2d27a472c9
Add some casts to u_char to get vis working again for characters > 0177
...
in VIS_OCTAL mode. Also, change the mask for the most significant tribble
to 03.
Reviewed by christos.
Fixes PR 8802.
1999-11-17 15:52:13 +00:00
eac5784583
Move signal management code common to all PowerPC platforms (sendsig(),
...
sigreturn(), sigcode) to a single place in the shared powerpc directory.
(The struct sigcontext etc. definitions were already being shared.)
1999-11-17 14:56:10 +00:00
c76614ee74
One more pmap_enter() catch-up.
1999-11-17 14:48:43 +00:00
b4c9eea282
Add newline in debug printf.
1999-11-17 12:34:52 +00:00
0616ece265
add "sh3"
1999-11-17 09:59:09 +00:00
ba7e45647d
Initialize buffer dependencies list for soft updates when initializing
...
a new buffer.
1999-11-17 09:34:03 +00:00
ce25407921
Make this a lot more like the PCI front-end.
1999-11-17 08:49:16 +00:00
e69f5159aa
fix a problem in previous: avoid using shadow variable names.
1999-11-17 08:43:53 +00:00
f361f1b1b8
Also disable EX_CONF_INTPHY on the B model.
1999-11-17 08:42:06 +00:00
5bd0644a68
Make the MII code match the `ep' driver's (*again*).
1999-11-17 08:03:30 +00:00
e1a760a4a7
The 3c575-TX does *not* have an internal PHY.
1999-11-17 07:59:57 +00:00
3f761bc3a7
Enable PCI bus renumbering, and add some CardBus Ethernet cards.
1999-11-17 07:34:48 +00:00
11d76dfece
Add PCI bus renumbering code.
1999-11-17 07:34:15 +00:00
0d79886ad5
Fix up the PCI bus numbering after fixing up interrupts.
1999-11-17 07:33:41 +00:00
f4b4d4508a
Code from UCHIYAMA Yasushi's PCI BIOS patches to renumber the PCI
...
busses.
1999-11-17 07:32:58 +00:00
7fa6c707d3
update a prototype for the new pmap_enter().
1999-11-17 06:16:49 +00:00
b2557d295c
add:
...
#options SOFTDEP # FFS soft updates support.
1999-11-17 03:56:38 +00:00
fca16d1571
Move the "Attach the interface" section after printing the mac address
...
and buffer sizes. Stops the ipv6 attach info from messing up the
other driver info.
1999-11-17 03:42:24 +00:00
8bcd9ac481
Consistent panic messages when erroneous kernel configurations are found.
1999-11-17 03:42:20 +00:00
37cdd0b801
simply the conditional for ld.
1999-11-17 02:52:29 +00:00
559f1ca662
re-generating isapnpdevs.c isapnpdevs.h
1999-11-17 02:03:10 +00:00
92fcbce96b
Add my laptop's configuration file as an example.
1999-11-17 01:24:49 +00:00
ad161afb12
Add glue for BIOS32 and PCI BIOS.
1999-11-17 01:22:29 +00:00
4bfa60e3d3
Initialize BIOS32 and PCI BIOS as appropriate.
1999-11-17 01:22:09 +00:00
d6d9fbe240
Interrupt router drivers from UCHIYAMA Yasushi's PCI BIOS patches,
...
cleaned up and reworked a bit be me.
1999-11-17 01:21:20 +00:00
2026e5f71b
PCI interrupt routing fixup code, from UCHIYAMA Yasushi's PCI BIOS
...
patches, cleaned up and heavily reworked by me. Basic algorithm is
the same, although the code structure is now quite different.
Main differences:
- Initialization path is totally different.
- We use the `compat router' information, if present, to determine which
PCI ICU driver we should use.
- Fixup configuration headers on devices not on bus 0.
1999-11-17 01:20:38 +00:00
e589155692
Remove some minor stuff that wasn't right, and wasn't even really used.
1999-11-17 01:16:37 +00:00
e345f0f17c
Basic interface to the PCI BIOS and PCI Interrupt Routing table, separated
...
out from UCHIYAMA Yasushi's PCI BIOS patches, and fairly heavily reworked
by me.
Main differences:
- Only use the PCI BIOS to get the config mechanism and interrupt routing
info for now. No need to use the BIOS for PCI config access right now,
since the old mechanism works fine, and this keeps the code smaller.
- PCI BIOS initialization code path is much different.
- Always use the $PIR table if it exists, and only fallback to the
PCI BIOS 2.1 GetInterruptRouting call if it's not there.
This module does not include any of the fixup code; that is coming
in separate commits.
1999-11-17 01:16:36 +00:00
4a98f5856e
Basic interface to BIOS32. Separated from UCHIYAMA Yasushi's PCI BIOS
...
patches and cleaned up a bit.
1999-11-17 00:55:50 +00:00
f6bf35c814
fix lp64 lossage.
1999-11-17 00:29:54 +00:00
dab18ce266
A file which escaped from 11/15 jombo commit work.
1999-11-17 00:10:00 +00:00
ef8e85f177
Regen.
1999-11-17 00:09:48 +00:00
62058f9f6b
Add the SBLive! joystick device.
1999-11-17 00:09:17 +00:00
d37a1f8e3b
Implement OSS_SOUND_MIXER_INFO.
1999-11-17 00:06:38 +00:00
41a71bdc48
Implement SOUND_MIXER_INFO.
1999-11-16 23:56:41 +00:00
99564313c8
Import tzdata1999j.
1999-11-16 22:43:06 +00:00
e092d92063
Merge tzcode1999i.
1999-11-16 22:41:02 +00:00
ffb29861c2
Add a few more diagnostics.
1999-11-16 22:19:03 +00:00
70ad5362d4
Fix a pointer test that I got wrong in the big code cleanup.
1999-11-16 22:15:50 +00:00
a8bbeb8a4b
Add under which conditions the "read" builtin returns success/failure.
...
Suggested in PR 8813 by Eric Mumpower <nocturne@arepa.com>
1999-11-16 22:03:25 +00:00
a7c74fb98f
Re-add stub Qlogic F/W files so that life is easier when/if the new
...
Qlogic F/W copyright is approved.
1999-11-16 18:48:40 +00:00
8cf9a14802
Add in a step to actually probe for MCPCIAs. This allows us to run on
...
4100s that only have two of four possible MCPCIAs.
1999-11-16 18:37:24 +00:00
2981278f40
Add in a define for a MCPCIA bridge register that would be suitable for
...
probing for with badaddr(9).
1999-11-16 18:36:27 +00:00
ce28c5e558
Make sure a MCPCIA exists before trying to initialize it. Also make
...
sure a MCPCIA softc exists before trying to do post-config cleanup
on it.
1999-11-16 18:33:11 +00:00
87bb3a7b2b
make this work again with -mrtd.
1999-11-16 18:16:53 +00:00
0e549049f7
Correct wargames quote, and while we are here be a little more selective
...
when checking if a game is valid (eg: '../../bin/csh')
1999-11-16 17:27:14 +00:00
653c374a4c
Add "AKA".
1999-11-16 13:23:47 +00:00
e6896dc7c0
Add missing "\" in two line shell command.
1999-11-16 13:15:09 +00:00
75a2e0ef92
Typos.
1999-11-16 12:42:17 +00:00
0a4858667a
Include sys/device.h so that this file compiles again; file dev/tc/tcvar.h
...
now contains the definition of tc_softc.
1999-11-16 12:26:42 +00:00
wennmach