doesn't have the exec bit set, we need to have PROT_EXEC set
in order for some expected mmap/mprotect behavior to work, so
do the last bit slightly differently: if udv_attach() fails, and
the protection (NOT maxprot) doens't include PROT_EXEC, then clear
PROT_EXEC from maxprot and try udv_attach() again.
Sigh, mmap really needs to be rototilled.
in the mmap() call. maxprot is used to create device mappings,
and always including PROT_EXEC causes the mapping to fail on the Alpha
when mapping a non-RAM offset of /dev/mem (which may be sparse, so
instruction fetch from there is disallowed).
use queue.h macros and KASSERT().
address amap offsets in pages instead of bytes.
make amap_ref() and amap_unref() take an amap, offset and length
instead of a vm_map_entry_t.
improve whitespace and comments.
devices will actually be notified if this is the last close.
this allows raidframe swap devices to be marked clean.
also, move the corresponding vref() into swap_on() for symmetry
and improve some comments.
it and free it as appropriate. Activate p2's new address space once
it references p1's.
- uvm_fork(): Make sure the child's vmspace is NULL before calling
uvmspace_share() (the child doens't have one already in this case).
These changes do not change the behavior for the current use of
uvmspace_share() (vfork(2)), but make it possible for an already
running process (such as a kernel thread) to properly attach to
another process's address space.
to the contents of the hint in the map, and the hint saved in the
map only if the two values match. When an unconditional save is
required, the "check" value passed should be map->hint (and the
compiler will optimize the test away). When deleting a map entry,
the new SAVE_HINT() will only change the hint if the entry being
deleted was the hint value (thus preserving any meaningful hint
that may have been there previously, rather than stomping on it).
- Add a missing hint update when deleting the map entry in
uvm_map_entry_unlink(). This is the fix for kern/11125, from
ITOH Yasufumi <itohy@netbsd.org>.
`struct vmspace' has a new field `vm_minsaddr' which is the user TOS.
PS_STRINGS is deprecated in favor of curproc->p_pstr which is derived
from `vm_minsaddr'.
Bump the kernel version number.
that the page being zero'd was not completed and that page zeroing
should be aborted. This may be used by machine-dependent code doing
slow page access to reduce the latency of running a process that has
become runnable while in the middle of doing a slow page zero.
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
When it wasn't (which could happen on a 4Mb machine with 32kb pages),
uvm_pagealloc_strat could refuse to allocate user memory, while the pagedaemon
didn't think it was worth freeing any more, resulting in the system seizing up.
rlimit in sbrk. Slightly modified from a patch from Artur Grabowski.
- Rearrange code slightly, partially from Artur Grabowski.
- Only adjust vm_dsize if the grow or shrink actually succeeds.
<vm/vm_extern.h> merged into <uvm/uvm_extern.h>
<vm/vm_page.h> merged into <uvm/uvm_page.h>
<vm/pmap.h> has become <uvm/uvm_pmap.h>
this leaves just <vm/vm.h> in NetBSD.
<vm/pglist.h> -> <uvm/uvm_pglist.h>
<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
<vm/vm_object.h> -> nothing
<vm/vm_pager.h> -> into <uvm/uvm_pager.h>
also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
"off_t" and the return value is a "paddr_t" to allow mappings
at offsets past 2^31 bytes. Somewhat inspired by FreeBSD, which
only changed the offset to a "vm_offset_t".
Includes updates for the i386, pc532 and sh3 mmmmap from Jason Thorpe.
doing a cpu_set_kpc(), just pass the entry point and argument all
the way down the fork path starting with fork1(). In order to
avoid special-casing the normal fork in every cpu_fork(), MI code
passes down child_return() and the child process pointer explicitly.
This fixes a race condition on multiprocessor systems; a CPU could
grab the newly created processes (which has been placed on a run queue)
before cpu_set_kpc() would be performed.
state into global and per-CPU scheduler state:
- Global state: sched_qs (run queues), sched_whichqs (bitmap
of non-empty run queues), sched_slpque (sleep queues).
NOTE: These may collectively move into a struct schedstate
at some point in the future.
- Per-CPU state, struct schedstate_percpu: spc_runtime
(time process on this CPU started running), spc_flags
(replaces struct proc's p_schedflags), and
spc_curpriority (usrpri of processes on this CPU).
- Every platform must now supply a struct cpu_info and
a curcpu() macro. Simplify existing cpu_info declarations
where appropriate.
- All references to per-CPU scheduler state now made through
curcpu(). NOTE: this will likely be adjusted in the future
after further changes to struct proc are made.
Tested on i386 and Alpha. Changes are mostly mechanical, but apologies
in advance if it doesn't compile on a particular platform.
which indicates that the process is actually running on a
processor. Test against SONPROC as appropriate rather than
combinations of SRUN and curproc. Update all context switch code
to properly set SONPROC when the process becomes the current
process on the CPU.
uvm_map_pageable(map, ...) implies unlocking passed map, just before the
function call.
- If we bail out before calling the uvm_map_pageable, unlock the map
by ourself to prevent a panic ``locking against myself''. The panic is,
for example, caused when cdrecord is invoked with too large fifo size.
set up quite a few regular ones (at every fork!), so put interrupt-
safe map setup in the slow path with a __predict_false().
uvm_map_reference(): __predict_false() the check for NULL map.
uvm_map_deallocate(): Likewise.
- Make page free lists have two actual queues: known-zero pages and
pages with unknown contents.
- Implement uvm_pageidlezero(). This function attempts to zero up to
the target number of pages until the target has been reached (currently
target is `all free pages') or until whichqs becomes non-zero (indicating
that a process is ready to run).
- Define a new hook for the pmap module for pre-zero'ing pages. This is
used to zero the pages using uncached access. This allows us to zero
as many pages as we want without polluting the cache.
In order to use this feature, each platform must add the appropropriate
glue in their idle loop.
one pmap and activating another. this isn't actually necessary (since
pmap_activate() and pmap_deactivate() affect only user-level mappings,
which cannot be accessed from interrupts anyway), and pmap_activate()
is very slow on old sun4c sparcs so we can't block interrupts for this long.
this fixes PR 8322.
uvm_page_init() has completed, add a boolean uvm.page_init_done,
and test against that. Use this same boolean (rather than
pmap_initialized) in pmap_growkernel() to determine if we are
being called via uvm_page_init() to grow the kernel address space.
This fixes a problem on some i386 configurations where pmap_init()
itself was needing to have the kernel page table grown, and since
pmap_initialized was not yet set to TRUE, pmap_growkernel() was
choosing the wrong code path.
Fix tested by Havard Eidnes.
Add a new type voff_t (defined as a synonym for off_t) to describe offsets
into uvm objects, and update the appropriate interfaces to use it, the
most visible effect being the ability to mmap() file offsets beyond
the range of a vaddr_t.
Originally by Chuck Silvers; blame me for problems caused by merging this
into non-UBC.
amount of physical memory, divide it by 4, and then allow machine
dependent code to place upper and lower bounds on the size. Export
the computed value to userspace via the new "vm.nkmempages" sysctl.
NKMEMCLUSTERS is now deprecated and will generate an error if you
attempt to use it. The new option, should you choose to use it,
is called NKMEMPAGES, and two new options NKMEMPAGES_MIN and
NKMEMPAGES_MAX allow the user to configure the bounds in the kernel
config file.
default, as the copyright on the main file (ffs_softdep.c) is such
that is has been put into gnusrc. options SOFTDEP will pull this
in. This code also contains the trickle syncer.
Bump version number to 1.4O
value (KERN_SUCCESS or KERN_RESOURCE_SHORTAGE) indicating if it succeeded
or failed. Change the `wired' and `access_type' arguments to a single
`flags' argument, which includes the access type, and flags:
PMAP_WIRED the old `wired' boolean
PMAP_CANFAIL pmap_enter() is allowed to fail
If PMAP_CANFAIL is not specified, the pmap should behave as it always
has in the face of a drastic resource shortage: fall over dead.
Change the fault handler to deal with failure (which indicates resource
shortage) by unlocking everything, waiting for the pagedaemon to free
more memory, then retrying the fault.
not set, unlock the vnode before calling the device's close routine and
relock it after it returns. tty close routines will sleep waiting for
buffers to drain, which won't happen often times as the other side needs
to grab the vnode lock first.
Make all unmount routines lock the device vnode before calling VOP_CLOSE().
calls to reflect this. Also, block statclock rather than softclock during
in the proclist locking functions, to address a problem reported on
current-users by Sean Doran.
thorpej