45ece248c0
Add an Abocom adapter.
2001-07-04 16:38:09 +00:00
f71391cb6c
Move the check for successful attachment to earlier in the detach
...
routine, to avoid referencing nonexistent data structures.
2001-06-15 18:05:36 +00:00
85fb541842
Fix typo; print sc->aue_intr_errs instead of sc->aue_rx_errs when
...
reporting interrupt errors.
2001-06-07 10:55:15 +00:00
cbcea5e84c
Do mii frobbing in process context.
...
Now we can finally get rid of the evil USBD_NO_TSLEEP hack in the aue driver.
2001-04-13 11:17:11 +00:00
0207e2ea75
Comment out some strange code.
2001-03-25 22:59:43 +00:00
2c218a4926
Handle allmulti case correctly as a NetBSD network driver;
...
if we are requested range of multicast address or too many multicast address,
program multicast filter to receive all multicast address. And set/clear
IFF_ALLMULTI flag properly.
2001-01-29 01:24:42 +00:00
dfa2282053
Change watchdog routine. (From FreeBSD.)
...
The only thing stopping us from getting totally rid of the evil
USBD_NO_TSLEEP hack is the (broken) assumption in the MII driver that
registers can be read and written without a process context.
2001-01-21 19:42:29 +00:00
2a7443922d
Get rid of `#ifdef FreeBSD'; they maintain their own version.
2001-01-21 19:36:31 +00:00
34c8ae80da
constify
2001-01-18 20:28:15 +00:00
71cbcad899
ALTQ'ify.
2000-12-14 07:51:36 +00:00
4df48420a1
Another Ethernet device. From nagae@tk.airnet.ne.jp in PR kern/11711.
2000-12-13 02:49:22 +00:00
b84f740be0
Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach().
2000-11-15 01:02:11 +00:00
94e36acb29
Tell usbd_set_config_no() to be verbose. It's nice to know whyit fails.
2000-10-24 14:53:59 +00:00
0b0fb8e466
Add Kingston KNU101TX Ethernet adapter.
2000-10-12 22:51:20 +00:00
447c19ac22
Add another DLINK adapter.
2000-10-08 21:26:26 +00:00
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
3486500f77
repair multicast filter setup. PR 11037 from Ryoji Kato.
2000-09-20 01:26:14 +00:00
ed9486e158
Bring the coding style into the 80s, i.e., get rid of __P and use
...
ANSI prototypes and declarations.
2000-06-01 14:28:57 +00:00
26f708a5a3
Handle the Linksys USB100H1 like the other Linksys adapters.
...
Restructure the code a little.
2000-05-06 20:38:59 +00:00
13d8353ffc
Add Linksys USB100H1, an Ethernet and HomePNA adapter.
2000-05-06 18:28:01 +00:00
23f3c0074f
Sync with FreeBSD: add two more adapters.
2000-04-23 19:03:45 +00:00
a94b555441
Put a ratecheck on error messages from the interrupt pipe.
2000-04-04 20:16:19 +00:00
0a425e1f3d
Generate an error message if starting a transfer fails.
2000-04-02 21:25:41 +00:00
dd7160dcba
Afew more OpenBSD portability fixes.
2000-03-30 00:18:17 +00:00
a25e27e1eb
Some OpenBSD portability fixes.
2000-03-29 18:24:52 +00:00
fc72e72d7d
Change (almost) all static to Static. The symbol `Static' can then be defined
...
to `' or `static' depending on if you want to debug or not.
2000-03-27 12:33:53 +00:00
0069eba19b
Some cleanup and renaming of the callouts used in USB drivers.
2000-03-24 22:03:28 +00:00
fc96443d15
New callout mechanism with two major improvements over the old
...
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 07:01:25 +00:00
348fff03fb
add I/O DATA USB-ET/TX USB ethernet adapter.
2000-03-16 18:27:21 +00:00
b8b53d87db
Avoid accessing the device if it is dying.
2000-03-12 21:57:50 +00:00
45f32a77f5
Clean up code a little and add some more debug messages.
2000-03-08 15:33:24 +00:00
a6f861574a
No longer necessary to futz with ifp->if_baudrate here.
2000-03-06 21:02:00 +00:00
e0cb11e30e
Use macros from usb.h instead masking out bit explicitely.
2000-03-06 20:58:18 +00:00
d6c4ac7ff2
Use ratecheck() to limit error messages on disconnect.
...
Break out some common functionality.
2000-03-02 12:37:50 +00:00
3218dd992d
Protect the use of bpf_mtap so bpf isn't needed.
...
aue: Limit the number of error messages at disconnect by using ratecheck().
2000-03-01 19:00:51 +00:00
6fa8665eeb
Handle detach that happens before attach has finished. (Reported by mycroft.)
2000-02-17 18:42:21 +00:00
f7ad1af2b5
Use bpf_mtap() correctly.
2000-02-17 05:41:41 +00:00
a79d73d045
Add Corega FEther adapter. From PR 9394.
2000-02-12 15:02:21 +00:00
de5a3532be
Fiddle with some PHY bits on the D-Link adapter as well. From FreeBSD.
2000-02-02 20:06:55 +00:00
eed75dbc26
Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
...
flags down from the parent to child vi mii_attach().
2000-02-02 17:09:38 +00:00
aae9ac7e11
Generate usb events on attach and detach.
...
Handle rnd stuff correctly.
2000-02-02 13:19:44 +00:00
b10d6a6fc0
Support detach.
2000-02-02 11:42:29 +00:00
84dc99fdea
Bring some order to the chaos which was the MII code function naming
...
"conventions".
2000-02-02 08:05:26 +00:00
8cc78f4f7d
Small restructuring: break out opening of pipes into its own function.
2000-01-28 00:51:25 +00:00
9cd4bf4652
Remove the hack that handled truncated transfers.
2000-01-28 00:29:53 +00:00
8d1b47c24d
Poll the interrupt pipe every 100 ms instead of every 1 ms. The interrupt
...
pipe is only used to collect statistics so it seems rather stupid to bog
down the processor by doing this every ms.
2000-01-19 00:25:23 +00:00
4357bf2625
Pretend we can detach. Then we can at least the detach the device
...
if the attach fails in the middle.
2000-01-18 19:46:55 +00:00
3205164ec5
Add missing USBD_NO_COPY flag.
2000-01-17 13:23:05 +00:00
60e70258d2
Compute packet length correctly (from FreeBSD).
2000-01-17 02:20:43 +00:00
2ec318c2e5
Update some comments.
2000-01-16 23:18:56 +00:00
augustss