Commit Graph

39 Commits

Author SHA1 Message Date
kleink de328af944 Fix a inverted logic botch introduced in rev. 1.35, typically causing
cb_chipset() to return the wrong chipset type.
2000-05-08 07:31:20 +00:00
haya 7bc5a1ca36 Add CardBus interrupt enable flag. When this flag is asserted, a
CardBus interrupt is routed to the child devices and vice versa.  This
flag is negated when a pccbb receives a suspend or stanby event.
2000-04-06 09:11:57 +00:00
thorpej fc96443d15 New callout mechanism with two major improvements over the old
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
  resource allocation.
- Insertion and removal of callouts is constant time, important as
  this facility is used quite a lot in the kernel.

The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 07:01:25 +00:00
haya ddd36bd41a 1. Do not apply 5 V on a CardBus card.
2. Do not avoid ISA hole when a device requires more than
   256-byte io space.
3. Remove sending CardBus bridge's function number to
   cardbus stack.  This number is not needed for anyone.
2000-03-22 09:35:06 +00:00
enami 60ed7cfb2b Simplify the code a bit. 2000-03-14 10:26:10 +00:00
enami 70b8e188ee Don't think that a card is inserted if there is a card already in the slot.
Note that powerdown hook calls pccbbintr so that it detect card insertion or
removal during suspension.
2000-03-14 10:23:16 +00:00
enami d454505125 Cosmetic change. 2000-03-14 10:20:09 +00:00
enami b3cf850817 Fix typos in comments. 2000-03-14 01:29:30 +00:00
mycroft e750135b5e A few things:
* Initialize PCIC_INTR and PCIC_CSC_INTR on all chips, not just TI.
* Leave card detect interrupts enabled in PCIC_CSC_INTR.  (This requires
  reading PCIC_CSC in the interrupt handler on some chips, so do that too.)
* Leave PCIC_INTR_ENABLE set, as some chips require this to post card detect
  interrupts while in PCMCIA mode.
* Leave PCIC_INTR_RESET (which is inverted) set at all times *except* when
  powering up a socket, as some chips will use it to drive RESET# low even
  while a CardBus card is in the slot.

This makes PCMCIA and CardBus cards works with some TI chips.  Cross-checked
with a Toshiba ToPIC 95B.
2000-03-12 11:31:53 +00:00
mycroft 602faa83a8 Do *not* fiddle with the serial/parallel IRQ mode selection on TI chips.
Without extensive probing, we cannot possibly know that we're doing the right
thing.

Also some stylistic changes.
2000-03-12 04:34:29 +00:00
mycroft c7a13f6116 Revert the previous change. It does not match the commit message *and* was
incomplete (and probably quite broken).
2000-03-12 04:25:57 +00:00
haya 173f823e3a Only apply power on 3.3 V CardBus card (there are no 5 V CardBus card.) 2000-03-10 11:08:49 +00:00
thorpej 285a315e99 Simplify the winlist code. 2000-03-01 23:40:26 +00:00
haya d94804a788 Pccbb maintains the interrupt handlers for 16-bit PC Cards
by itself.
Add some comments.
2000-02-23 07:28:54 +00:00
enami b785bb47a0 Establish a powerhook and make sure the card detect interrupt is enabled
after resume from suspend, as i82365.c does.
This is a workaround for newer Sony VAIO notebook.
Patch is submitted by Atsushi Onoe (onoe@sm.sony.co.jp) in PR#9463.
2000-02-22 02:35:26 +00:00
thorpej 70bbb1b84e Sync PCMCIA memory mapping with a change from rev 1.47 of i82365.c:
always map attr memory 8 bit, since its defined that way. (chopps)
2000-02-21 01:44:36 +00:00
cgd dbeafc9dbe clean up some printfs 2000-02-06 08:14:13 +00:00
chopps 101848d272 run this through indent with some comment cleanup -- more knfing needed. 2000-02-05 18:20:08 +00:00
haya 639bd74d21 Pccbb manages interrupt handlers by itself for its child device. 2000-01-26 09:02:41 +00:00
joda 492bfe70f3 get the device name from pcidevs instead of having a list here 2000-01-25 14:34:24 +00:00
haya dccf05f858 Do pccbb_chipinit() after YENTA register space allocation.
Add TI PCI 1451 PCI-CardBus entry.
2000-01-25 09:36:43 +00:00
chopps b50b01e020 Don't enable the interrupt until after we cycle the power, disable
interrupt at disable, and make this code look more like the std pcic
code.  From Mycroft and I.
2000-01-25 06:16:34 +00:00
joda 7ac1ad97ba The TI 2030 is a PCI-PCI bridge and doesn't belong here 2000-01-24 15:51:59 +00:00
mycroft 901082bf1e Remove code that should not have been added. 2000-01-23 04:02:19 +00:00
augustss 75e8c400fa Add parens so a ?: expression binds correctly. 2000-01-23 00:10:03 +00:00
joda 2367ad5f3d add shutdown hook 2000-01-17 12:57:26 +00:00
joda 87414deb1e remove stale comment 2000-01-13 09:05:41 +00:00
joda 8430609055 (pccbb_pcmcia_do_mem_map): handle 8-bit memory 2000-01-13 09:01:17 +00:00
joda e8937eb4e5 make this slightly more inline with other code; and while at it, fix
some oddities in pccbb_winset
2000-01-13 08:54:20 +00:00
haya 27214a2c93 Add an entry for Toshiba ToPIC100 CardBus-PCI bridge.
Maintainance for 3Com multi-function, 16-bit pcmcia card.
2000-01-12 09:23:26 +00:00
haya 35a9d47da9 Maintanance for Ricoh RL5C475. VAIO 505TX uses this chip. 1999-12-20 08:11:42 +00:00
joda 5527afff97 (pccbb_pci_callback): no point in reading the bus number register
twice
1999-11-15 16:19:03 +00:00
haya 8553661a5e Maintainance the name of Ricoh PCI-CardBus bridges. 1999-11-01 08:58:45 +00:00
augustss 3d0e8ae9dd Make this file compile again by using the same names as in pcidevs. 1999-10-30 16:02:28 +00:00
haya 0263d8db3d Do not stop no matter when pci_mapreg_map fails to map bridge socket
registers.  When it fails, reset Socket Base Address register and map
registers using rbus.
1999-10-27 00:48:36 +00:00
haya 5aa225ed2e Disable legacy io port before the bridge is probed as a pcic on isa.
Comments ware changed to comply the KNF.
Add PCCBB_PCMCIA_16BITONLY to support TI PCI103X series.
1999-10-19 09:29:46 +00:00
augustss c175d023d0 Comment out some debug settings.
Change attach printing so it looks more standard.
1999-10-15 10:59:56 +00:00
haya e5cc414836 add NetBSD ID tag. 1999-10-15 06:42:21 +00:00
haya 4eee111127 This is the first check-in of CardBus driver. CardBus driver contains
CardBus bus stub, YENTA PCI-CardBus bridge (cbb), 3Com 3C575TX driver
(ex) and Intel fxp driver.

TODO:
  o Conform to the KNF more strictly.
  o Be unified with pcmcia code as much as possible.
  o Add more drivers for CardBus card, such as APA-1480 or USB card.

The affected files are listed below.

	sys/arch/i386/conf/files.i386
	sys/arch/macppc/conf/files.macppc
	sys/conf/files
	sys/dev/ic/elinkxl.c
	sys/dev/ic/elinkxlvar.h
	sys/dev/ic/i82365.c
	sys/dev/ic/i82365var.h
	sys/dev/isa/i82365_isasubr.c
	sys/dev/pci/files.pci
	sys/dev/pcmcia/pcmcia.c
	sys/dev/pcmcia/pcmciachip.h

The added files are listed below.

	sys/arch/i386/conf/CARDBUS
	sys/arch/i386/include/rbus_machdep.h
	sys/arch/i386/i386/rbus_machdep.c
	sys/arch/macppc/include/rbus_machdep.h
	sys/arch/macppc/macppc/rbus_machdep.c
	sys/dev/cardbus/if_ex_cardbus.c
	sys/dev/cardbus/Makefile.cardbusdevs
	sys/dev/cardbus/cardbus.c
	sys/dev/cardbus/cardbus_map.c
	sys/dev/cardbus/cardbusdevs
	sys/dev/cardbus/cardbusdevs.h
	sys/dev/cardbus/cardbusdevs_data.h
	sys/dev/cardbus/cardbusvar.h
	sys/dev/cardbus/cardslot.c
	sys/dev/cardbus/cardslotvar.h
	sys/dev/cardbus/devlist2h.awk
	sys/dev/cardbus/files.cardbus
	sys/dev/cardbus/if_fxp_cardbus.c
	sys/dev/cardbus/pccardcis.h
	sys/dev/cardbus/rbus.c
	sys/dev/cardbus/rbus.h
	sys/dev/pci/pccbb.c
	sys/dev/pci/pccbbreg.h
	sys/dev/pci/pccbbvar.h
1999-10-15 06:07:17 +00:00