symlinks, and thus can operate on symlinks. remove a bogus comment in
chflags(1) that claims symlinks do not have file flags.
XXX: todo -- make chflags(1) use lchflags(2) when given the right options.
getnewvnode() has been changed to virtually guarantee that we'll have more
vnodes than "desired", so previously there would always be more vnodes
than namecache entries. this fixes PR 9792.
* Remove the casts to vaddr_t from the round_page() and trunc_page() macros to
make them type-generic, which is necessary i.e. to operate on file offsets
without truncating them.
* In due course, cast pointer arguments to these macros to an appropriate
integral type (paddr_t, vaddr_t).
Originally done by Chuck Silvers, updated by myself.
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
in vfs_detach(). vfs_done may free global filesystem's resources,
typically those allocated in respective filesystem's init function.
Needed so those filesystems which went in via LKM have a chance to
clean after themselves before unloading. This fixes random panics
when LKM for filesystem using pools was loaded and unloaded several
times.
For each leaf filesystem, add appropriate vfs_done routine.
metadata. If you do call it, there's actually a fair chance that it
will panic because its metadata dependencies were not cleared in
the VOP_FSYNC above (with FSYNC_DATAONLY).
mode and ownership bits are flushed to disk before the vnode is
reclaimed.
The check, introduced in the softdep merge, assumes that if no blocks
are dirty, no file data *or metadata* needs to be flushed to disk. This
is true of ffs, but is not true of lfs, and may not be true of other
filesystems.
Tested by myself and Bill Squier <groo@cs.stevens-tech.edu>.
disk space rather than doing it in timeout handler. This fixes long
standing bug that accounting file can't be put on NFS file system (so,
e.g, we couldn't turn on accounting on diskless system).
between protocol handlers.
ipsec socket pointers, ipsec decryption/auth information, tunnel
decapsulation information are in my mind - there can be several other usage.
at this moment, we use this for ipsec socket pointer passing. this will
avoid reuse of m->m_pkthdr.rcvif in ipsec code.
due to the change, MHLEN will be decreased by sizeof(void *) - for example,
for i386, MHLEN was 100 bytes, but is now 96 bytes.
we may want to increase MSIZE from 128 to 256 for some of our architectures.
take caution if you use it for keeping some data item for long period
of time - use extra caution on M_PREPEND() or m_adj(), as they may result
in loss of m->m_pkthdr.aux pointer (and mbuf leak).
this will bump kernel version.
(as discussed in tech-net, tested in kame tree)
the change constitutes binary compatibility issue hen sizeof(long) !=4.
there's no way to be backward compatible, and only guys affected
are IPv6 userland tools.
From: =?iso-8859-1?Q?G=F6ran_Bengtson?= <goeran@cdg.chalmers.se>
amount of physical memory, divide it by 4, and then allow machine
dependent code to place upper and lower bounds on the size. Export
the computed value to userspace via the new "vm.nkmempages" sysctl.
NKMEMCLUSTERS is now deprecated and will generate an error if you
attempt to use it. The new option, should you choose to use it,
is called NKMEMPAGES, and two new options NKMEMPAGES_MIN and
NKMEMPAGES_MAX allow the user to configure the bounds in the kernel
config file.
1) fix typo preventing compilation (missing comma).
2) in SLOCK_WHERE, display cpu number in the MP case.
3) the folowing race condition was observed in _simple_lock:
cpu 1 releases lock,
cpu 0 grabs lock
cpu 1 sees it's already locked.
cpu 1 sees that lock_holder== "cpu 1"
cpu 1 assumes that it already holds it and barfs.
cpu 0 sets lock_holder == "cpu 0"
Fix: set lock_holder to LK_NOCPU in _simple_unlock().
cause a core to drop, and whether the core dropped, or, if it did
not, why not (i.e. error number). Logs process ID, name, signal that
hit it, and whether the core dump was successful.
logging only happens if kern_logsigexit is non-zero, and it can be
changed by the new sysctl(3) value KERN_LOGSIGEXIT. The name of this
sysctl and its function are taken from FreeBSD, at the suggestion
of Greg Woods in PR 6224. Default behavior is zero for a normal
kernel, and one for a kernel compiled with DIAGNOSTIC.
to go to the inversion list is incomplete. If the cylinders are equal
block numbers must be checked.
This caused lockups if some buffers with the same cylinder were cycling
through the list, as it may happen with softdep enabled.
Fixes PR #9197.
- If RB_ASKNAME, only dumpdv holds the results asked interactively.
Examie dumpspec only when !RB_ASKNAME. This allows us to override
dumps on none in kernel config file by booting kernel with RB_ASKNAME.
- Slightly rearrange code so that it more matches to comment.
execute certain functions when a process does an exec(). Currently
uses a global list. Could possibly be done using a per-process list,
but this needs more thought.
until all device driver discovery threads have had a chance to do their
work. This in turn blocks initproc's exec of init(8) until root is
mounted and process start times and CWD info has been fixed up.
Addresses kern/9247.
The rule is that you don't get to call scheduler-related functions (e.g.
wakeup()) above the clock interrupt. Going to statclock unnecessarily
hoses e.g. serial interrupts on the SPARC.
be issued/completed in order; that is, provide a barrier for I/O queues.
- Change the buffer driver queue links to a TAILQ, rather than using
a home-grown equivalent. Provide BUFQ_*() macros to manipulate buffer
queues; these deal with the barrier provided by B_ORDERED.
- Update disksort() accordingly, and provide 3 versions:
- disksort_cylinder(): historical disksort(), which keys on
b_cylinder (and b_blkno for the case when b_cylinder matches).
- disksort_blkno(): sorts only on b_blkno. Essentially the
same as disksort_cylinder(), but with fewer comparisons.
- disksort_tail(): requests are simply inserted into the queue
at the tail. This is provided as an option so that drivers
can simply have a pointer to the appropriate sort function.
Note that disksort() now pays attention to B_ORDERED.
if you com* at pcmcia?, and com3 and com4 as pcmcia cards, and removed
and reinserted the card that was com3, it would become com5. if you then
removed and reinserted com4, it would become com6. etc.) Now, instead
of incrementing FSTATE_STAR configuration entries for a driver when
a cloning instance is attached, leave it alone, and scan the device softc
array (starting at the first cloning unit number) for units which are
available for use. This wastes a tiny bit of time (can require a linear
scan of the softc table for the device), but device attachment should be
relatively infrequent and the number of units of each type of device
is never particularly large anyway.
(Previously buffers could be marked dirty by the cleaner, and possibly by
other means.)
Also check for softdep mount in vfs_shutdown before trying to bawrite
buffers, since other filesystems don't need it and lfs doesn't bawrite.
(This fragment reviewed by fvdl.)
Partially addresses PR#8964.
due to massive changes in KAME side.
- IPv6 output goes through nd6_output
- faith can capture IPv4 packets as well - you can run IPv4-to-IPv6 translator
using heavily modified DNS servers
- per-interface statistics (required for IPv6 MIB)
- interface autoconfig is revisited
- udp input handling has a big change for mapped address support.
- introduce in4_cksum() for non-overwriting checksumming
- introduce m_pulldown()
- neighbor discovery cleanups/improvements
- netinet/in.h strictly conforms to RFC2553 (no extra defs visible to userland)
- IFA_STATS is fixed a bit (not tested)
- and more more more.
TODO:
- cleanup os-independency #ifdef
- avoid rcvif dual use (for IPsec) to help ifdetach
(sorry for jumbo commit, I can't separate this any more...)
uncleanly due to a lost connection, it would hang in closef() waiting
for the usecount to go back to 1.
An audit of FILE_USE() vs FILE_UNUSE() usage led me to discover some
incorrect error-path code..
In sys_fcntl(), avoid leaking a file descriptor usecount in an error
case of F_SETFL; don't return, instead go to "out" to clean up. I
suspect that the F_SETFL would fail because vop_fcntl is not
implemented in deadfs.
just for reference purposes.
This commit includes 1.4 -> 1.4.1 sync for kame branch.
The branch does not compile at all (due to the lack of ALTQ and some other
source code). Please do not try to modify the branch, this is just for
referenre purposes.
synchronization to latest KAME will take place on HEAD branch soon.
to be back on the AGE queue. Otherwise we risk recycling a set
of buffers with (soft) dependencies on the AGE list, which may
last forever if the vnode they belong to is locked (i.e. the syncer
won't get to the buffers they depend on, so their dependencies
are never flushed).
are handled as arrays; that is, a truncated old value is returned, alongside
with ENOMEM, if the buffer is too small.
- in all int, quad, and single struct cases, and all specials handled inside
this file, oldlenp semantics are now as documented in the manual page, that
is, a NULL oldp, but non-NULL oldlenp returns the needed size
[I had to change the oldlenp handling, so I thought I should make it as
advertized. Formerly, the subroutines would not know when a NULL oldlenp
was passed, do the work anyway, and the value would be thrown away.]
This is needed as a first step to make gethostname() and getdomainname()
conform to its own manual page and SUSV2. (See pr 7836 by Simon Burge)
default, as the copyright on the main file (ffs_softdep.c) is such
that is has been put into gnusrc. options SOFTDEP will pull this
in. This code also contains the trickle syncer.
Bump version number to 1.4O
be used uninitialized when name[0] != PROC_CURPROC and
proclists[0]->pd_list == NULL; actually, this can never happen
(proclists[0] == &allproc), but the compiler can not know this, so it
complains
recover from failures to accept a socket successfully. Problem suggested
by this:
> It would appear (from two "panic: closef: count < 0" failures in less
> than 12 hours) that Darren's fix to accept(2) for lost file descriptors
> isn't quite correct. His fix inserts a call to closef() to handle one
> of several possible error conditions. However everywhere else in the
> socket code in the same file where falloc() cleanup is necessary the
> function used is ffree().
core filename format, which allow to change the name of the core dump,
and to relocate it in a directory. Credits to Bill Sommerfeld for giving me
the idea :)
The default core filename format can be changed by options DEFCORENAME and/or
kern.defcorename
Create a new sysctl tree, proc, which holds per-process values (for now
the corename format, and resources limits). Process is designed by its pid
at the second level name. These values are inherited on fork, and the corename
fomat is reset to defcorename on suid/sgid exec.
Create a p_sugid() function, to take appropriate actions on suid/sgid
exec (for now set the P_SUGID flag and reset the per-proc corename).
Adjust dosetrlimit() to allow changing limits of one proc by another, with
credential controls.
- Call configure() after setting up proc0.
- Call initclocks() from configure(), after cpu_configure(). Once the
clocks are running, clear `cold'. Then run interrupt-driven
autoconfiguration.
Tree structure:
- sys/arch/sh3: sh3 generic code
As commented, in-chip device drivers are put into sys/arch/sh3/dev.
- sys/arch/evbsh3: sh3 evaluation boards (pure sh3 CPU, no fancy external HW)
- sys/arch/mmeye: Brains mmEye, www.brains.co.jp
MI source code includes couple of #ifdef for sh3-coff support.
(sh3 uses coff or elf)
Needs some more improvements, especialy in sys/arch/sh3/conf/files.sh3,
to compile the tree (due to last minute tree structure change).
approximation of reality if the MD code doesn't. This variable is the
equivalent of "tickfix" for the non-NTP path.
This allows an alpha kernel (where hz=1024) with "options NTP" to
synch up quite nicely (as opposed to having an frequency error of
~560ppm, which is outside the capture range of the PLL).
If the entry is found in name cache, cache_lookup() does all the
necessary locking now, simplifying the interface and making the
code easier to follow and maintain.
The code now also removes the entry from cache when it's either invalid
(vget() fails) or the vnode has been recycled while waiting for the lock.
In that case, unlock/relock of the directory vnode has been eliminated too.
Both changes could lead to sligh performace improvement in same cases.
Furthermore, obscure bug has been found and eliminated for ISDOTDOT in the
lockparent && ISLASTCN case: if the vget() succeded and the re-lock
of the directory vnode not, we returned the error with the '..' vnode still
locked.
For simplicity, cache_lookup() now returns 0 if the positive entry was found
in cache, -1 if not found and ENOENT or error returned by the locking
functions in any other case.
Many thanks to Bill Studenmund and especially Charles Hannum
for invaluable advices and code to get this right.
Tested by: jdolecek
Rewieved by: wrstuden, mycroft
mrg