Commit Graph

33 Commits

Author SHA1 Message Date
tsutsui
6aea963ed9 It seems the LAN Adapter on dreamcast actually uses slow 150ns SRAM,
so handle it properly by an additional quirk flag in sc_flags.

The problem was reported by Pat Wendorf on port-dreamcast, and
the fix was suggested and confirmed by Christian Groessler.
2003-02-05 12:03:54 +00:00
tsutsui
9604e7689d More cleanup of MI mb86960 driver:
- Add support for byte system bus mode. Based on patch in kern/17193 by
  Christian Groessler, with some improvements by me.
- Rename sc_flags in mb86960_softc to sc_stat, rename "type" to sc_flags
  to specify controller quirks and remove enum mb86960_type.
- Pass controller type via new sc_flags in mb86960_softc rather than
  via an mb86960_attach() arg.
- Handle unaligned mbufs properly in mb86960_write_mbufs(). (from ne2000.c)
- Fix a signed/unsigned comparision warning.
- Add definitions of status bits in the RX packed header.
- Change types of some members in mb86960_softc.
2002-11-30 14:15:10 +00:00
tsutsui
200406b07a Overhaul of fmv(4) driver:
- Split if_fmv.c into MI/MD part and add ISA-PnP attachment for FMV-183.
  (XXX FMV-184 is not tested. It would require extra media-select functions..)
- Fix probe functions of fmv_isa so that FMV-181A/182A will also match.
  Fixes port-i386/9476.
2002-10-05 15:16:10 +00:00
tsutsui
510762487a Allied-Telesyn AT-1700xT and Allied-Telesis RE200x are actually identical,
so show both names in attachment. (From FreeBSD's if_fe_isa.c)
2002-10-04 21:19:34 +00:00
tsutsui
fdedb8dbd6 - Merge dev/ic/ate_subr.c into dev/ic/mb86960.c since it only has EEPROM
read function which can also be used for other MB86965 based boards.
- Rewrite EEPROM read function as per 93C06 EEPROM datasheet.
- Misc cleanup.
2002-10-04 15:22:27 +00:00
tsutsui
4dc734d128 Remove unused FE_VERSION. 2002-09-28 18:02:21 +00:00
lukem
796f5b43a7 delint 2001-05-01 16:40:03 +00:00
jhawk
1e59d99d28 For all network drivers that call ether_ifattach(), and also
have _detach() functions:
  Ensure that softc keeps state about whether the attach succeeded,
  and make the detach function return immediately if the attach did
  not complete.
2000-05-29 17:37:12 +00:00
enami
a909d816d2 Add detach support. 2000-02-02 09:34:51 +00:00
thorpej
9caa955278 Use ETHER_*_LEN constants from <net/if_ether.h> instead of defining them
ourselves.  Subtract ETHER_CRC_LEN as necessary to get the same values
for these constants as were previously defined locally.
1999-03-25 23:19:16 +00:00
thorpej
1d0f24882d Now that the *_activate() functions don't do things which are attachment
specific, move them into the chipset drivers.
1998-11-18 18:34:52 +00:00
thorpej
dd6750820c Expose the "enable" and "disable" functions so that the front-ends can
access them.
1998-11-17 20:25:00 +00:00
enami
2b5f7351d2 Split Fujitsu MB9696x based ethernet card driver into bus
dependent/independent code and bus.h'fied.
1998-03-22 04:25:36 +00:00
thorpej
06ce220790 Update for config changes. 1998-01-12 09:39:57 +00:00
perry
fff05a68ab RCSID Police. 1998-01-05 07:31:05 +00:00
explorer
f9370ddc7a Add and/or update rnd_*() hooks 1997-10-15 05:55:13 +00:00
is
07b064e02e New ARP system, supports IPv4 over any hardware link.
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.

For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
thorpej
0211a3232d Appease the compiler: get rid of some unused variables, add some
prototypes, and suppress a bogus "might be used uninitialized" warning.
It's clear from reading the logic of the function that produces the
warning that the variable will not be used uninitialized, but the
compiler just isn't smart enough, I guess.  Marked XXX for future reference.
1996-10-17 04:34:08 +00:00
christos
86373f8cf9 backout kprintf changes 1996-10-13 01:37:04 +00:00
christos
58953408cb printf -> kprintf, sprintf -> ksprintf 1996-10-10 22:04:48 +00:00
mycroft
cec36bf8d5 Use intr.h. 1996-05-12 23:51:23 +00:00
thorpej
15354e899c Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit.  Updated interface to (*if_watchdog)() and (*if_reset)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:55:13 +00:00
cgd
51e85d07b9 update for addition of a machine-dependent cookie as the first argument
to isa_intr_{,dis}establish().
1996-04-11 22:27:59 +00:00
mycroft
740637ad71 If we dequeue a packet due to excessive collisions, make sure we check
to see if the queue length has dropped to 0.
1996-04-08 19:02:19 +00:00
thorpej
6d9ea4cf59 New device attachment scheme:
- split softc size and match/attach out from cfdriver into
	  a new struct cfattach.

	- new "attach" directive for files.*.  May specify the name of
	  the cfattach structure, so that devices may be easily attached
	  to parents with different autoconfiguration semantics.
1996-03-17 00:43:52 +00:00
mycroft
3da4b2a160 The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
mycroft
e4413d1a10 Fix another comment. 1995-08-07 14:26:51 +00:00
mycroft
f657f5bf3e Make this interface simplex. It's more efficient, and sidesteps the
problem of receiving our own multicasts in promiscuous mode.  Also, fix
some outdated comments.
1995-08-07 14:16:26 +00:00
mycroft
57528ce346 Init functions are always called at splimp(). 1995-07-23 20:36:51 +00:00
mycroft
465cfd15f0 Always use m_pkthdr.len on output. Panic if M_PKTHDR is not set. 1995-07-23 16:32:33 +00:00
cgd
2b71eae2c7 note that most of dev/ic's contents have changed names 1995-06-28 04:30:30 +00:00
mycroft
d9fc8ef092 Remove check for if_addrlist == 0; if_attach() always puts one address on
the list, so this is a noop.
1995-06-12 00:09:42 +00:00
mycroft
825d2fee22 Add Masahiro SEKIGUCHI's MB8696[05] driver, ported, with some additional
changes by me:
* Make autoconfiguration work correctly for more models of AT1700.
* Make the debugging code more robust and complete.
* Tweak the output routine for better performance, and to eliminate an ugly
kluge.
Various other style cleanup.  Needs more work.
1995-05-01 02:47:07 +00:00