bee33e3d00
repair scoped address handling in PRU_BIND. sync with kame.
2001-07-23 19:29:53 +00:00
a9356936b4
seperate -> separate
2001-07-22 13:33:58 +00:00
7f070caa75
sync rt_ifp check with IPv4 counterpart (see sys/net/if_ethersubr.c 1.27).
...
sync with kame
2001-07-20 20:26:35 +00:00
8c9f492242
do not malloc() during interrupt context for IPv6 multicast kludge table.
...
malloc() during interface initialization. sync with kame
2001-07-18 13:12:27 +00:00
fc35f336c7
sync with draft-ietf-ipngwg-p2p-pingpong-00.txt. apply special behavior
...
only if ip6_dst is "neighbor" within p2p prefix. sync with kame
2001-07-18 09:24:26 +00:00
5e920039c6
have ovbcopy() macro, for cross-BSD compatibility only.
2001-07-07 14:45:46 +00:00
193167b1eb
call in{,6}_pcbpurgeif0() before in{,6}_purgeif().
2001-07-03 08:06:19 +00:00
1ff38f4d03
on interface removal, remove multicast groups joined from pcb, before
...
removing interface addresses. without the change, we may deref
NULL pointer in in_pcbpurgeif(). from jinmei@kame, sync with kame
2001-07-02 15:25:34 +00:00
03927c60a5
call defrouter_select() only if it is autoconfigured host.
2001-06-29 16:01:47 +00:00
02c94ca414
refresh default router list on nd6_detach(), only if we are an
...
autoconfigured host. bug was that, we will lose default route on
"ifconfig gif0 destroy" even if default is not pointing to gif0.
reported by ume@mahoroba.org . sync with kame
2001-06-27 17:36:14 +00:00
9ccf08b3c5
netbsd; on interface removal, force pcbs to leave from multicast groups
...
pointing toward the interface about to be removed. sync with kame
XXX still need more discussions on semantics. the behavior should be safer
2001-06-27 15:53:14 +00:00
77a4124f7d
the documents are out of sync with the latest situation. remove them.
2001-06-24 19:40:35 +00:00
885b74c2be
select default router again, when L2 address of the router changes
2001-06-22 13:36:12 +00:00
0213b76857
remove RFC1885 compatibility code in #ifdef COMPAT_RFC1885, for icmp6
...
reply packet size consideration (obsolete, not used for a long time).
sync with kame
2001-06-22 13:01:49 +00:00
57d1913ebc
do not forward packet back to point-to-point interface, if the packet
...
matches the ipv6 prefix assigned to the p2p interface (= redirect case).
this leads to pingpong, chews bandwidth. bad thing is that bad guy from
remote can chew bandwidth. (follows upcoming internet draft)
2001-06-22 12:33:05 +00:00
ccfe29f3cf
Symmetric has one s and two m's.
2001-06-18 11:23:00 +00:00
5571e920d6
senderr needs only be declared when PFIL_HOOKS is defined
2001-06-12 17:55:52 +00:00
bdbfdf946d
run pfil_hooks for IPv6 forwarding path (note: ip6_forward() does not
...
call ip6_output()).
2001-06-12 15:12:33 +00:00
8b646a5273
remove IPV6FIREWALL case, which is never used
2001-06-11 13:49:18 +00:00
40ac848024
Fix various misspellings of compatible/compatibility.
2001-06-11 01:50:48 +00:00
6a536c0364
fix a IPNOPRIVPORTS unused variable botch. noted by proff.
2001-06-06 06:07:06 +00:00
ad9d3794b0
Implement support for IP/TCP/UDP checksum offloading provided by
...
network interfaces. This works by pre-computing the pseudo-header
checksum and caching it, delaying the actual checksum to ip_output()
if the hardware cannot perform the sum for us. In-bound checksums
can either be fully-checked by hardware, or summed up for final
verification by software. This method was modeled after how this
is done in FreeBSD, although the code is significantly different in
most places.
We don't delay checksums for IPv6/TCP, but we do take advantage of the
cached pseudo-header checksum.
Note: hardware-assisted checksumming defaults to "off". It is
enabled with ifconfig(8). See the manual page for details.
Implement hardware-assisted checksumming on the DP83820 Gigabit Ethernet,
3c90xB/3c90xC 10/100 Ethernet, and Alteon Tigon/Tigon2 Gigabit Ethernet.
2001-06-02 16:17:09 +00:00
781f6920ab
use default hoplimit when incoming interface is not given to icmp6_reflect.
...
sync with kame
2001-06-01 05:54:19 +00:00
67afbd6270
use _KERNEL_OPT
2001-05-30 11:57:16 +00:00
c973d6a0eb
Skip the pseudo-header if nxt == 0. This is already documented
...
in in6_cksum(9) and is also the behavior of the i386 optimized
version.
2001-05-30 03:06:56 +00:00
e91c2ce847
remove debug printfs, which can be too noisy. sync with kame.
2001-05-27 17:36:07 +00:00
fc644273cd
print more diag message on in6_addmulti() failures.
2001-05-24 08:17:22 +00:00
a7596d1912
call icmp6_mtudisc_update(foo, 0) even if ICMPv6 messages are very short.
...
let icmp6 layer decide whether we take PMTUD routes or not.
2001-05-24 07:22:27 +00:00
fc66251bda
plug memory leak on invalid fragment packet. supress noisy log. from kame
2001-05-17 14:01:37 +00:00
498fdebcd7
drop multi destination mode (IFF_LINK0).
2001-05-14 13:35:20 +00:00
f4d5905544
there's no need to #if NFAITH here. IN6P_FAITH can be set even on
...
NFAITH == 0 kernel, it is safer to always check the condition.
sync with kame.
2001-05-11 18:38:03 +00:00
63181d71c1
correct ecn consideration on tunnel encap/decap. sync with kame.
2001-05-10 01:37:42 +00:00
1bec764d78
correct faith prefix determination. use sys/netinet/if_faith.c:faithprefix()
...
to determine. sync with kame.
(without this change, non-faith socket may mistakenly accept for-faith traffic)
2001-05-08 10:15:13 +00:00
d1b6307b88
do not copy TTL field on ipsec tunnel mode encapsulation. sync with kame
2001-04-15 01:55:49 +00:00
bf2dcec4f5
Remove the use of splimp() from the NetBSD kernel. splnet()
...
and only splnet() is allowed for the protection of data structures
used by network devices.
2001-04-13 23:29:55 +00:00
f4e4c674a7
disallow userland programs from specifying addresses with IPV6_PKTINFO
...
setsockopt, if:
- the address is not verified by DAD (= not ready)
- the address is an anycast address (= not permitted as source)
sync with kame
2001-04-11 04:57:53 +00:00
5ed8fd262b
suppress RS/RA log messages (can be re-enabled by net.inet6.icmp6.nd6_debug),
...
as they may fill up /var. sync with kame.
2001-04-04 06:28:41 +00:00
2abaa8eae5
make sure rcvif is sane on call to icmp6_reflect
2001-04-04 06:28:40 +00:00
92969654c0
enable FAKE_LOOPBACK_IF case by default.
...
now traffic on loopback interface will be presented to bpf as normal wire
format packet (without KAME scopeid in s6_addr16[1]).
fix KAME PR 250 (host mistakenly accepts packets to fe80::x%lo0).
sync with kame.
2001-03-30 11:08:56 +00:00
dbcd4b8d03
fix constness of IN6_{IS,ARE}_xx with RFC2553. sync with kame.
2001-03-30 05:53:52 +00:00
2fb1887b31
re-initialize mopt in ip6_insert_jumboopt(). sync with kame
...
From: csapuntz@stanford.edu
2001-03-25 09:58:43 +00:00
0c8d8ae7a0
couple of missing splx. sync with kame.
...
From: csapuntz@play-doh.stanford.edu (Constantine Sapuntzakis)
2001-03-25 09:06:03 +00:00
3e898c9239
in nd6_cache_lladdr(), set nd6_gctimer to ln_expire just after the state
...
transition to STALE. fixes tahi test breakage. sync with kame.
2001-03-21 21:56:29 +00:00
20fe4e2d96
Add a protosw flag, PR_ABRTACPTDIS (Abort on Accept of Disconnected
...
Socket), and add it to the protocols that use that behavior (all
PR_LISTEN protocols except for PF_LOCAL stream sockets).
2001-03-21 19:22:27 +00:00
4ce63adb1e
do not inject packets to ipfilter, if the packet went through IPsec tunnel.
...
http://www.netbsd.org/Documentation/network/ipsec/#ipf-interaction
2001-03-21 19:12:56 +00:00
93b8b31feb
set rmx_mtu to L2 interface mtu, instead of 0, on mtudisc timeout.
...
ip6_output() change is for safety. sync with kame
2001-03-21 07:52:13 +00:00
e4ecd03f2a
drop packets with link-local addresses,
...
if (internally-used) interface ID portion is already filled. sync with kame
2001-03-16 12:22:34 +00:00
27a0af5865
nd6_storelladdr() was not consistent about m_freem() policy.
...
do not touch RTF_STATIC entries (static ND entries) on ND cache update.
couple of costmetic sync. sync with kame
2001-03-08 10:49:32 +00:00
7695280d34
more missing splx. from kame
2001-03-08 10:48:40 +00:00
912f42ecda
remove bogus rtfree. sync with kame. inspired by openbsd PR 1706.
2001-03-08 00:19:03 +00:00
itojun