047a69a2e5
Make it start before "SERVERS" and remove redundant dependency on
...
"network". This brings it in line with the altqd script, which has
very similar requirements.
2003-03-14 09:18:50 +00:00
f70738da04
move altqd slightly later in the boot sequence; as it's in /usr/sbin,
...
it needs to depend upon mountcritremote, not run before NETWORKING ...
2003-03-10 18:17:06 +00:00
db97c4116c
Use the pidfile created by wsmoused.
2003-03-04 22:32:11 +00:00
3065ba7178
Execute the actual command as it's set instead of calling the sh
...
routine directly. This allows one to to override a specific command
via the use of /etc/rc.conf.d/sysdb.
2003-02-24 01:04:45 +00:00
117844eb75
change behaviour of 'reload' to only reload the NAT rules and NOT flush
...
the state table, making it much more useful.
The behaviour of 'restart' is unchanged (flush state table and reload
rules), but is now done slightly more elegantly.
ok'd by lukem.
2003-02-16 22:18:46 +00:00
2c589141ff
Implement start_cmd as:
...
start_cmd="${name} "'${rc_arg}'
and stop_cmd & reload_cmd as:
stop_cmd=$start_cmd
reload_cmd=$start_cmd
(Just to be tricky)
2003-01-31 06:47:16 +00:00
405c73366e
Back out previous (as discussed with releng). The correct way to set this is:
...
# echo "myserver" > /var/yp/binding/`domainname`.ypservers
2003-01-16 11:55:28 +00:00
1e0411d0d5
Script to bind a NIS client to a known server.
...
$ grep yp /etc/rc.conf
ypbind=YES
ypbind_flags="-ypset"
ypset=YES
ypset_flags="myserver"
2003-01-16 07:37:33 +00:00
567c0a7e50
in comment, metion about src/distrib/sets/lists/etc/mi as well.
2003-01-10 05:07:45 +00:00
99f6c8054f
add staticroute
2003-01-09 15:58:23 +00:00
e4cf375b81
Script to add and remove static routes:
...
eg:
$ cat /etc/route.conf
# Turn on/off IP forwarding.
+sysctl -w net.inet.ip.forwarding=1
-sysctl -w net.inet.ip.forwarding=0
net 192.168.2.0 -netmask 255.255.255.0 192.168.150.2
2003-01-09 15:57:02 +00:00
8d1054dc70
revert previous; luke and matt want this as a separate script.
2003-01-09 15:52:58 +00:00
22aa10c0a0
Add /etc/route.conf processing to add static routes. Removes one more
...
reason for netstart.local.
2003-01-09 15:12:47 +00:00
2c3ae584e1
Run ldconfig with ${rc_flags} so you can set ldconfig_flags in rc.conf
...
to specify additional a.out directories to merge into the runtime link
cache.
2003-01-08 04:17:19 +00:00
2005231632
Revert last change for now. It causes hangs during system shutdown when
...
NFS filesystems are mounted.
2003-01-07 08:41:55 +00:00
74efbb051c
Add keyword "shutdown" so that this script is really executed on system
...
shutdown to delete clone interfaces.
2003-01-06 10:11:14 +00:00
247d6694f7
Handle links to absolute paths too. Closes my PR 19125.
2002-12-05 16:52:58 +00:00
2cc646d2d1
ipmon -D writes a pidfile; use it
2002-10-21 05:20:00 +00:00
ba5fd9b3f8
/etc/rc.d/mixerctl: Add capability to save and restore mixer settings.
...
Thanks to Julio Merino.
2002-10-12 11:29:28 +00:00
98839fb386
Added cgd rc.d script and put it in the appropriate postinstall and
...
mtree files.
2002-10-09 14:55:53 +00:00
a67080c774
Reorganize the sysdb script so that lkm{1,2,3} can request that the
...
dev database be rebuilt after loading modules. Loading modules might
create new nodes in /dev, but the dev database is being initialized
too soon for lkm2 and lkm3. This means that, eg, /dev/xf86 (typically
marked AFTERMOUNT and loaded by lkm2) will show up properly. Reviewed
by lukem.
2002-10-08 16:21:52 +00:00
6e40068171
Automatically create and destroy cloning interfaces and sync IP Filter
...
immediately afterwards before bringing the interface up. This avoids
a small security gap existing in the previous scheme where IP Filter
was synced after all cloning interfaces were created and brought up.
2002-10-05 05:24:40 +00:00
3e11ad9d79
Print a warning message if IP forwarding is not activated (PR#10295).
2002-09-24 11:03:53 +00:00
8a20c1019d
create a utmpx with the same permissions as utmp
...
Solves pr 18282, although very differently.
2002-09-16 02:23:31 +00:00
df86ef5a9f
Split raidframe parity checking/rebuild out into raidframeparity, which is
...
called after quota so we don't end up with fsck and raidframe parity rebuild
taking forever after a crash/reboot.
While we are here check for raid[0-9].conf & raid[1-9][0-9].conf not
raid[0-9].conf & raid[0-9][0-9].conf
2002-09-03 15:35:51 +00:00
b8ce6e8201
Added touch panel calibration utility.
2002-08-27 14:12:09 +00:00
39acbf03ed
Avoid exit(0) to play more nicely with rc_fast_and_loose.
...
Noted by Greywolf on tech-userlevel.
2002-08-16 18:05:19 +00:00
afbf483286
Add a wdogctl startup/shutdown script.
2002-07-30 05:58:42 +00:00
e9a1e24f95
Ignore "peer" statements for local clocks too when selecting hosts from
...
ntp.conf.
2002-07-19 03:22:09 +00:00
4b77d56d71
Skip blank lines in the input file (mixerctl.conf).
2002-07-16 03:24:24 +00:00
4b45ab0ce1
add comment:
...
"if you're adding new scripts, don't forget to update
src/etc/postinstall and src/etc/mtree/special."
2002-07-03 23:31:25 +00:00
908bf86adc
Check for /dev/clockctl availability and print appropriate diagnosis if not.
2002-07-02 14:47:22 +00:00
490569127e
add wsmoused.
2002-06-29 04:07:08 +00:00
7f89b13752
Add wsmoused
2002-06-27 15:08:55 +00:00
da820a3387
Build the list of names to check for $XXX_chrootdir support from
...
`rcorder -k chrootdir` rather than hardcoding "named ntpd".
Based on [misc/16884] from Jarle Greipsland <jarle@uninett.no>
2002-06-18 14:35:38 +00:00
56dc20a9f6
ntpd_chrootdir needs /dev/clockctl as well
2002-06-17 06:47:58 +00:00
3da8227a70
$ntpd_chroot requires "pseudo-device clockctl" in the kernel
2002-06-15 01:55:44 +00:00
4f32d6fce8
- at least require mountcritremote (mixerctl is in /usr)
...
- read from < mixerctl.conf instead of piping output of cat...
2002-06-11 16:31:41 +00:00
8ebbe63269
Fix typo.
2002-06-02 19:04:10 +00:00
56d95e6efe
Add mixerctl script.
2002-06-02 18:37:45 +00:00
b055b3e3e4
Add boot script to load mixer settings from /etc/mixerctl.conf, if present.
...
This allows one to preserve mixer settings across reboots by running:
mixerctl -a >/etc/mixerctl.conf
2002-06-02 18:36:46 +00:00
a3ed40ee7c
Sync ipf(4) after starting or stopping. This is necesarry to make filter
...
rules for dynamically created interfaces like pppoe(4) effective.
2002-05-04 13:53:02 +00:00
d1d73e68b7
don't bother warning or supporting obsolete $critical_filesystems_beforenet
...
or $critical_filesystems; postinstall now checks for these
2002-04-29 12:29:53 +00:00
25bdefc720
don't bother warning or supporting obsolete $ip6forwarding;
...
postinstall now checks for this
2002-04-29 12:13:14 +00:00
2a48d151ab
don't bother warning about obsolete $defcorename and $nfsiod_flags;
...
postinstall now checks for these
2002-04-29 12:10:23 +00:00
546b01ef65
don't bother warning about obsolete $amd_master; postinstall now does this
2002-04-29 12:08:17 +00:00
244b762de1
Complete the conversion back to the OpenSSH default configuration files of
...
"/etc/ssh/ssh_config" (from "/etc/ssh/ssh.conf") for ssh(1) and other
userland tools, and "/etc/ssh/sshd_config (from "/etc/ssh/sshd.conf")
for sshd(8).
etc/postinstall will detect this, and if "fix" is given, rename the files.
2002-04-29 08:23:34 +00:00
b3cffe8cbf
deprecate $sshd_conf_dir and hardcode /etc/ssh.
...
$sshd_conf_dir wasn't as flexible as liked (it didn't work for ssh(1),
host keys or known_hosts).
2002-04-29 05:55:05 +00:00
39a9178088
- Improve wscons.conf(5)
...
- Add support for "setvar", which allows setting of arbitrary wsconsctl(8)
variables. Per email on tech-userlevel from Julio Merino <jmmv@hispabsd.org>
2002-04-26 00:06:53 +00:00
2c1cfc8e8c
- in <bsd.files.mk>, don't clear FILES after using it, as that prevents
...
make -V FILES
from being useful (and given that every other variable can be
extracted using make -V, the behaviour was unusually inconsistent
given that the original reason for clearing it doesn't seem to be
relevant anymore)
- use <bsd.prog.mk> instead of directly including <bsd.files.mk>
(and possibly <bsd.man.mk> or <bsd.own.mk>)
- remove obsolete NOPROG
2002-04-24 08:18:45 +00:00
martin