conf/param.c, and move the initialisation of the sb_max
variable from kern/uipc_socket2.c to conf/param.c. Now
everthing that includes sys/socketvar.h doesn't get
recompiled when SB_MAX's value changes.
bootinfo record to 1kB (we are using less than 200 bytes now) so that it
doesn't run into addition PROM memory.
At 0x8001f00 the bootinfo record was stomping on some memory used by the
SFB cards for font information.
equivalent to a "block" is in FFS. Fixes vnds on MSDOSFS, and should
eliminate a 'getblk: block size invariant failed' panic.
Directly from PR7380 <elric@imrryr.org>.
+ Initialise minaddr to the start of the file I/O buffers.
+ Check for overallocation of RAM for these buffers.
+ Change function name in panic message to match reality.
Code taken from almost every other port, and fixes the:
uvm_km_suballoc: unable to allocate space in parent map
panic that some people have been experiencing.
in DDB (e.g. if a bad pointer was dereferenced; the debugger will recover).
- Change a comment to indicate that we are on the debugger stack when we get
to ddb_trap().
- Fix possible buglet in computation of the branch target in db_branch_taken().
happen. If the debugger doesn't handle the trap, arrange things so the
debugger won't be called again before we panic.
- Before panic'ing, give the debugger a chance to field the trap, and
if the debugger has handled things, allow the kernel to continue running,
like the i386 port does.
debugger differently.
- Pull in debugger glue if DDB is configured.
And one unrelated change, while I was here: Don't create a fake trapframe
for main(); it hasn't been used by main() for quite some time, and panic
if main() returns, because that's not supposed to happen now.
has already been called and thus we know the values the timers are using.
This also ensures that clock_sc will always be valid when we try and use
it to read the timer registers.
Fixes PR7357.
per-packet discard of every received packet increases latency and
decrease throughput. INstead, Spin on S_COMMAND_IN_PROGESS for enough
iterations as the expected time to completion. Only do DELAY()/poll
loops (as suggested by Jason Thorpe) if spinning fails.
Take PCI as fastest case and compute worst-case estimate.
Shorten DELAY() in S_COMMAND_COMPLETE polling-loop up 10, loop-count
down. to speed up epreset() completion (m/c filter change, ifup/ipdown, etc).
* Clear the `enabled' bit in the softc so late hardware interrupts
(e.g., just after the full reset) done as part of shutdown) are dropped.
* Eliminate loops that poll forever on S_COMMAND_IN_PROGRESS to complete.
Add inline function with bounded loopcount plus small delay, to avoid
bugs in EISA hardware which never sets S_COMMAND_IN_PROGRESS.
Use for both TX_RESET/RX_RESET/GLOBAL_RESET cmds, and polling for
discard-Rx completion
- Actually display the kn300 irq, not the MCPCIA irq, in the interrupt
string. Also, don't bother displaying device/pin on strays, since
it doesn't play will with shared interrupts that would happen due to
a PCI-PCI bridge.
- Shave a few more cycles out of the interrupt dispatch routine.
Power Macintoshes with PCI IDE (e.g. the new Blue G3) don't have them
wired to compatibility mode, so just return a NULL cookie. We still have
to have this routine for the PCI IDE driver to link.
supposed to be Window 1, but a cut'n'paste error made it stomp over
Window 0, thus breaking ISA DMA. Fix this. (Confirmed to work with
floppy driver.)
While I'm here, do something I've been meaning to do for a while: change
Window 1 from a 1G at 2G to a 2G at 2G direct-mapped window, and add
a Window 2 of 1G at 1G SGMAP-mapped. Chain Window 2 to Window 1, and
use it as a fall-back for PCI DMA if the system has more than 2G of RAM.
The access is more efficient this way (and this was done in the interrupt
dispatch code, so some cycles are actually shaved), and gcc gets annoyed
when chars are used as array subscripts.
- Adjust for the fixed Rawhide console initialization.
- When mapping a PCI interrupt, don't always map device 1 to IRQ 16. Device
1 is only the internal 53c810 on MID 5, and is an invalid device number
on any other MID.
- Adjust for change mcpcia_config/mcpcia_softc structures.
- Nuke the kludgy linked list of mcpcia_softc structures. Instead, just
use savunit[v] to index into mcpcia_cd.cd_devs[] to find the MCPCIA
which has the stray interrupt.
- Some other minor cosmetic cleanup.
which holds state of the MCPCIA to which the console is attached.
- All MCPCIA info is now stored in the mcpcia_config structure; the
mcpcia_softc only contains a struct device and a pointer to one of these.
- If attaching the console MCPCIA, use the static configuration, else allocate
the substructure.
- Rename mcpcia_init() to mcpcia_init0(), and make it take a "mallocsafe"
argument.
- Implement a new mcpcia_init(), which looks for the MCPCIA which has the
EISA bridge attached. Initialize this MCPCIA as the console MCPCIA (the
console on the Rawhide is only allowed on this MCPCIA; firmware rule).
- Eliminate the kludgy linked listed of mcpcia_softcs. Just use mcpcia_cd
to find all configured instances.
Separate bug fix: Actually clear the MCPCIA error mask after probing for
PCI (and ISA) devices, don't just clear it twice in mcpcia_init0().
Some other slight cleanup.
MID order.
- Export the shuffled MID order; other files now need it.
- Don't derive the GID from the unit number of the mcbus. A user could
render his kernel non-bootable by using a different unit number in the
kernel config file. We (and the hardware) only support one MCBUS, so
simply use instance 0. Note that this will need to be adjusted if there
are even any multiple-MCBUS systems.
Instead of using the PROM console until autoconfiguration is complete (at
which time we called dec_kn300_cons_init() directly!), make this work like
basically all of the other systems which have PCI attached consoles. That
is, initialize the PCI chipset which holds the console early, and perform
console initialization at the correct time.
This should make both PCI and ISA display consoles with PC keyboards work
(i.e. the deskside workstation version of the Rawhide).
EIO. The spec says ATAPI devices should support "PIO 3 or better".
They are supposed to support less as well. Setting the device to a highter
mode than the controller shoul'nt be a problem, and this is likely what
happens with legaty ISA controllers.
Solve problem reported by Ruey-Shyang Guo.
Big-endian CPUs should use bus_space_{read,write}_multi_stream methods
to PIO packet data to NIC in 16-bit or 32-bit chunks.
Make it so.
Since we don't have stream methods on all ports yet (esp. i386), use
the bus_space_{read,write}_multi methods if the compile-time
stream-method feature-test macro is not set.
Originally from tsubai@netbsd.org, via HAYAKAWA koichi's cardbus patches.
we can identify them as cardbus chips supported by the cardbus patches.
Add entry for OPTI chipsets whose interrupts arent properly set up by
some BIOSes.
From cardbus patches<ftp://nandra.iri.co.jp/pub/NetBSD/CardBus by
HAYAKAWA Koichi <haya@tcad.ulsi.sony.co.jp>.
DEC disk boot block header, but it's only 64 bytes long. Gives us
another 32 bytes in the first stage.
Don't use a roll-your-own START_FRAME size and offsets for the stack
and ra - use the <mips/asm.h> provided CALLFRAME_SIZ, CALLFRAME_RA and
CALLFRAME_SP
* Add prototype to libkern.h.
* Remove the almost-identical-copy from libsa/net.[ch].
* Change its type back to the (wrong, but harmless) historical one. (u_long)
* Kill the XXX local prototype in nfs_bootparam.c
if the version number is higher than we know about. This allows, e.g.,
changes in the format of the ifile, segment size restrictions and boundaries,
etc., which would not affect existing fields in the superblock, but which
would drastically affect the filesystem, to be smoothly integrated at a
later date.
on (nodes which are not marked IN_MODIFIED/IN_CLEANING, but which have dirty
buffers), by marking them with the appropriate flag if dirtybuffers were added
while the write was in progress.
conditions. Also change the default setting of lfs_clean_vnhead to 0, which
seems to make the locking problems go away (although this is difficult to
test as I can't reliably reproduce them).
then immediately reloaded, their dinodes were located in an inode block
which was not on disk at the advertized location, nor in the cache (although
it would be flushed to disk next segment write). Fix this by using getblk()
instead of lfs_newbuf() for inode blocks.
for the first write. If this is not done, the cleaner may try to clean the
current segment out from under the writer if the filesystem is mounted after
a crash (or any other time that the dirty:clean segment ration is high enough).
drochner