Commit Graph

196 Commits

Author SHA1 Message Date
thorpej e3834cc351 Implement DIOCGDEFLABEL. 1997-10-08 23:37:50 +00:00
bouyer 6f3bab1f59 Merge scsipi branch in the mainline. This add support for ATAPI devices
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
1997-08-27 11:22:52 +00:00
leo c9f11609e3 According to Andre Lange, the Hades has the DTR/RTS lines exchanged on
the 68901 UART-port due to a PCB error. Take care of this.
1997-08-27 06:59:19 +00:00
leo d0301b58ee Don't enable the dma-interrupt while polling for dma to end. This sometimes
caused a system panic on the Hades while probing the SCSI devices.
1997-08-27 06:16:49 +00:00
leo 83c69491b2 Add second md device. 1997-07-30 15:45:33 +00:00
leo baa16e912c Rename lpt to lp on some places to avoid botches between files.isa and
files.atari.
1997-07-30 15:43:23 +00:00
leo b61a48cef7 Include 'locators.h' 1997-07-30 15:32:37 +00:00
jtk ca1bba150a use locator defines in "locators.h" to index cf_loc[] 1997-07-17 03:16:39 +00:00
jtk b4777471db use locator defines in "locators.h" to index cf_loc[] 1997-07-17 01:52:54 +00:00
leo de78b4c0e9 Garbage collect bell-ioctl's. 1997-07-15 06:48:05 +00:00
leo 1c21c4994d Make sure the card is probed once. 1997-07-09 14:38:02 +00:00
leo d4c5e4e6fe Add code to set pitch and duration of the keyboard bell. (Thomas Gerner). 1997-06-29 20:30:49 +00:00
leo b61541d6c2 Be consistent with more pedantic bus.h. 1997-06-25 12:15:54 +00:00
thorpej afe2bc9b9e In wdsize():
- If the partition is already open, skip the open/close step.  (Sync with
  other disk drivers).
- foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
  from the disklabel accordingly.
1997-06-24 00:41:29 +00:00
veego b04f321b06 s/atari_round_page/m68k_round_page/ 1997-06-10 18:45:05 +00:00
leo f42858310e Use m68k cacheops 1997-06-04 14:33:49 +00:00
leo c803f7baa9 Add serial driver for 68901 UART (modem1 port). 1997-05-25 12:41:27 +00:00
leo c05eddf7f5 Fix the 'shifting screens' bug on the Falcon. This solution is not perfect
since it gives a bit of flicker while switching frame buffers. From
Thomas Gerner.
1997-05-19 21:07:05 +00:00
leo 7c2c0c846c - Provide the reasonable size that can/may be mmap-ed. This might differ
from the current frame buffer size.
- The et-driver now allows for a 16Kb io-region (was 8Kb) that can be
  mapped. The XFree server uses this.
1997-04-25 19:25:38 +00:00
leo d5733f126e Allow formatting of 360Kb floppies. 1997-04-25 19:18:04 +00:00
leo 9c9b9aefc9 Make Hades DMA transfers work in polling mode with all interrupts
disabled. This makes dumps to scsi work.
1997-04-06 12:42:44 +00:00
leo ff152e48d5 The atari-TT really has no IDE-interface. 1997-04-02 20:33:10 +00:00
leo 061e737731 Add wd-driver. The driver is basically the driver present in the arm32
port (Thanks Mark!) with a few atari specific things and the bad block
handling disabled.
1997-04-01 08:17:44 +00:00
leo 67c47d4b56 Remove a hardcoded interrupt handler. Now uses intr_establish() for the
SCSI-drq handler on the Hades.
1997-03-30 21:08:19 +00:00
leo 103e8967c4 Add a space to the attach message. 1997-03-30 21:04:13 +00:00
leo e4a48696a6 Add member to bitmap struct that gives the size of mappable memory. 1997-03-13 12:37:08 +00:00
leo 7e288e08c3 Use vme_mask, not sys_mask to enable the SCC interrupt. 1997-03-10 14:41:43 +00:00
leo 60bde8d1ca Fix a kernel-dump that occurred when accessing a grf-device that was configured
in the config file but not found by the autoconfig code.
1997-02-26 12:28:40 +00:00
leo 5e2ca8918d Use generic date conversion module. 1997-02-26 12:26:36 +00:00
leo a6b3b4a841 Add option to sleep until ST_DMA becomes available. 1997-01-27 07:54:40 +00:00
leo 43795f8930 Don't set the PA_SER2 bit by default, this has the nasty side effect that
it disables the IDE hardware on the Falcon (Thanks Markus ;-) ). A function
is provided to toggle the bit.
1997-01-21 20:41:07 +00:00
leo 81fd2d7dc6 This should have been part of the keyboard-modifier changes. 1997-01-12 22:15:24 +00:00
leo 3e345f741d Use the mask register to block the interrups, not the enable register. This
enables the interrupt to be shared (with IDE for example ;-) ).
1997-01-12 15:46:37 +00:00
leo 4b8a9a883c Fix return value of the interrupt function. 1997-01-12 15:44:45 +00:00
leo 7a0c8fa119 Handle keyboard modifiers *before* handing the keycodes to either the
console driver or the DDB keyboard functions. This prevents annoyances
with out of sync modifier stati.
1997-01-10 21:24:25 +00:00
leo 2fa61d9691 Allow the control registers to be mapped too. 1997-01-10 21:00:36 +00:00
leo 1f4324fd52 Record physical addresses in the bitmap structure instead of VA's. The
latter breaks the mmap-functions.
1997-01-10 20:59:27 +00:00
leo d1538cb3c0 Don't try to init the keyboard interrupts in cngetc(). This caused the
keyboard to hang when booting directly into the debugger.
1997-01-08 11:28:03 +00:00
leo 0713c0ee88 Fix a rather nasty thinko that made the keyboard useless on the Falcon.
Thanks to Markus Kilbinger for finding it.
1997-01-04 23:30:21 +00:00
leo 54608785fb The ST-DMA driver now uses intr_establish. 1997-01-01 21:14:47 +00:00
leo 493e4aaebb The Hades floppy driver now uses intr_establish(). Also the interrupt
accounting is fixed (ie. counted as the right interrupt).
1997-01-01 21:12:56 +00:00
pk c4a0dfb011 omission in last commit: ramdisk.h => md.h 1996-12-28 23:50:44 +00:00
pk a8b4babc16 rename: ramdisk => md 1996-12-28 23:37:26 +00:00
leo 223682435b Oops, this one was missed in the BROKEN_INDIRECT_CONFIG cruisade. 1996-12-28 23:26:36 +00:00
leo c4b08fe059 Add intr_establish/disestablish functions. Currently only the lpt-driver
is converted to use them...
1996-12-26 23:25:01 +00:00
leo c6e901c459 Get rid of BROKEN_INDIRECT_CONFIG 1996-12-20 16:20:57 +00:00
leo 291ced55a4 Get rid of BROKEN_INDIRECT_CONFIG 1996-12-20 12:49:35 +00:00
leo 421158437b Tweak the clockframe structure a bit so we are able to save a few cycles
at interrupt time. (From Gordon Ross).
1996-12-18 12:35:19 +00:00
leo 9f8a5d9694 Move up the initialisations for the delay routine in the initialisation
process. It's now also available to the different device probes.
1996-12-16 22:03:23 +00:00
leo de3b8c8e4b Implement an rtc-device. Credits for the idea goes to Wolfgang Solfrank.
Because there is no way yet to tell init(1) to execute commands before
single user-mode is entered, the inittodr() function is still partly
functional. It retrieves the value of the RTC and sets the time as if
the RTC was running at UTC. The resettodr() function is a No-Op. The
RTC can only be changed by a write to /dev/rtc.
The TIMEZONE and DST options are no longer needed and removed from the
config files.
1996-12-16 21:24:00 +00:00