415248a4f2
Move the machdep_start() code into machdep.c. No need for different
...
versions of this function anymore, now that we have a sane kernel setroot().
1996-10-14 07:33:43 +00:00
18c2b0460a
Garbage collect some hackish code that was needed when we had a lame
...
kernel setroot(). The device type for network boot is set like any
other device now. Also, call the punit entry point for device drivers
to properly set `bootdev'.
1996-10-14 07:31:47 +00:00
9ff0348a49
Implement ctpunit(), a "set physical unit" entry point.
1996-10-14 07:29:57 +00:00
9d51a5dcf7
Add a standalone driver entry point that sets the physical unit (HP-IB's
...
equivalent of a LUN) in `bootdev'. This is needed to properly detect the
boot device if booted from the tape unit of an HP-IB disk/tape combo.
1996-10-14 07:29:15 +00:00
84da57f13b
Clean up the code that sets `bootdev' based on information provided
...
by the BOOTROM. Also, give network devices the attention they deserve.
1996-10-14 07:26:06 +00:00
24d2e8ec5f
Sanity sweep.
1996-10-07 04:45:41 +00:00
a2f9031d2f
Add support for copying the miniroot from HP-IB cartridge tape.
1996-10-07 04:45:10 +00:00
bc504916f3
Garbage-collect some sun3-specific stuff, add some debugging code,
...
and KNF.
1996-10-06 19:07:53 +00:00
61a0ffca58
Fixup (unused) netstrategy() routine's calling convention (just returns
...
EIO). Garbage collect unused netioctl() - conf.c redirects netioctl()
to noioctl().
1996-10-06 19:07:00 +00:00
a3c29be5e0
Fixup ctstrategy() calling convention. The standalone ct driver
...
works again.
1996-10-06 19:05:27 +00:00
6ea58d5fae
Serial console changes:
...
* Enable FIFO with trigger level 1.
* Set DTR and RTS so terminals are happy.
* Do not set IEN.
1996-10-06 01:42:45 +00:00
eae3f0bb96
When opening a disk for non-filesystem i/o, make sure we only return
...
an error condition when an error occurs.
Bug noticed by Terry Lambert <terry@lambert.org>.
1996-09-11 18:05:02 +00:00
180c16eff6
Oops, forgot this required change in previous commit.
1996-06-26 18:11:24 +00:00
fc699e8440
Major revamp of the boot code.
...
- Good bye SYS_PBOOT and SYS_NBOOT, hello SYS_UBOOT (unified boot)
Currently supports booting from SCSI and HP-IB disk and network
from a single boot block. Infrastructure for booting from
HP-IB tape is there, but it doesn't quite work yet.
- Add a slightly modified version of Gordon Ross's "rawfs",
which provides a filesystem-like interface to tape devices.
Still needs debugging (see above).
- Rename sys_inst.c to inst.c, so that the LIF directory entry
turns out right (used to look like SYS_SYS_I if loaded from
tape).
- Add a "netio_ask" hint to netio.c, so that a special instnetio.o
doesn't have to be compiled for SYS_INST. Defaults to using
bootparams, but if set, will prompt user for information
usually obtained from bootparams.
- General cleanup.
1996-06-26 17:44:21 +00:00
570949e0e4
Catch up with ITE data structure changes.
1996-03-03 04:23:33 +00:00
f08c9ffa5a
make this compile again, since CONUNIT is no longer defined for us.
...
per Jason.
1996-02-27 22:11:44 +00:00
cf93780656
Adjust for the new console code; CONSCODE is now a kernel option, not
...
a dca-specific constant. For now, hardwire standalone DCA console
at select code 9 (which is what the old constant expanded to). Really
should make the way the bootblock console is probed look just like how
the kernel console is probed.
1996-02-26 21:51:25 +00:00
90a0b784de
Build memcpy.c
1996-01-30 19:47:32 +00:00
abe8231c4f
Catch up with changes to libsa.
1996-01-30 19:09:09 +00:00
1eff435896
Use ${BINOWN} and ${BINGRP} per Arne H. Juul <arnej@ikke.idt.unit.no>
...
in PR #705 . Also, clean up some stuff left over from HP-BSD.
1996-01-15 01:41:37 +00:00
e7cf87f5dc
Add the last revision previous to the switch to the MI LANCE code of
...
hp300/dev/if_lereg.h to the standalone code; the standalone LANCE driver
for the hp300 needs it.
1996-01-01 18:10:54 +00:00
62150b43b1
Truncate the incoming packet if it doesn't fit into the buffer.
1995-10-19 18:43:27 +00:00
b675177228
Put new-style RCS ids in the startup banner. Makes bootblock revisions
...
much easier to recognize; old method could have revision corrupted by
local RCS control.
1995-10-04 07:24:31 +00:00
d08330454a
Determine the select code of the console device, or -1 for internal grf.
...
Pass this value to the kernel in register d5. This value isn't currently
used by the kernel, but will be in the future.
1995-10-04 06:54:42 +00:00
3810bc32eb
Compile the system installation program and install it in /usr/mdec/rbootd
...
as SYS_INST.
1995-09-23 17:40:54 +00:00
a8c323442d
Add a standalone system installation program. Currently implements:
...
* Prompt user for disklabel information and label disk.
* Copy miniroot image from NFS server to `b' partition.
* Boot kernel in miniroot image into single-user mode.
Hooks for tape support are there, but the meat for that isn't implemented yet.
1995-09-23 17:38:51 +00:00
a35f639de0
If compiled for the system installation program, prompt for myip, gateip,
...
netmask, serverip, and path rather than using rarp/bootparam.
Catch up with libsa changes.
1995-09-23 17:31:10 +00:00
d429f2e11f
Re-arrange a mite; for the system installation program. Catch up with libsa
...
changes.
1995-09-23 17:28:11 +00:00
188f6e6912
Add *close() routines. Basically, zaps softc structure so that partition
...
information will be re-loaded upon next open.
Catch up with libsa changes.
1995-09-23 17:19:58 +00:00
b8e9fb1b0b
Catch up with libsa changes.
1995-09-23 17:17:03 +00:00
f47d026fb3
Fix cosmetic typo in kernel name prompt.
1995-09-13 18:52:39 +00:00
231db77094
Fix thinko in netboot-related changes.
1995-09-02 23:36:09 +00:00
acdc651ece
Add support for network booting; uses the following procedure:
...
rbootd->rarp->bootparam->nfs
Add "reset" option to disk and network boot prompts to reload boot code.
1995-09-02 05:04:14 +00:00
b56fc99724
Catch up with an include file change I missed before.
1995-08-05 16:47:34 +00:00
4313e3aa62
Make the boot blocks compile (and work!) again.
1995-08-04 07:55:34 +00:00
f96a1945c5
Remove `nboot' completely.
1995-02-21 09:16:34 +00:00
85eb2facec
Use the libsa exec().
1995-02-21 09:06:13 +00:00
28983f9e3f
Tweak to make the twiddler look better.
1995-02-21 06:39:01 +00:00
e9685fc52f
Don't define netif_debug here.
1995-02-20 00:19:43 +00:00
30b00f8878
Slight rearrangement.
1995-02-20 00:15:06 +00:00
19a789aae8
Update to the new RCS id convention.
1995-02-20 00:12:09 +00:00
6cd040ac12
Don't stall if we get packets back-to-back.
1995-02-19 23:54:18 +00:00
388209113e
Don't panic if the battery is dead.
1995-02-19 23:53:19 +00:00
2fd9d0abfb
Add unfinished netboot code, and reorganize the Makefile somewhat.
1995-02-19 19:17:01 +00:00
132b41434c
new RCS ID format.
1994-10-26 07:22:45 +00:00
9b9fa4f2a0
Fix misguided attempt to reorganize bootdev, and fix a few
...
other miscellaneous bugs and nits.
1994-09-19 00:23:36 +00:00
dd945bf3c1
Don't echo here
1994-08-22 21:41:23 +00:00
901e645db3
Do echo here just like libsa::gets()
1994-08-22 21:41:07 +00:00
8f2482ff3d
Fix `make depend' error.
1994-08-15 06:42:04 +00:00
eade2eabf4
Clean up deleted files.
1994-08-05 23:16:10 +00:00
62a05786ea
Use installboot.sh from 4.4 instead of installboot.c
1994-08-04 19:42:16 +00:00
3451593ece
Dorothy, I don't think we're in Utah any more...
1994-07-18 06:27:12 +00:00
73485a0035
Why was DESTDIR= here? From Dave Carrel <carrel@cisco.com
1994-06-27 04:00:52 +00:00
b0327583a8
Update an #include.
1994-06-22 03:12:23 +00:00
48fb64c3f7
hp300/stand stuff from Lite. We can boot hp4xx series nodes now!
1994-06-19 01:49:49 +00:00
3d090222c3
Fix for disk (and tape) units > 0
1994-03-09 20:17:38 +00:00
81058be6b3
fix up some #include's.
1994-02-19 17:55:12 +00:00
f2d8e8807d
Add a missing ${.CURDIR}.
1994-01-30 20:02:56 +00:00
fe65a36342
.PATH in ${S}/stand
1994-01-26 04:17:23 +00:00
11af788baa
Clean up deleted files.
1994-01-26 02:39:06 +00:00
b001602018
hp300 stanealone bootstrap program ported to use CMU libsa
1994-01-26 02:38:16 +00:00
0b3f240c49
Ditto.
1993-09-02 19:05:40 +00:00
4862b84c92
Add RCS identifiers (this time on the correct side of the branch), and
...
incorporate recent changes in netbsd-0-9 branch.
1993-08-01 19:22:24 +00:00
690cae8181
Add RCS indentifiers.
1993-07-31 15:17:49 +00:00
30177b538f
add rcsids to everything and clean up headers
1993-05-22 07:56:12 +00:00
6dedb5151c
add hp300 kernel files. generic kernel files might need some help...
1993-05-13 13:56:20 +00:00
thorpej