0f0563f57f
Declare TCVERBOSE by defopt in files.tc. Include opt_tcverbose.h in tc.c.
1997-09-13 08:52:23 +00:00
4d15bd0b78
Declare SCSIVERBOSE by defopt in files.scsipi. Include opt_scsiverbose.h
...
in scsi_base.c and st.c.
1997-09-13 08:51:15 +00:00
377e2c7b82
Declare PCIVERBOSE by defopt in files.pci. Include opt_pciverbose.h
...
in pci_subr.c.
1997-09-13 08:49:50 +00:00
7f3eb8e4fb
Declare EISAVERBOSE by defopt in files.eisa. Include opt_eisaverbose.h
...
in eisa.c.
1997-09-13 08:48:59 +00:00
12b0c2a20a
The Alpha console uses BOOTP for network booting, so the NetBSD kernel
...
should, too. Enable the BOOTP support in nfs_boot().
1997-09-13 07:42:01 +00:00
27e54e6dc3
Prevent an extra newline from being printed if the root device is a network
...
interface.
1997-09-13 07:38:25 +00:00
6b2d5c18a7
Correct a comment regarding the sense of the nfs_boot_rfc951 global.
1997-09-13 06:16:04 +00:00
f784e8dc15
Apparently, new AlphaStation 500/600 firmware has the same problem with
...
PCI master aborts as eb164 firmware, so use the same workaround mechanism
on all system types (clear error register's master abort bit, and check
it after accessing configuration space), not just eb164's.
This also fixes a bug on eb164's - when making the Alpha port compile
again, I made an error that caused this to not be used on eb164 systems,
either. Thanks to Matt Jacob for pointing out this goof.
1997-09-13 05:58:07 +00:00
f762783999
Wierd- well, what isn't with devices? Anyway, the type code for the ISP
...
chip on AlphaStation 500 is 2- which wasn't handled, and bad things happened
because the default case wasn't sane. Both are corrected now.
1997-09-13 05:18:30 +00:00
b4ae3706db
Use the same indentation as other two place, sys_ptrace() and
...
procfs_control().
Ok'ed by Jason R. Thorpe.
1997-09-13 04:25:35 +00:00
4f7a116064
Add missing "break;" statements in the code that determines the
...
media setup by the Alpha SRM console software.
From Ross Harvey <ross@teraflop.com>.
1997-09-12 22:40:02 +00:00
8f33476972
Make console on multiport cards more likely to work (obvious bug,
...
fix still untested).
Closes PR kern/4095 by enami tsugutomo.
1997-09-12 13:31:10 +00:00
daf8124106
regen
1997-09-12 11:05:20 +00:00
e4c20d6210
another graphics chip...
1997-09-12 11:04:36 +00:00
d8f1d9401e
Adjust packet len in mbuf header for incoming broadcasts.
...
Closes PR kern/4087 (by myself).
1997-09-12 10:58:31 +00:00
a9155c5057
Set the status word as well, and remove a bogus comment.
1997-09-12 10:29:20 +00:00
78b5eb1f52
Create DMA maps on ordinary GUS (non-MAX) cards. Now it should work again.
1997-09-12 10:27:10 +00:00
701aa39854
Oops; didn't delete two retval[] usages in setregs().
1997-09-12 09:59:53 +00:00
cba224ed23
FPCOPROC is no longer used here.
1997-09-12 09:29:13 +00:00
4e5b47eba3
fputype is defined in locore.s now.
1997-09-12 09:27:49 +00:00
11393fe5b9
Add and use fputype. Optimize floating point save/restore routines a bit more
...
if only one CPU type is defined. Eliminate FPCOPROC. Merge some of the
68060 floating point stuff from the x68k port.
1997-09-12 09:25:36 +00:00
5933da103c
Add and use fputype. Optimize floating point save/restore routines a bit more
...
if only one CPU type is defined. Eliminate FPCOPROC.
1997-09-12 09:23:18 +00:00
27f2065c2c
Update syscall() and setregs() in the wake of the recent execve() changes.
1997-09-12 08:55:01 +00:00
cd9a968cb7
Fix a test that should be on fputype rather than cputype.
1997-09-12 08:41:55 +00:00
8a42aeac7b
GC old comment.
1997-09-12 08:35:15 +00:00
8a8fa1ee59
Eliminate some uses of FPCOPROC.
1997-09-12 08:19:00 +00:00
1192cdbe7e
FPCOPROC is already in the Makefile; no need for it here.
1997-09-12 08:14:06 +00:00
30073771b6
Move definition of FPCOPROC into the Makefile, since it's always required.
1997-09-12 08:13:26 +00:00
e9f392b0a9
Eliminate some uses of FPCOPROC.
1997-09-12 08:08:50 +00:00
55582e5bc2
The FPCOPROC option no longer exists.
1997-09-12 08:04:12 +00:00
49f0bbb105
Nuke Locore.c. It's way too out of date to be useful at this point.
1997-09-12 07:59:20 +00:00
895a1eced4
Fix an error from when Locore.c was removed.
1997-09-12 07:56:37 +00:00
50cfb2fcdd
Kill vestiges of Locore.c.
1997-09-12 07:55:17 +00:00
982f24e698
Always initialize all registers in setregs().
1997-09-12 07:00:30 +00:00
42c101eb00
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-12 05:48:08 +00:00
25f153bb22
Add fe0.
1997-09-12 05:22:55 +00:00
761c2e275a
Fix bogus comment.
1997-09-12 05:20:52 +00:00
73b4fdacad
Initialize all registers in setregs().
1997-09-12 05:01:09 +00:00
d0917c65e9
Add an ibcs2_setregs().
...
XXX Current implementation is a horrible kluge.
1997-09-11 23:07:25 +00:00
99a6404735
Add an ibcs2_setregs().
1997-09-11 23:05:30 +00:00
3f70f046fc
Fix wait(2) and waitpid(2) emulation; it's the responsibility of the syscall
...
stub to copy %edx to *status, and trying to do it here loses with some libc
versions.
1997-09-11 23:05:02 +00:00
16a8787248
Fix execve(2) and *setregs() interfaces so emulations can set registers in a
...
more correct way. (See tech-kern.)
1997-09-11 23:01:44 +00:00
44f6ba6c55
VM_MAX_ADDRESS is the user max address -- adjust
1997-09-11 14:01:07 +00:00
4658336eda
Add a 'reboot' command with a single parameter specifying the boot flags.
1997-09-11 06:55:56 +00:00
ae6bc354b9
Use the macro PC_ADVANCE(), if defined, to skip over a breakpoint.
1997-09-10 19:37:31 +00:00
aeec7a4ecc
Turn off "branch folding" in microsparc II processors. This seems to
...
avoid strange panics happening. Patch suggested by Chris Torek.
1997-09-10 19:11:23 +00:00
9f1374779b
Remove a comment that's incorrect since last commit.
1997-09-10 18:26:33 +00:00
b1fe1c2452
Generalize somewhat (now works for alpha too).
1997-09-10 16:25:07 +00:00
4fb8bf7262
PR/4098: Alan Barrett: Fix diagnostic printf formatting.
1997-09-10 13:44:20 +00:00
0310453204
The 501 uses 16 ports, and has a wider range of possible I/O address.
1997-09-10 05:40:23 +00:00
enami