Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
66,555 Commits 606 Branches 0 Tags 3.1 GiB
103a704990
Commit Graph

8098 Commits

Author SHA1 Message Date
bouyer
1970e14b93 Add HPT366/370 device ID. 
XXX Is 'TRIONES' the rigth vendor name ?
 2000-06-12 21:12:30 +00:00
bouyer
12d3bf8c1a Add a callback (*irqack), for controllers that need special action to ack 
the interrupt once it has been ack'd on the drive.
 2000-06-12 21:10:40 +00:00
bouyer
221a99f782 Handle "scsi bus mode change" interrupts on 895 and higther. 
Thanks to Hal Murray for reporting the problem and testing the fix.
 2000-06-12 20:13:41 +00:00
ad
397fa0e4e2 Fix a couple of pastos. 2000-06-12 11:07:45 +00:00
mrg
b9140fbc0c KNF a line. 2000-06-12 05:25:48 +00:00
mrg
305e44c869 check for when cnopen() will call itself recursively, and panic instead of losing badly. 2000-06-12 05:02:22 +00:00
bouyer
7bb3d03448 Relax condition on 'sn' for atapi probe, it can be different from 0x1 with 
some controllers/devices. Fixes a problem reported by Markus Illenseer.
 2000-06-11 17:09:34 +00:00
oster
7a0d138818 Nuke a (mostly) now-incorrect comment. 2000-06-11 03:35:38 +00:00
sommerfeld
ea313649ff defopt MIIVERBOSE 2000-06-11 02:13:34 +00:00
ragge
cc483219bc Must be able to compile without "mtc". 2000-06-10 19:44:55 +00:00
sommerfeld
8e8ecc1bb5 portability fix: when rotating, don't do shifts >= wordsize. 2000-06-10 17:01:15 +00:00
wrstuden
eb21ed4746 Adapt to going back to decemal device numbering. 2000-06-09 18:00:45 +00:00
wrstuden
8d04cd3f90 Rather than assinging 64 tty's per pci card, assign tty's as found. 
Cyclades says driver should work with up to 128 tty's per pci card
even though they only support 64 now. Also matches FreeBSD behavior.

Print located tty's using new tty naming scheme - ttyCZ?? where ?? are
two hex letters.

Make firmware load on macppc - one le32toh() was missing.
 2000-06-09 16:53:23 +00:00
drochner
7b82c5ef6c add EGA display type 2000-06-09 16:07:55 +00:00
onoe
73a779fa1f Restore the original copyright notice by Bill Sommerfeld 
<sommerfeld@netbsd.org> since it is based on the original code.
 2000-06-09 14:36:25 +00:00
onoe
7b45a44396 Add Farallon SkyLINE Wireless LAN Card for awi(4) driver. 
Tested on FreeBSD 3.4-RELEASE by Dirk-Willem van Gulik <dirkx@webweaving.org>.
 2000-06-09 13:05:02 +00:00
enami
5a4b9fcbbf Prevent a process being swapped out during I/O if the data buffer is 
allocated on stack.  This potential problem is noticed by Noriyuki Soda
and the idea and sample code to fix is given by Jason R. Thorpe.
 2000-06-09 08:54:19 +00:00
gmcgarry
f44d7a9a53 Rename remaining references from xe to xi. Clean up debug messages. 2000-06-09 08:22:13 +00:00
onoe
4da3935bae cleanup haeders. 
add opt_awi.h to define AWI_DEBUG, AWI_WEP_ARC4.
show the firmware version at attach.
create a framework to support WEP (encryption code is not included for now).
a new wiconfig compatible ioctl interface replaced the awictl interface.
fix memory leak in selecting AP
fix bugs in ESSID selection
changes from FreeBSD-current by Warner Losh:
  revision 1.2
  date: 2000/04/17 22:58:15;  author: imp;  state: Exp;  lines: +16 -1
  Provide mem* for compat with NetBSD to fix LINT
fixes from FreeBSD-current by Guido van Rooij:
  revision 1.4
  date: 2000/05/29 19:58:10;  author: guido;  state: Exp;  lines: +5 -2
  Fix a panic resulting from an obvious null pointer deref.
  Apparently some other panics still exist in this driver, but with
  this fix, it was at least possible to run the Nokia card at SANE 2000.
 2000-06-09 05:31:15 +00:00
soda
0f76c56f2d increase number of parameters of pckbc_cnattach(), since offset of command port 
is not 4 (KBCMDP), but 1 on jazz based platforms of arc port.
 2000-06-09 04:58:32 +00:00
soda
8ac7bdd00c changes for NEC RISCstation 2250 of arc port. 2000-06-09 04:48:12 +00:00
soda
77625cf7ec long long constant needs "LL" suffix. 2000-06-09 04:45:53 +00:00
augustss
b8f4f2be87 Regen. 2000-06-09 00:21:08 +00:00
augustss
def28a5cd2 Add some PCI devices found in the IOpener (commited from the IOpener itself :). 2000-06-09 00:20:18 +00:00
cgd
1e158fae9a nuke bogus use of s = spl0() / splx(s). reviewed by Jason Thorpe. 2000-06-08 22:43:15 +00:00
gmcgarry
6dd21e55a9 Make attach messages consistent with PCI drivers. Make function pointer 
usage consistent with other drivers.
 2000-06-08 22:15:52 +00:00
ragge
944b6966e9 Fix a transmit bug and get a little more out from the receive logic. 2000-06-08 19:58:49 +00:00
cgd
625dbd8f87 in allegedly-MI code, if we're gonna use '#pragma pack(N)', #pragma pack() 
should be used to reset the packing.  (#pragma pack(4) was used here
before.  "wrong!")
 2000-06-08 18:22:15 +00:00
haya
b6a821f042 Change IPL when bridge's interrupt handler calls child device's 
interrupt handler (This solution is not very good).
 2000-06-08 10:28:28 +00:00
cgd
d8dcb11d4f don't include ISA headers. these have been properly abstracted so that 
the ISA headers are unnecessary, and they're used by PCI VGA.  There may
not be any ISA at all.
 2000-06-08 07:01:19 +00:00
scw
295ed77595 The OPTi controller supports a 32-bit dataport after all. 
Also detect when the chip is sitting on a 25MHz PCIbus and
set the timing registers accordingly.
 2000-06-07 20:42:52 +00:00
ad
887d4555cd Regen. 2000-06-07 19:53:17 +00:00
ad
4837200a8c Add vendor/device ID for 3ware Escalade IDE RAID controller. 2000-06-07 19:52:07 +00:00
tsutsui
3f94f56142 Adapt struct scsipi_adapter changes. 2000-06-07 14:40:20 +00:00
mrg
a67130a218 regen. 2000-06-07 09:55:22 +00:00
mrg
09b843b7f6 fix a couple of the sun entries. 2000-06-07 09:52:16 +00:00
haya
dca97557cd Add CB_BCR_RESET_ENABLE in bridge control resister's bit definition. 2000-06-07 09:02:46 +00:00
thorpej
b15bbb90f9 Add missing break; 2000-06-07 04:31:49 +00:00
soren
13ed0863f8 Regen. 2000-06-07 01:58:17 +00:00
soren
e2c1012576 Add Trident 9397DVD. 2000-06-07 01:57:30 +00:00
thorpej
23ef490928 Deal with the fact that tsleep() may be a macro. 2000-06-07 00:33:51 +00:00
thorpej
c85d6d7ca3 Improve the Cypress name a little. 2000-06-06 22:56:06 +00:00
thorpej
a452638f06 In pciide_mapreg_dma(), check to see what type the BAR is before 
mapping the registers, as suggested by a comment in that function.
 2000-06-06 22:47:22 +00:00
jdolecek
d98bf28b13 Make the frontend print a newline (follows similar change for isa and pcmcia front-ends) 2000-06-06 20:09:20 +00:00
soren
10e30038a9 Fix braino in previous, pointed out by Jaromir. 2000-06-06 18:42:47 +00:00
soren
a4f554c4ac Add CS4235 MPU id. 2000-06-06 18:08:51 +00:00
soren
ba5df2479b Shorten names of VIA controllers to fit in 80 columns with versions. 2000-06-06 17:48:12 +00:00
thorpej
c40fa3c4d4 Actually program the DMA mode of the drives into the Cypress 
controller.  Fixes a long-standing problem where IDE DMA wasn't
working on the AlphaPC 164SX.
 2000-06-06 17:34:22 +00:00
soren
3b8b24cffe Only wait 100 ms instead of 1 s for the SEEPROM to come ready. This is 
still plenty for cards with SEEPROM's and reduces the delay on platforms
without, which conveniently also avoids triggering the O2 watchdog timer.
 2000-06-06 17:29:40 +00:00
soren
b4b667c0a0 Make ID printing a little more robust in case of problems reading 
AC97 registers.
 2000-06-06 17:25:52 +00:00
soren
d862695c41 Make 3Com names a little more consistent. 2000-06-06 17:21:42 +00:00
soren
f0d0078f1b Add Olicom GoCard. 2000-06-06 17:19:59 +00:00
soren
cd4324537d Density codes are usually given in decimal, so print them that way. 2000-06-06 17:16:02 +00:00
soren
8b0390203b Some minor diagnostics cleanups. 2000-06-06 16:41:33 +00:00
soren
63649c5744 Make the frontend print a newline. 2000-06-06 16:27:49 +00:00
soren
1ec719ccc0 Add power management hooks. 2000-06-06 16:26:57 +00:00
sommerfeld
f1802cf848 Fix previous change: guard against missing subdevices of pckbc. 2000-06-06 16:21:22 +00:00
soren
4b7ec26c89 One comment too much.. 2000-06-06 16:16:36 +00:00
soren
c4df411abd Add comments for a few drivers and the lines for the Tropic attachment. 2000-06-06 16:15:31 +00:00
tsutsui
499db14bcb sun3 always defines Debugger(), so don't redefine it. 2000-06-06 14:24:05 +00:00
pooka
e1e9261889 fix typo 2000-06-06 14:01:40 +00:00
augustss
1c94b92bc4 Initialize pointer before doing free of it. 2000-06-06 11:36:21 +00:00
kleink
05d7f969b9 Regen. 2000-06-06 07:55:50 +00:00
kleink
aed5858e8b Add the product ID for the ESS Maestro 3 modem function as well. 2000-06-06 07:55:17 +00:00
thorpej
21d9669e4f Common routines for read/writing Cypress 82c693 control registers. Needed 
by `pciide' and the Alpha `sio' (PCI-ISA bridge) driver.
 2000-06-06 03:07:39 +00:00
sommerfeld
bbca3924cd Replace "timestamp" with "counter" in previous change, to avoid any 
possible confusion that it has anything to do with accurate
measurement of time.

New names:
	__HAVE_CPU_COUNTER
	cpu_counter()
	cpu_hascounter()
 2000-06-06 01:33:15 +00:00
sommerfeld
7497ddcce5 /dev/random code cleanups: 
- Add comments about which spls apply to which data structures.
 - Consistently protect the rnd_samples queue (the queue of
unprocessed samples) at splhigh().
 - allow MD code to supply cpu_timestamp() and cpu_havetimestamp() for
an optional higher-resolution clock/roulette wheel source.
 - Collect more statistics on the pool state (keeping track of where
collected bits are going, in addition to where they came from).
 - Add RNDGETPOOLSTAT ioctl to get the additional stats.
 - Flush a few unused rndpool calls.
 - XXX XXX Cryptographic changes:
  - 32-bit rotate is:
	((val << rp->rotate) | (val >> (32 - rp->rotate))),
    not
	(val << rp->rotate) | (val >> rp->rotate)
    or
	((val << rp->rotate) | (val >> (31 - rp->rotate)))
  - Avoid overloading of rp->rotate and double-rotation of data
(which limited pool mixing somewhat; "rotate" never got above 7).
  - Be more paranoid (but probably not paranoid enough) about mixing
output back into the pool.  This is an improvement, but it needs
revisiting soon.

We should follow the spirit of some of the recommendations in
the Schneier PRNG papers:

http://www.counterpane.com/yarrow-notes.html
http://www.counterpane.com/pseudorandom_number.html

including:
 - two (or more) stage operation for better isolation between inputs
and outputs.
 - use of keyed one-way functions (probably better even than
invertible keyed functions like 3DES) at key points in the data flow,
so that breaking the PRNG is clearly as hard as breaking the function.
 2000-06-05 23:42:34 +00:00
gmcgarry
fc43b2daa3 Replaced by xi(4). 2000-06-05 23:21:35 +00:00
gmcgarry
d0241b393f Replace references to xe with xi. Clarify description to avoid 
confusion with the Xircom tlp-based cards.
 2000-06-05 23:18:50 +00:00
gmcgarry
3129070fd6 New driver for Xircom CreditCard PCMCIA Ethernet. Replaces xe driver which 
didn't work.  Renamed to avoid clash with next68k network driver.
 2000-06-05 23:14:22 +00:00
gmcgarry
63ce2b1954 Clean up usage of XIRCOM/TDK identifiers. 2000-06-05 23:06:31 +00:00
gmcgarry
923b803b77 Regen. 2000-06-05 23:05:30 +00:00
gmcgarry
b1cff781b9 - Clean up XIRCOM entries 
- Add entry for Xircom CreditCard Ethernet + Modem 28
- Add entry for Intel EtherExpress PRO/100
- Add entry for Compaq Netelligent 10/100 Ethernet
 2000-06-05 23:04:04 +00:00
gmcgarry
c2a8e26e11 - remove conditional compilation on NAUDIO 
- use preprocessor for constants
 2000-06-05 23:02:04 +00:00
sommerfeld
bcf02ec8ff If rnd is configured into the kernel, do rnd(4) entropy collection 
from devices connected to pckbc:
 - Do actual sample collection in pckbc.
 - Add rndsource_element_t to the slot data.
 - Change pckbc_set_inputhandler() to take an additional argument,
the name of the device, which is (eventually) passed into
rnd_attach_source() to identify the source.
 - Change callers of pckbc_set_inputhander() appropriately.
 2000-06-05 22:20:54 +00:00
bouyer
0e7cd755f4 use the correct variable in a debug printf(). 2000-06-05 21:47:25 +00:00
chs
d4ffcd0cec change ifdef __sun3__ to sun3, since the former isn't defined on sun3. 
(not that it matters, since the sun3 currently has its own copy of
these files anyway, but it's nice to be consistent.)
 2000-06-05 15:58:43 +00:00
tsutsui
5138b1b1bb Well, this is esp_pcmcia, not esp_pci. 2000-06-05 15:36:45 +00:00
tsutsui
a12331c461 Oops, struct scsipi_adapter was changed recently. 2000-06-05 15:19:42 +00:00
tsutsui
8c4d1bf1f9 Adapt MI ncr53c9x changes. 2000-06-05 15:08:00 +00:00
kleink
ca3d9c7fa7 Regen. 2000-06-05 11:34:07 +00:00
kleink
428a7ca4e3 Add the ESS Maestro 3 product ID as well. 2000-06-05 11:33:35 +00:00
kleink
9b40e3731a Regen. 2000-06-05 11:31:15 +00:00
kleink
be40495bb0 ESSTECH: 
* add what's allegedly the Maestro 1's product ID.
* align product names with data sheets.
 2000-06-05 11:29:28 +00:00
nisimura
4371d91433 Have MI ncr53c9x_attach() the 2nd and 3rd arguments for scsipi_adater 
and scsipi_device respectively, with size reduction of ncr53c9x_softc.
Specifying NULL instructs the driver to use default adapter and default
device codes. Every target port has ncr53c9x_attach(sc, NULL, NULL) anyway.
 2000-06-05 07:59:50 +00:00
matt
6204fa3c99 Update to new evcnt stuff 2000-06-05 02:28:19 +00:00
matt
2f85fe7adb Adjust to new evcnt stuff. 2000-06-05 00:09:17 +00:00
gmcgarry
745e3fef63 pciiide -> pciide 2000-06-04 22:22:12 +00:00
gmcgarry
a5156a5c97 Cleanup #if 0 cruft. 2000-06-04 22:21:09 +00:00
cgd
cffb580806 Implement the more flexiable `evcnt' interface as discussed (briefly) on 
tech-kern and now documented in evcnt(9).
 2000-06-04 19:14:14 +00:00
fvdl
c8c1e5854f Fix wrong test for (software) queue blocked condition. 2000-06-04 11:42:55 +00:00
matt
0bd304e528 More event counter stuff. Plus a little cruft cleanup while doing it. 2000-06-04 06:16:53 +00:00
oster
6dcc553fae Remove outdated comment. 2000-06-04 02:16:05 +00:00
matt
11ab56a399 Start counting interrupts. 2000-06-04 02:14:42 +00:00
matt
576faa0c31 Start couting interrupts. 2000-06-04 02:14:12 +00:00
oster
0b63accce0 Merge rf_update_component_labels() and rf_final_update_component_labels(). 2000-06-04 02:05:13 +00:00
oster
1dcc041500 Minor prototype cleanup. 2000-06-04 01:39:49 +00:00
fair
e3a9f21a5f Change the debug level from 1 to 3 for "skipping target" diagnostic 
which spews unreasonably for a Qlogic SCSI-2 narrow controller, which
does not have ID's above 7.
 2000-06-03 22:44:43 +00:00
oster
2c127bf249 Allow getting a component label from a spare disk. 2000-06-03 16:44:43 +00:00
matt
2c336f1de3 Add VAX display types along with the SPARCbook P9100. 2000-06-02 23:45:13 +00:00