a44a276543
from jason thorpe: add ccdclose(), make it work with the MI scsi code,
...
and add knowledge of i386 disk device names (XXX).
1995-03-02 06:40:38 +00:00
f694af6712
don't overload buffer structs; allocate and use a 'super-struct' instead.
1995-03-02 06:38:11 +00:00
e3c2563328
Fixup (c)'s and ids.
1995-03-01 11:34:02 +00:00
2ef7b2e7db
new arcnet (2060) device from is@Beverly.Rhein.DE (Ignatios Souvatzis)
1995-02-28 22:03:59 +00:00
63d3904bce
Use irq directly not as a mask
1995-02-28 21:47:42 +00:00
8f6f7fb7c9
use a buf-within-struct to avoid overloading b_pfcent.
1995-02-27 19:31:00 +00:00
48b5b94c4f
fix some typos. from frank@fwi.uva.nl (Frank van der Linden)
1995-02-27 09:10:24 +00:00
2c0f263ee7
use wdc_softc in wdccd, rather than wd_softc; from chuck cranor. (pr 828)
1995-02-27 01:08:01 +00:00
389584724a
Support for uVAXII, new tmscp driver added.
1995-02-23 17:53:16 +00:00
2986fc2fd0
Be less picky about revision numbers for some broken devices.
1995-02-22 19:32:33 +00:00
559df5705c
PSS driver; needs testing with config.new
1995-02-21 04:15:03 +00:00
39b8de8e12
Driver for Windows sound system; not extensively tested
1995-02-21 02:28:42 +00:00
32eec53a2d
SoundBlaster driver for SB, SB16 and SBPRO
1995-02-21 02:28:06 +00:00
a70ae7273c
PAS driver; uses SB emulation for now
1995-02-21 02:27:18 +00:00
977594d1a9
Driver for ad1848 codec
1995-02-21 02:26:39 +00:00
1f5bdc75a9
New audio subsystem
1995-02-21 01:35:58 +00:00
8b834a58ca
Display more information when we get bogus data off the card.
1995-02-19 18:05:45 +00:00
0f894be19c
Rearrange epintr() to insure proper edge-trigger of the interrupt latch.
1995-02-19 06:13:53 +00:00
431121d46f
Fixes for new config.
1995-02-13 00:44:21 +00:00
a36de19f90
Make some guesses about how to properly configure the interrupt masks. Back
...
out part of the previous change until I get some documentation on these boards.
1995-02-10 01:37:57 +00:00
e560d77223
Another Maxtor botch.
1995-02-09 10:23:14 +00:00
e9c2b98c11
Comment a potential bit of lossage.
1995-02-02 21:08:42 +00:00
8abb91e18d
Various:
...
* Make synchronous negotiation work.
* Use the bitbucket when the target requests too much data.
* Loop in aicintr() until we get to a state where we have to wait.
1995-02-01 21:49:37 +00:00
ab5662014f
Correct some more of the synchronous stuff, and omit it completely if
...
AIC_USE_SYNCHRONOUS is 0.
1995-02-01 16:56:42 +00:00
4653b28a42
Various:
...
* Always enable disconnection.
* Add some more per-controller variables: initiator ID, clock frequency,
min and max sync period.
* Correct sync period calculations.
* Remove sc_progress.
* Move most of the reselection handling into a separate function.
* Remove some outdated comments.
* Remove message bytes from FIFO even when dropping them on the floor.
* Some cosmetic cleanup.
1995-02-01 16:11:43 +00:00
16e77e7281
Fix path to if_lereg.h.
1995-02-01 09:54:36 +00:00
d8743f51a2
Add Exabyte 8200 to the list.
1995-02-01 09:37:54 +00:00
c937d3b9f2
Patch from Wolfgang to fix a missing spl.
1995-02-01 09:32:45 +00:00
52bacd79d6
Fix invocation of scsi_scsi_cmd(), per John Kohl.
1995-01-30 15:54:42 +00:00
1076165d07
All revisions of the TDC 3600 are rogues.
1995-01-30 15:39:33 +00:00
7639253b70
Finish last change.
1995-01-30 11:50:23 +00:00
321b00bd07
Some drives don't grok START with LoEj=1, either.
1995-01-30 11:47:56 +00:00
0ece1143f6
Set the LoadEject bit when issuing a START.
1995-01-30 11:37:17 +00:00
9085638020
Some devices really do require the START before the PREVENT. This makes no
...
sense.
1995-01-30 11:34:25 +00:00
3a7bbb1acd
lip service to making ISA support machine-independent. This is the first
...
round: moving the drivers into a machine-independent directory.
Some drivers (e.g. fd.c) not moved because they use other pc features (e.g.
CMOS settings), and none of the non-driver files moved, because they're
still pretty much PC specific. eventually (when other ports with ISA
busses really start using this code), more 'high-level' ISA support will
live here.
1995-01-29 07:36:54 +00:00
f11e7e33fe
use chip headers in /dev/ic
1995-01-29 02:58:20 +00:00
87ed227cb4
include files from the correct places.
1995-01-27 05:44:29 +00:00
1611df6ae0
Update copyrights.
1995-01-26 12:05:49 +00:00
b76a328caa
Redo the `wait for spin up' code. The Mach 3 method clearly doesn't work.
...
Also, rearrange the first open sequences a bit; SDEV_OPEN is no longer magic.
1995-01-26 11:56:51 +00:00
c5d5ca8150
Don't check the control port at all; too unreliable.
1995-01-26 07:35:49 +00:00
c0e2bd26f1
Initialize the new xmit state correctly. From Rafal Boni.
1995-01-26 04:13:23 +00:00
95afef4f1d
kill _PATH_VNTAB; it's no longer used by anything.
1995-01-25 04:46:30 +00:00
66785ec427
Clean up deleted files.
1995-01-25 04:45:41 +00:00
d9f7c9f9be
vn -> vnd renaming, for consistency
1995-01-25 04:45:38 +00:00
726fa4e94f
Do the PREVENT before the START.
1995-01-23 18:17:22 +00:00
feb5b29596
Remove old, misleading comment.
1995-01-23 17:56:26 +00:00
57f2c598c7
Various changes from Rafal Boni to improve performance and reliability. Also,
...
clean up the formatting a little more.
1995-01-23 04:50:08 +00:00
01ce8db055
Fix the problem with identifying cards on warm boot. Partly from Greg Hudson.
1995-01-22 07:37:28 +00:00
3dddacd1ce
Rearrange tests so `offline' has higher priority than `out of paper'.
1995-01-22 00:12:39 +00:00
68c1a35cd9
Initialize host_stat and target_stat properly.
1995-01-18 04:20:16 +00:00
cgd