Add a device iterator object, deviter_t, and methods deviter_init(),
deviter_first(), and deviter_next() for visiting each device in
the device tree.
Take care not to re-shutdown a device in the event that the machine
panics during reboot and the operator types 'reboot' at the kernel
debugger prompt.
While I'm here, sprinkle PMF_FN_ARGS, PMF_FN_PROTO, et cetera.
device_private(NULL). That will ease the conversion of drivers to splitted
softc/device_t which is mandatory for cube-autoconf and will be done in
HEAD.
can register a shutdown handler explicitely.
Install a pci bus shutdown handler which disables bus master accesses
for all childs, so the drivers don't need to care.
This will hopefully be sufficient to replace the shutdownhooks
(together with the powerhooks). (It has been suggested to use some
general event notification framework for shutdown handlers, but there
might be cases where shutdown handlers must be run in an order following
the device hierarchy, which wouldn't be easy with event handlers
not tied to drivers.)
approved by David Young
by config_detach_children(), because the latter can work recursively
and remove any number of devices, so rewrite config_detach_children()
to restart list traversal after each call of config_detach(), and since
only one user of device_foreach_child() is left (in kern_drvctl.c),
and it is simpler to open-code the loop than to deal with callbacks,
just remove it.
run, which we need to do from drvctl(4) sometimes.
Add device_foreach_child() for calling a function on each child of
a device_t.
Add config_detach_children() for detaching all of the children of
a device (uses device_foreach_child()).
The general trend is to remove it from all kernel interfaces and
this is a start. In case the calling lwp is desired, curlwp should
be used.
quick consensus on tech-kern
(xxx_INIT to xxx_HEAD_INITIALIZER). Drop code which inits
non-auto (global or static) variables to 0 since that's
already implied by being non-auto. Init some static/global
cpu_simple_locks at compile time.
don't expect struct device as first field of softc. device_private uses
a new field of struct device to give the softc address and that field is
either set the struct device for old-style devices or a separate
allocation by config_devalloc. Both macros are intended as temporary
bandaid until all drivers are converted and will be removed later.
after cpu_configure(9) for now because softintr(9) is initialized
in cpu_configure(9) on some ports.
Ok'ed by ad@ on current-users, and fixes hangs on m68k ports
during scsi probe.
config_handle_wedges() and read_disk_sectors(). On x86, handle_wedges()
is a thin wrapper for config_handle_wedges(). Share opendisk()
across architectures.
Add kernel code in support of specifying a root partition by wedge
name. E.g., root specifications "wedge:wd0a", "wedge:David's Root
Volume" are possible. (Patches for config(1) coming soon.)
In support of moving disks between architectures (esp. i386 <->
evbmips), I've written a routine convertdisklabel() that ensures
that the raw partition is at RAW_DISK by following these steps:
0 If we have read a disklabel that has a RAW_PART with
p_offset == 0 and p_size != 0, then use that raw partition.
1 If we have read a disklabel that has both partitions 'c'
and 'd', and RAW_PART has p_offset != 0 or p_size == 0,
but the other partition is suitable for a raw partition
(p_offset == 0, p_size != 0), then swap the two partitions
and use the new raw partition.
2 If the architecture's raw partition is 'd', and if there
is no partition 'd', but there is a partition 'c' that
is suitable for a raw partition, then copy partition 'c'
to partition 'd'.
3 Determine the drive's last sector, using either the
d_secperunit the drive reported, or by guessing (0x1fffffff).
If we cannot read the drive's last sector, then fail.
4 If we have read a disklabel that has no partition slot
RAW_PART, then create a partition RAW_PART. Make it span
the whole drive.
5 If there are fewer than MAXPARTITIONS partitions,
then "slide" the unsuitable raw partition RAW_PART, and
subsequent partitions, into partition slots RAW_PART+1
and subsequent slots. Create a raw partition at RAW_PART.
Make it span the whole drive.
The convertdisklabel() procedure can probably stand to be simplified,
but it ought to deal with all but an extraordinarily broken disklabel,
now.
i386: compiled and tested, sparc64: compiled, evbmips: compiled.
as possible. For that, split out a function which does the allocation
of a softc (without linking it into global structures) and a function
which inserts the device into the global alldevs lists and the per-driver
cd_devs.
There is a little semantic change involved: the pseudo-device code didn't
interpret FSTATE_STAR as such, for no good reason. This looks harmless;
I'll modify driver frontends as I find ways to test.
Get config_makeroom() out of the public namespace - that's clearly an
internal of autoconf which drivers can't be allowed to deal with.
we can implement an universal submatch() function covering all
the standard cases:
if (<configured> != <wildcard> && <configured> != <real>)
then fail
else
ask device match function
explicitely by a plain integer array
the length in now known to all relevant parties, so this avoids
duplication of information, and we can allocate that thing in
drivers without hacks
necessary information to create the pseudo-device instance. Pseudo-device
device's will reference this cfdata, just as normal devices reference
their corresponding cfdata.
Welcome to 2.99.10.
loadable drivers and user controlled attach/detach of devices.
An outline was given in
http://mail-index.NetBSD.org/tech-kern/2004/08/11/0000.html
To cite the relevant parts:
-Add a "child detached" and a "rescan" method (both optional)
to the device driver. (This is added to the "cfattach" for now
because this is under the driver writer's control. Logically
it belongs more to the "cfdriver", but this is automatically
generated now.)
The "child detached" is called by the autoconf framework
during config_detach(), after the child's ca_detach()
function was called but before the device data structure
is freed.
The "rescan" is called explicitely, either after a driver LKM
was loaded, or on user request (see the "control device" below).
-Add a field to the device instance where the "locators" (in
terms of the autoconf framework), which describe the actual
location of the device relatively to the parent bus, can be
stored. This can be used by the "child detached" function
for easier bookkeeping (no need to lookup by device instance
pointer). (An idea for the future is to use this for generation
of optimized kernel config files - like DEC's "doconfig".)
-Pass the locators tuple describing a device's location to
various autoconf functions to support the previous. And since
locators do only make sense in relation to an "interface
attribute", pass this as well.
-Add helper functions to add/remove supplemental "cfdata"
arrays. Needed for driver LKMs.
There is some code duplication which will hopefully resolved
when all "submatch"-style functions are changed to accept the
locator argument.
Some more cleanup can take place when config(8) issues more
information about locators, in particular the length and default
values. To be done later.
dyoung