6db70be120
Rip out all the '-B bootblock' support, everything should use installboot(8).
...
(can only affect arm32, hp300 and vax ports, and doesn't affect sysinst).
2003-11-08 09:25:01 +00:00
0be1698412
Fix byteswapping a direntry. From Wolfgang Solfrank.
2003-11-05 22:27:16 +00:00
8920f41e3e
Bump date for previous.
2003-11-02 09:01:47 +00:00
2c415ee56d
playstation2 needs MBR support in disklabel(8).
2003-11-02 02:52:58 +00:00
f80b4d6ea1
Add a couple little warnings about swapping to RAID 5 sets.
...
(it currently doesn't work.)
2003-11-02 02:20:26 +00:00
e0d8e46808
KNF: sort includes.
2003-11-01 18:42:00 +00:00
a2307c7caf
eg -> e.g., vinum -> Xr vinum 4.
2003-11-01 18:38:59 +00:00
4302f2798d
Use fstat(2) to get the partition size (falling back to the label on old
...
kernels) so that newfs works on vinum (and similar).
Kill the -V hack for vinum.
Don't bother faking up a label for -F and mfs, nothing is needed from it.
Ignore label if special doesn't match DISKPART(sb.st_rdev);
Simplifly logic for default block/frag sizes.
Update man page to match.
WARNS=3.
2003-11-01 17:43:03 +00:00
d20692fdf5
Under no circumstances try to zap an existing superblock at sector 0.
...
There's no reasonable situation where there will be one there, except if the
disk had data on it previously for some reason. It's significantly more
likely (read "the world until UFS2 was merged") that sector 0(..15)
contains really important stuff like boot blocks and disk labels.
Once again, I ask, why wasn't UFS2 implemented as a separate file
system a la lfs & ext2fs ?
It could have shared a chunk of the kernel code (just like those),
and had different userland tools and a different fs_type.
2003-10-29 08:14:13 +00:00
171d653219
Overhaul how `build.sh tools' are used:
...
* Rename "config.h" to "nbtool_config.h" and
HAVE_CONFIG_H to HAVE_NBTOOL_CONFIG_H.
This makes in more obvious in the source when we're using
tools/compat/config.h versus "standard autoconf" config.h
* Consistently move the inclusion of nbtool_config.h to before
<sys/cdefs.h> so that the former can provide __RCSID() (et al),
and there's no need to protect those macros any more.
These changes should make it easier to "tool-ify" a program by adding:
#if HAVE_NBTOOL_CONFIG_H
#include "nbtool_config.h"
#endif
to the top of the source files (for the general case).
2003-10-27 00:12:41 +00:00
6e508d1dff
Remove alpha optimization hack.
2003-10-26 16:30:25 +00:00
f85d2d1c14
Use ${HOST_SH} instead of `sh'.
...
If necessary, pull in <bsd.sys.mk> to get the definition of HOST_SH;
Makefiles that pull in one of (most of) <bsd.*.mk> will get this anyway.
2003-10-26 07:25:33 +00:00
130ab7336b
Rework how MAKEVERBOSE operates:
...
* Don't bother prefixing commands with a line of ${_MKCMD}\
and instead rely upon "make -s". This is less intrusive on
all the Makefiles than the former. Idea from David Laight.
* Rename the variables use to print messages. The scheme now is:
_MKMSG_FOO Run _MKMSG 'foo'
_MKTARGET_FOO Run _MKMSG_FOO ${.TARGET}
From discussion with Alistair Crooks.
2003-10-21 10:01:19 +00:00
dda2494d07
aes-xcbc-mac is now an RFC. bump date.
2003-10-21 07:20:11 +00:00
83c93c70ba
Don't assign NULL to a char.
2003-10-21 02:38:15 +00:00
9c9a4505fe
Don't use NULL as a case value.
2003-10-21 02:34:45 +00:00
954495b615
Don't initialize an int to NULL.
2003-10-21 02:33:34 +00:00
34951ed447
The 3rd argument to swapctl() is an int, don't pass NULL in it.
2003-10-21 02:32:54 +00:00
efbda96887
Don't compare argc to NULL.
2003-10-21 02:31:43 +00:00
d9495c6d9a
Don't compare an integer to NULL.
2003-10-21 02:31:08 +00:00
a8930c059a
Fix various uses of NULL that should have been 0.
2003-10-21 02:30:03 +00:00
bb95bd5936
Handle partition offset and size as unsigned entities.
2003-10-20 13:20:20 +00:00
84a1b52c43
Partition size and offset inside the disklabel are unsigned. Print
...
them as unsigned so that we don't print negative values when we're
halfway through.
2003-10-20 13:10:48 +00:00
e69ce3e4bf
Add a -q (quiet) option to print nothing for clean filesystems.
...
Support in fsck_ffs and stub in fsck_xxx.
Push a few more messages through pwarn() instead of printf() to ensure
disk name is shown.
2003-10-20 12:04:38 +00:00
ddff99b7f4
rework to use the newer _MKMSGCREATE (et al) macros
2003-10-19 04:45:01 +00:00
8564ba3934
support MAKEVERBOSE and use ${HOST_SH}
2003-10-19 01:23:27 +00:00
3f580214e5
Support CCDF_NOLABEL. Document what CCDF_UNIFORM actually does.
2003-10-17 05:23:56 +00:00
33261e069b
Slight option ordering change.
2003-10-15 19:58:24 +00:00
02b24a287f
The 'struct partition *pp' is only used to save the block and fragment
...
sizes (so they can be written back into the disklabel).
Allow pp to be NULL
2003-10-15 13:07:34 +00:00
28fc00d72a
initialize llsize and llsizemult to 0
...
fixes bug noticed by Christopher SEKIYA on tech-kern@
2003-10-15 00:25:28 +00:00
b2b49933f4
Move Matt Green's code from a 4-clause to a 3-clause licence by removing
...
the advertising clause. Diffs provided in PR 22396 by Joel Baker, the changes
were confirmed to the board by Matt Green.
2003-10-13 14:22:20 +00:00
abda32ca8b
Add 'mode' option to change PHY media for 802.11 devices. Also,
...
display PHY mode. E.g., run an 802.11a (5GHz, 54Mbps max) access
point:
> ifconfig ath0 nwid my_access_point mode 11a mediaopt hostap
> ifconfig -m ath0
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
nwid my_access_point
powersave off
bssid 00:05:5d:84:cc:6e chan 3
address: 00:05:5d:84:cc:6e
media: IEEE802.11 autoselect mode 11a hostap
status: active
supported IEEE802.11 media:
media autoselect
media autoselect mediaopt adhoc
media autoselect mediaopt hostap
media autoselect mediaopt monitor
media autoselect mode 11a
media autoselect mode 11a mediaopt adhoc
media autoselect mode 11a mediaopt hostap
media autoselect mode 11a mediaopt monitor
*snip snip*
2003-10-13 08:27:35 +00:00
e347fde976
Bump date for previous; new sentence, new line; use more macros; fix a typo.
2003-10-12 07:21:57 +00:00
e333b0fc0e
Add an explanation of the fundamental purpose of the "security level"
...
mechanism and attempt to explain how to use it effectively.
2003-10-12 04:14:56 +00:00
32d4fce65a
add RCS Ids
2003-10-11 09:55:58 +00:00
2ced7f69cb
fix DPADD
2003-10-11 09:51:49 +00:00
5ffe40db93
Sort sections; bump date to commit date; add NetBSD RCS Id; mention
...
when it appeared in NetBSD in HISTORY section; rename section
"GOTCHAS" to "CAVEATS" since that's our standard name.
2003-10-11 09:12:18 +00:00
7a699e2bed
unconditionally #define DEFAULT_BOOTDIR. should fix non-x86 builds
2003-10-11 04:50:49 +00:00
4669b2abcb
Compensate for 64bit (use %p for pointers).
2003-10-10 21:59:09 +00:00
5a3b01bb60
All single letter options are usually combined; add -V to the others.
2003-10-10 09:03:23 +00:00
e5db3159a8
Sync look of -V description in usage with other option descriptions.
2003-10-10 09:00:24 +00:00
5cfcdccff1
Hook Vinum into build.
2003-10-10 06:10:53 +00:00
d2b25aff9c
bump date for last
2003-10-10 04:14:00 +00:00
c52d09a328
Decribe the V flag.
2003-10-10 03:27:10 +00:00
51b6966ad7
Add -V flag for use with Vinum to indicate that the last character of
...
the device name should not be interpreted as a partition identifier.
2003-10-10 03:23:28 +00:00
d5119a1e37
Initial import of Vinum userland.
...
Ported by: Ramsubramanyam <Ramsubramanyam@infosys.com>,
Atul Kabra <Atul_Kabra@infosys.com>,
Maneesh Jhinger <maneesh_jhinger@infosys.com>
Reviewed by: lukem
2003-10-10 03:13:12 +00:00
4d76d724b9
calculate "-s size" values after sectorsize has been fully determined
...
extend "-s size" argument to allow negative sizes to represent value to
subtract from diskalbel partition size
2003-10-09 16:23:29 +00:00
d59161d069
- don't try to write alt super blocks beyond the end of the partition.
...
- flush stdout when printing each super block addresses.
2003-10-09 14:28:34 +00:00
8612aa8b30
use asprintf David Hill
2003-10-08 20:39:07 +00:00
eb48d1d3cb
plug memory leak. David Hill
2003-10-08 20:36:25 +00:00
dsl