Commit Graph

503 Commits

Author SHA1 Message Date
is bc72f5a29c Make it table-driven. Besides making adding more devices easier, the resulting
code is 14% smaller (alas, for this file only).
1998-12-26 22:22:58 +00:00
is 920aad33e4 Support for Hypercom 3+ / 4+. Untested yet, but its only some additional
entries in a table.
1998-12-14 20:33:45 +00:00
mjacob 74bc9f26d5 Update HBAs to incorporate the new max_lun property. 1998-12-05 19:43:33 +00:00
is b36e0e66ff Fix typo. 1998-11-28 14:46:53 +00:00
thorpej 5f0577babc Adapt to the new scsipi_adapter interface. 1998-11-19 21:43:00 +00:00
mhitch f6adcd4690 Some CyberStorm MK I SCSI modules use the same product ID as the Fastlane.
Add a check for that product ID and not a Zorro III address.
1998-11-14 21:48:22 +00:00
veego 17509cc037 Add the Ariadne II. 1998-11-11 22:28:32 +00:00
veego 1449b87b11 New driver for the Ariadne II. 1998-11-11 22:26:27 +00:00
frueauf b1122614c3 Add braces to make egcs happy. 1998-11-05 14:13:59 +00:00
thorpej 29d472f53d Garbage-collect the open_target_lu and close_target_lu entry points from
struct scsipi_adapter; they were not used.

Add a scsipi_ioctl entry point to struct scsipi_adapter.  This will be
used to issue ioctl commands to the host adapters.

Inspired by PR #6090, from Matt Jacob.
1998-10-10 00:28:28 +00:00
tron 8362affa14 Add a few "nop" instructions to make the memory size probe more reliable. 1998-10-06 22:26:42 +00:00
is 95807e512a Garbage collect unused 3rd parameter to comprobe1(). 1998-09-16 21:30:58 +00:00
is 0eb25ce882 Add support for Apollo-68060-board-reworked A3000 motherboards.
This is only tested on the original A3000...
1998-09-04 22:00:27 +00:00
is a99b5503f1 Account for the 68060 store buffer. 1998-09-04 21:19:07 +00:00
is a3ee69c87a Split SMC chipset ARCnet driver into
- machine independent chip driver, in dev/ic/smc90cx6.c/...reg.h,...var.h,
  using bus_space methods
- ZBUS frontend in arch/amiga/dev/if_bah_zbus.c
- added IPL_SOFTNET to arch/amiga/include/intr.h, for this
Implementing the ISA bus frontend is left as an exercise to the reader.
1998-09-02 22:32:06 +00:00
mhitch 1d7e0301d3 Quick fix for TS_WOPEN -> t_wopen change. Compiles, but I can't verify
that it actually works again.
1998-09-01 02:33:32 +00:00
mhitch b741e97082 Quick fix for TS_WOPEN -> t_wopen change. Compiles and works. 1998-09-01 02:30:29 +00:00
is 9948205c5a Prepare for support of Apollo-cpuboard-reworked A3000 mainboard SCSI. 1998-08-21 19:13:27 +00:00
augustss cd09067eb4 * Redo the way the way the MIDI driver attaches to audio devices.
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
  The opl driver is not finished yet; it sounds pretty awful.

For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
mycroft a1ac68819f Assign my copyrights to TNF. 1998-08-17 00:26:32 +00:00
mycroft d07b3639a4 Assign my copyrights to TNF. 1998-08-15 17:47:15 +00:00
mycroft 6d3d8a1350 Make copyright notices with my name consistent. 1998-08-15 03:02:31 +00:00
is f8dd65f3f5 Fix ommision in last backout. 1998-08-10 20:23:50 +00:00
is c81476c89d ISDN Blaster / Master: ZBus attachment / SUPIO driver. 1998-08-10 18:53:31 +00:00
is e5439fc15b Back out last change --- it doesn't work this way 1998-08-10 18:43:06 +00:00
is 878203d616 Cosmetics: it's a "HyperCom 3Z" on a ZBUS, no "HyperCom 3". 1998-08-09 22:25:18 +00:00
is 98f1a01dec Actually probe the hardware.
This is for HyperCom 3i slaveboards (to be done soon) that might or might not
sit on top of a HyperCom 3Z or HyperCom 4 or ISDN Blaster.
1998-08-09 22:08:40 +00:00
is 8eebf1cfc5 yet more atomic operations accessing DraCo registers 1998-07-26 06:45:17 +00:00
is 0751419914 Back out previous change. It breaks Seyon in a non-obvious way. 1998-07-22 19:13:02 +00:00
drochner 49bb9d8214 adapt to LANCE driver split 1998-07-21 17:36:01 +00:00
is 6054d626f9 Switching dev/ic/lpt.c to use spllpt() instead of spltty(). It doesn't use
tty structures, and on some machines (namely the DraCo internal lpt, and some
multi-i/o boards for Amigas and DraCos), tying spltty to the pretty high printer
interupt level would hurt serial performance.

On all affected ports but Amiga, spllpt() has been defined in machine/intr.h
to be spltty(), thus preserving old behaviour. Portmasters are encouraged to
change is, if they feel something else is better (e.g., one of its own were
possible).
1998-07-18 21:27:25 +00:00
is 52ac5e203e Precompute lots of bitmasks etc. in serparam(). Results in slightly better
(but I suspect, insignificant) performance, and also prepares for 8bit +
parity support.
1998-07-18 20:19:33 +00:00
mhitch dc9188e3e1 Add UVM support to amiga 1998-07-10 20:23:24 +00:00
is 49ed29ab05 The INTF_RBF bit of INTREQ is mirrored in SERDAT. As we would read this
register anyway when the bit is set, we can safe one of the (slow) custom
chip accesses by using this bit.
Sounds ridiculous, but at a hardware FIFO depth of 1 and ~1 usec per
access (at IPL 5) it might help the highspeed addicts.
1998-07-07 16:46:38 +00:00
jonathan 011f2bda08 defopt NS, NSIP. 1998-07-05 06:49:00 +00:00
jonathan 3751946b97 defopt INET, NETATALK. 1998-07-05 00:51:04 +00:00
jonathan 466e784ee1 defopt DDB. 1998-07-04 22:18:13 +00:00
mhitch 65346d4042 Add memory disk. 1998-07-03 22:24:45 +00:00
is 8a8208f978 Synchronize shadow ciab.pra variable on first open. 1998-06-29 19:31:19 +00:00
is 1bec8366fd Fix a problem with bogus hangups that Thorsten Frueauf has reported. 1998-06-26 17:50:20 +00:00
is 7a0f63f982 Back out the defopt for M680?0. As pointed out to me, this breaks ports which
dont use the M680?0 the way Amiga, Atari, Mac68k, and X68k do. I must have
missed this in the past discussion about this project.
1998-05-24 19:32:34 +00:00
is 6a6812fd92 Move M680[2346]0 to opt_m68kcpu.h.
XXX Some explicit dependencies could be removed now from the individual
arch/$ARCH/conf/Makefile.$ARCH files, but this is still to be done.
1998-05-23 20:51:06 +00:00
veego 8a9498f09a Don't use an 'register char' as an array index, change it to an int. 1998-04-17 17:57:08 +00:00
veego d15b06459b Add missing int after an register. 1998-04-17 17:38:14 +00:00
is 4e23fff56a Make ser.c compile again (preliminary release). It needs still a lot of
cleanup, but at least mainstream usage should be possible again (worked
for me 5 minutes ago).
1998-04-11 19:30:56 +00:00
is da0b5bf913 amiga_ttyspl -> amiga_serialspl (and keep ttyspl constant at 4 again).
(Part of this change slipped in with my last machdep commit; thanks to
Matthias Scheler for pointing this out).
1998-04-11 18:28:33 +00:00
is 6c7f702633 - remove one level of soft interupt in the software autorepeat code
- WOPEN -> wopen
1998-03-25 22:14:13 +00:00
is 6e806b8115 This is no longer DraCo-specific (and hasn't been for a long time). 1998-03-22 17:16:33 +00:00
is 20251e62f9 Bug fix for the Ariadne panic: don't touch addresses outside the buffer we
got passed.
- analysis by Charles Hannum
- bugfix by Michael van Elst
- test by Thorsten Frueauf & Matthias Scheler
1998-03-09 17:00:33 +00:00
is 90e5d61467 Conditionally (on defined(DRACO)) compile new DraCo keyboard code sequences.
Pointed out by Bernd Ernesti.
1998-03-08 19:59:15 +00:00