mrouted will periodically age its neighbors and will remove a neighbor
if it hasn't heard from it for NEIGHBOR_EXPIRE_TIME. Unfortunately, the
neighbor pointers 'a' and 'prev_a' were never advanced when timer was
not expired. Therefore it would get stuck in a tight loop, advancing
'al_timer' until it would be greater than NEIGHBOR_EXPIRE_TIME. This
caused the neighbor to allways get timed out and dropped. Furthermore,
there was a second bug in this loop when deleting an item that was not
at the head of the list (i.e., prev_a should stay the same instead of
advancing).
This bug fix is the work of Konrad Lorincz. Bug found and fix made on
netbsd-6.
This material is based upon work supported by the Defense Advanced
Research Projects Agency and Space and Naval Warfare Systems Center,
Pacific, under Contract No. N66001-09-C-2073. Any opinions, findings
and conclusions or recommendations expressed in this material are
those of the author(s) and do not necessarily reflect the views of the
Defense Advanced Research Project Agency and Space and Naval Warfare
Systems Center, Pacific.
Approved for Public Release, Distribution Unlimited
md_post_disklabel() and md_pre_update(), abstract them out to an MI
set_swap_if_low_ram() and call from the appropriate MI places.
Now all platforms add swap if the system has <= 32M of RAM.
run before we create an output window. On a swapping VAX it can take
seriously longer, and we get interactive status display even if the program
did not produce any error output otherwise.
We tested for signal(3) to return 0 for success, which is incorrect:
signal(3) returns the previous handler. Success should be tested as
!= SIG_ERR, otherwise we fail when a signal handler was previously
installed by perfused(8) parrent process, which happens to be the
FUSE filesystem.
Those printf()s are used for "identify" command but cpu_probe_base_features()
is shared by ucodeupdate_check(), too. This change fixes a problem that
the "ucode" command print extra output.
to gcc-4.8 for discovering the bug and to Atari for having a LABELOFFSET of
516 > 512 :-)
XXX: Perhaps we should put all those constants in <sys/bootblock.h> instead
of spreading them around.
and not checking the result of localtime can lead to tears.
Add a safectime() that always returns a good string, and add some debugging
so that we can see if there is indeed something wrong in the new libc time
code.
the appropriate variable, boottype.bp_consdev, not the uninitialized
bp.bp_consdev. Also remove bp and bootxx since their only use was in
the incorrect check. This should fix the problem of sysinst segfaulting
when you choose "Use existing bootblocks" on amd64.
dhcpcd will ensure the IPv6 network is up before forking.
ping the IPv4 default route before the nameserver as the nameserver
could be over the default route anyway.
Fixes the core issue with PR install/49231.
Extract configured information from resolv.conf and hostname instead
of scraping the last dhcpcd script run.
This will allow the use of DHCPv6 and IPv6RA DNS details in the future.
Remove rtsol(8) from rc.d/network.
Add -w seconds command to ifconfig to wait for N seconds for until DAD
has finished on all addresses.
Use ifconfig -w in rc.d/network instead of a forced sleep.
As discussed on tech-net@
they are included on all boot media.
Some of the previous method of setting the console (and conspeed, when
using serial console) is retained, but it should probably be reworked.
Also, adapt to the fact that we may be installing to a disk wedge.
With this change, it is now possible (but still ugly) for sysinst to
create a bootable GPT-labeled disk.
- Split off npf_conn_export(). Add npf_ifmap_getname() and use it to save
the interface name; pick it up on npf_conn_import().
- Misc fixes. Bump NPF_VERSION.
Don't try to assign negative values to unsigned quantities.
Use strtouq(), not atoi(), to read 64-bit values.
Booting from an installed GPT-labelled disk still doesn't work,
but at least sysinst doesn't crash as soon as a GPT is created.
* Elide some unnecessary pairs of quotation marks, to improve readability.
For example, shell_quote "''" is now \'\' instead of ''\'''\'''.
* Don't add quotes around words that contain only safe characters,
to improve readability.
* LC_COLLATE=C to prevent [a-zA-Z] from matching non-ASCII characters.
* Use ${SED} if defined.
from Eugene Lozovoy: add extended partitioning options to sysinst.
Still needs some testing and polishing, but it now is possible to use GPT
or to create a RAID set from scratch and install onto it.
instead of consing up a string and printing it to stdout, just print
to stdout. Not as compositionally tidy, but much simpler and perfectly
adequate here.
This makes the presence of sysinst in /usr/sbin MI (as intended) --
remember that one of the goals is for sysinst to be able to install
chroots, and installing a chroot is a sensible operation on all ports,
even those for which an installer per se might not make sense.
Currently this dummy architecture fails instead of doing anything, but
as they say, one thing at a time.
This commit only physically moves the sources - there are no other
changes, to maximize the probability that this will be treated as a
rename if we ever do manage to migrate away from CVS.
Moving sysinst has been discussed on and off for years and has two
goals: making it easier to work on sysinst, and also making sysinst
available on running systems for use installing chroots and VM images
and other such things. None of the latter is possible yet, but as they
say, one thing at a time.
Doing this now was approved in an impromptu fashion by mrg, riz,
riastradh, me, and groo.
- Add support for saving a snapshot of the current connections together
with a full configuration. Support a reverse load operation. Eliminate
the old 'sess-save' and 'sess-load' in favour of the new mechanism.
- Share code between load and reload operations: the latter performs
load from npf.conf without affecting the connections.
- Simplify and fix races with connection loading.
- Bump NPF_VERSION.
Move all the reference manuals to subdirs of /usr/share/doc/reference.
We have subdirs ref1-ref9, corresponding to man page sections 1-9.
Everything that's the reference manual for a program (sections 1, 6,
8), C interface (sections 2, 3), driver or file system (section 4),
format or configuration (section 5), or kernel internal interface
(section 9) belongs in here.
Section 7 is a little less clear: some things that might go in section
7 if they were a man page aren't really reference manuals. So I'm only
putting things in reference section 7 that are (to me) clearly
reference material, rather than e.g. tutorials, guides, FAQs, etc.
This obviously leaves some room for debate, especially without first
editing the docs with this distinction in mind, but if people hate
what I've done things can always be moved again.
Note also that while roff macro man pages traditionally go in section
7, I have put all the roff documentation (macros, tools, etc.) in one
place in reference/ref1/roff. This will make it easier to find and
also easier to edit it into some kind of coherent form.
Update the <bsd.doc.mk> infrastructure, and update the docs to match
the new infrastructure.
- Build and install text, ps, pdf, and/or html, not roff sources.
- Don't wire the chapter numbers into the build system, or use them in
the installed pathnames. This didn't matter much when the docs were a
museum, but now that we're theoretically going to start maintaining
them again, we're going to add and remove documents periodically and
having the chapter numbers baked in creates a lot of thrashing for no
purpose.
- Specify the document name explicitly, rather than implicitly in a
path. Use this name (instead of other random strings) as the name
of the installed files.
- Specify the document section, which is the subdirectory of
/usr/share/doc to install into.
- Allow multiple subdocuments. (That is, multiple documents in one
output directory.)
- Enumerate the .png files groff emits along with html so they can be
installed.
- Remove assorted hand-rolled rules for running roff and roff widgetry
and add enough variable settings to make these unnecessary. This
includes support for
- explicit use of soelim
- refer
- tbl
- pic
- eqn
- Forcibly apply at least minimal amounts of sanity to certain
autogenerated roff files.
- Don't exclude USD.doc, SMM.doc, and PSD.doc directories from the
build, as they now actually do stuff.
Note: currently we can't generate pdf. This turns out to be a
nontrivial problem with no immediate solution forthcoming. So for now,
as a workaround, install compressed .ps as the printable form.
files from ${BINARYDIR}/etc/mtree/set.{etc,xetc} as a list of files to
copy (and copy using pax instead of cp).
This prevents unnecessary copying of extraneous files, such as in the
case that BINARYDIR refers to a directory where everything has been
unpacked, instead of a directory where only the etc and xetc sets have
been unpacked.
Also convert a relative TEMOROOT to an absolute path.
(dom_alive), create a state enumeration (domainstates) and use it
instead.
Instead of three states (new, alive, and, effectively, 'troubled') go
to five: new, alive, pinging, lost, and dead.
Domains start in the NEW state. When we get a reply from a server, the
state goes to ALIVE. The state is set to PINGING when we ping the
server (once a minute normally) and if the ping times out, it goes to
LOST. If we stay lost for a minute, go to DEAD, and in DEAD, do
exponential backoff of nag_servers calls.
Getting rid of the broken logic attached to the 'troubled' state fixes
PR 15355 (ypbind defeats disk idle spindown) -- it will now only
rewrite the binding file when the binding changes.
Also, fix the HEURISTIC code so it doesn't trigger except in ALIVE
state. I think this was the source of a lot of the spamming behavior
seen in PR 32519, which is now fixed.
Might also fix PR 23135 (broadcast ypbind sometimes fails to find
servers).
Processing arguments just sets flags -- may as well do it first, and
this way detection of silly errors isn't contingent on having things
fully configured and operating.
"evil", this isn't one of them. Since the logic involved is to wait
until the default domain binds before backgrounding, call the variable
"started" instead.
- net.sdl for the active link-layer adddress (the MAC)
- net.ether.multicast for the Ethernet multicast addresses
- net.inet6.multicast for the IPv6 multicast groups
- net.inet6.multicast_kludge for temporarily removed multicast groups
Use this sysctls for replacing the kmem grovelling in ifmcstat(8).
wiz