
allow the user to set and use the internal baud rate generator
fix the transmission ring logic to support more than 1 frame per interrupt
add autodetection of the base clock frequency.
cleanup the receive ring logic
support dynamically resizing the low-water mark on the fifo in response
	to buffer underruns on transmit.
 2000-01-04 06:36:29 +00:00
sommerfeld
9aeb6a25d2 minor KNF tweaks 2000-01-02 02:08:07 +00:00
sommerfeld
b38548c58d On a cold suspend to disk, the Sony VAIO Z505 BIOS appears to not 
preserve enough of the state of the PCIC to keep it interrupting on
card insertion/removal..

Add a power hook to notice if the CSC_INTR device register is zeroed
on resume, and if so, reset it to a sane value.
 2000-01-01 21:57:45 +00:00
ad
6d88cc0622 - Make sense out of comment on dpt_wait(). 
- Trivial streamlining of logic in dpt_poll().
 2000-01-01 19:56:59 +00:00
matt
6b0de2aa24 Off by one error in station events. 1999-12-27 22:41:04 +00:00
matt
711fcf6e2f Add some defensive code to the unsolicited event printing 1999-12-23 18:14:59 +00:00
wrstuden
ba7b2b4124 Make the bitfields in here work on big-endian machines. How this ever 
worked is unclear.

Patch from thorpej, tested by me.
 1999-12-23 00:15:12 +00:00
drochner
b95651b752 set carrier early if used as console or kgdb line, fixes PR kern/6547 
by Andreas Gustafsson, gson@iengines.com
 1999-12-21 11:04:36 +00:00