erh
177a7fac85
Moved to svr4_errno.c,v
1998-10-23 04:02:18 +00:00
erh
436999b6cd
Moved from svr4_error.c,v
1998-10-23 04:02:17 +00:00
erh
907ec5233d
linux_error.c moved to linux_errno.c
1998-10-23 03:56:22 +00:00
erh
8b351f0104
Change linux_error to native_to_linux_errno. Add some (unrelated) debugging printfs.
1998-10-23 03:53:18 +00:00
erh
76aa1f4bcf
Moved to linux_errno.c,v
1998-10-23 03:46:25 +00:00
erh
a766015254
Moved from linux_error.c,v
1998-10-23 03:45:37 +00:00
erh
36d1163663
Move ibcs2_error.c back to ibcs2_errno.c. Old name was more descriptive. Make it more so and use "native_to_ibcs2_errno".
1998-10-23 03:22:59 +00:00
thorpej
afbf922a93
Don't print the revision of the 3c905B-TX's internal PHY; it's meaningless.
1998-10-23 01:52:50 +00:00
thorpej
322ba3cc84
Make sure the parent is an `ex'. The 3c905B-TX's internal PHY isn't
...
the only one w/ non-existent ID registers. SIGH.
1998-10-23 01:43:09 +00:00
ender
2055d846f9
New ADB "bus" interface:
...
o Separate ms and kbd drivers
o aed device for compatibility
o debug message cleanup in hardware direct support (from scottr)
1998-10-23 01:16:22 +00:00
thorpej
978c3d97f5
For consistency w/ FFS/LFS, define EXT2_DINODE_SIZE, and use it instead
...
of pointer arithmetic and/or sizeof(struct ext2fs_dinode).
1998-10-23 00:33:23 +00:00
thorpej
5ecbc50348
Use DINODE_SIZE rather than sizeof(struct dinode).
1998-10-23 00:32:35 +00:00
thorpej
f7948d05a1
Use DINODE_SIZE rather than pointer arithmetic.
1998-10-23 00:31:28 +00:00
thorpej
c8a2232a27
Define a symbolic constant to represent the size of a dinode.
1998-10-23 00:28:45 +00:00
jonathan
0582e98991
Treat Wangtek QIC-150 SCSI tapes the same as Viper, so they work on
...
3100s as well as with the asc driver.
1998-10-22 23:01:45 +00:00
drochner
b301435840
back out last change - this file in unrelated to wscons stuff
1998-10-22 18:50:17 +00:00
drochner
01d6f66b07
adapt to keyboard driver changes
1998-10-22 18:37:57 +00:00
erh
dd1e5f373e
Define LINUX_GCC_SIGNATURE.
1998-10-22 18:13:02 +00:00
drochner
00d699282f
separate keyboard handling from serial interface handling some more,
...
improve bell handling, initialize kbd on powerup
1998-10-22 17:55:20 +00:00
bouyer
31dec5ddc5
Add config flags for pciide: 0x001 forces the use of DMA when the driver
...
don't know how to set the controller's modes.
1998-10-22 15:11:39 +00:00
nisimura
f6490fe309
- General cleanups for NWSCONS zskbd.c and zsms.c Comments for
...
future improvement work.
1998-10-22 08:37:16 +00:00
scottr
5cb5f44921
Defopt ALTXBUTTONS, DISABLE_EXT_CACHE, and ZS_CONSOLE_ABORT.
1998-10-22 04:36:50 +00:00
briggs
b70011edac
wscons mouse interface for DEC mice off the Zilog SCC.
...
Ported from dev/sun/ms.c by Takuya Koumoto <takuya-k@is.aist-nara.ac.jp>.
1998-10-22 01:56:55 +00:00
briggs
2db4e51dad
Kernel config for wscons/serial console support for TC alphas, based on
...
GENERIC. This can go away when NEW_SCC_DRIVER hits prime-time.
1998-10-22 01:05:36 +00:00
briggs
ab9470909c
Preliminary support for both serial consoles and kbd/display wscons
...
consoles for TC alphas. Based on code from Takuya Koumoto
<takuya-k@is.aist-nara.ac.jp> as well as some parts of Toru Nishimura's
and Matthias Drochner's work on pmax wscons. This relies on the
NEW_SCC_DRIVER.
1998-10-22 01:03:07 +00:00
briggs
605b15b723
Code from Toru Nishimura and Matthias Drochner work on pmax wscons in a
...
very slightly modified form for wscons support on the TC alpha.
XXX This could use some more work, but this code should be sharable
among the alpha and pmax systems as-is.
1998-10-22 00:53:24 +00:00
briggs
a8950dafc6
Updates from Takuya Kuomoto for wscons support for TC alphas.
1998-10-22 00:50:00 +00:00
tron
bac6bb6bf2
No need to get definition of "SYSV..." from "opt_sysv.h" because they
...
must be set if these files are compiled.
1998-10-21 22:24:28 +00:00
ragge
42ed21663a
Make boot recognize MSCP disks on VAX8200. From Sergey Svishchev.
1998-10-21 20:16:33 +00:00
bouyer
88d1b8138c
If WDC_DIAGNOSTIC is defined, check in wdcstart() that we are called at
...
splbio.
1998-10-21 09:12:46 +00:00
tsubai
325ecdada1
Use PCI function number correctly.
1998-10-21 08:58:36 +00:00
pk
890e54bee0
Pull in cpuvar.h to get definition of `curproc'.
1998-10-21 07:11:47 +00:00
thorpej
c0ba12768e
Fix a sight open flags buglet pointed out by Matthias Scheler.
1998-10-20 22:26:04 +00:00
is
a2386d4325
fully implement soft callback usage
1998-10-20 22:18:13 +00:00
augustss
8aaec6d337
Fix typo.
1998-10-20 21:28:32 +00:00
augustss
1074ab2039
Make seq_input_event() static to avoid a name clash with the (commercial)
...
OSS audio LKM.
1998-10-20 21:19:22 +00:00
bouyer
1456b01d77
Fix for Apollo DMA mode (not UDMA): DMA mode = PIO mode - 2, not PIO mode + 2 !
1998-10-20 18:47:45 +00:00
chuck
ce89209d42
when transmitting we cannot totally fill the circular buffer (i.e.
...
we can't use up all of the remaining sc->txslot[chan].bfree free
bytes) because that would cause the circular buffer read pointer
to become equal to the write pointer, thus signaling 'empty buffer'
to the hardware and stopping the transmitter. spotted and fixed
by Kenjiro Cho <kjc@csl.sony.co.jp>
1998-10-20 17:53:54 +00:00
bouyer
794fadcf0a
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:26 +00:00
bouyer
7bdbb5c993
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt(). Also use interrupts for wd_get_params in wdopen().
1998-10-20 17:00:25 +00:00
bouyer
a7c841cfbc
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:24 +00:00
tsubai
e6efdfc6af
Add via-pmu support.
1998-10-20 15:13:14 +00:00
tsubai
330d14c254
Oops, forgot to add them.
1998-10-20 14:59:16 +00:00
tsubai
6f402eb495
Add via-pmu support (only PowerBook 2400c/180 is tested).
1998-10-20 14:56:30 +00:00
simonb
e35fe182af
Remove commented out OPTIONS DEC_5100 line - there was already an
...
uncommented line above for the 5100.
Mention "kn04" (the 5000/150) on the DEC_3MIN options line.
1998-10-20 03:03:04 +00:00
matt
3ad026ac87
vax -> __vax__ (and mips to __mips__ in ultrix_misc.c)
1998-10-20 01:46:27 +00:00
thorpej
167e694c99
Regen.
1998-10-20 01:39:41 +00:00
thorpej
1715793000
Add RealTek 8129 and 8139 10/100Mb Ethernet IDs.
1998-10-20 01:38:57 +00:00
thorpej
f69c40b8be
Fix a memory leak in fxp_stop(), from the FreeBSD driver.
1998-10-19 23:51:15 +00:00
tron
eb17acb9b3
Defopt SYSVMSG, SYSVSEM and SYSVSHM.
1998-10-19 22:43:58 +00:00