userland part of PR kern/44952 by Wolfgang Stukenbrock, just changed
the "frag" option name to "esp_frag", for consistency to the existing
option of similar effect in racoon(8)
-rev.21964 for DTLS Plaintext Recovery Attack (CVE-2011-4108)
-rev.21961 for Uninitialized SSL 3.0 Padding (CVE-2011-4576)
-rev.21456+21954 for Malformed RFC 3779 Data Can Cause Assertion Failures
(CVE-2011-4577)
(rev.21456 is not mentioned in the advisory, but there is code overlap)
-rev.21958 for SGC Restart DoS Attack (CVE-2011-4619)
-rev.21956 for Invalid GOST parameters DoS Attack (CVE-2012-0027)
ipsec_*_policy() functions, as it was documented and used by clients
-remove "ipsec_policy_t" which was undocumented and only present
in the KAME version of the ipsec.h header
-misc cleanup of historical artefacts, and to remove unnecessary
differences between KAME ans FAST_IPSEC
resultant key listing
when using json to format keys returned from libnetpgp, also prepare for
machine-readable format ("mr") as well as human ("human"), even though
it's not yet used.
our version of GNU as decides to silently ignore it. Never versions on
other systems and Clang actually keep it around and create bad object
files. The object files are identical after the changes modulo the GOT
entry in the symbol table.
the "rep ret" trick is recommended by AMD as a branch prediction
optimization in certain circumstances (quoting their manual):
- any kind of branch (either conditional or unconditional) that has the
single-byte near-return RET instruction as its target
- a conditional branch that occurs in the code directly before the
single-byte near-return RET instruction.
Somewhere in this mess of .byte streams, corruption happens. Disassembly
only shows slightly different filling of alignment sequences, further
analysis is needed.
XXX This should be rewritten to be proper assembler code
when initialising, recognise keys in a different order.
1. read the public keyring
2. if a userid has been specified, use it
3. if not, check the configuration file (~/.gnupg/gpg.conf) for a
default user id
4, only read the secret keyring if we need to (decrypting or signing)
5. if signing, and we still don't have a userid, use the first key in
the secret keyring
6. if encrypting, and we still have no userid, use the first in the
public keyring
ssh keys remain the same as previously.
denoting its length. this allows binary strings to be encoded using
libmj.
escape magic characters in json strings in a more efficient manner.
the previous method was not scalable.
update callers to suit
bump libmj major version number
add examples to the libmj(3) man page
this is sort of a sidegrade onto the release branch. Changes against the
last version imported:
*) Backport libcrypto audit of return value checking from HEAD, not
all cases can be covered as some introduce binary incompatibilities.
[Steve Henson]
*) Redirect RSA operations to FIPS module including keygen,
encrypt, decrypt, sign and verify. Block use of non FIPS RSA methods.
[Steve Henson]
*) Add similar low level API blocking to ciphers.
[Steve Henson]
*) Low level digest APIs are not approved in FIPS mode: any attempt
to use these will cause a fatal error. Applications that *really* want
to use them can use the private_* version instead.
[Steve Henson]
*) Redirect cipher operations to FIPS module for FIPS builds.
[Steve Henson]
*) Redirect digest operations to FIPS module for FIPS builds.
[Steve Henson]
*) Update build system to add "fips" flag which will link in fipscanister.o
for static and shared library builds embedding a signature if needed.
[Steve Henson]
*) Output TLS supported curves in preference order instead of numerical
order. This is currently hardcoded for the highest order curves first.
This should be configurable so applications can judge speed vs strength.
[Steve Henson]
*) Add protection against ECDSA timing attacks as mentioned in the paper
by Billy Bob Brumley and Nicola Tuveri, see:
http://eprint.iacr.org/2011/232.pdf
[Billy Bob Brumley and Nicola Tuveri]
*) Add TLS v1.2 server support for client authentication.
[Steve Henson]
*) Add support for FIPS mode in ssl library: disable SSLv3, non-FIPS ciphers
and enable MD5.
[Steve Henson]
*) Functions FIPS_mode_set() and FIPS_mode() which call the underlying
FIPS modules versions.
[Steve Henson]
*) Add TLS v1.2 client side support for client authentication. Keep cache
of handshake records longer as we don't know the hash algorithm to use
until after the certificate request message is received.
[Steve Henson]
*) Initial TLS v1.2 client support. Add a default signature algorithms
extension including all the algorithms we support. Parse new signature
format in client key exchange. Relax some ECC signing restrictions for
TLS v1.2 as indicated in RFC5246.
[Steve Henson]
*) Add server support for TLS v1.2 signature algorithms extension. Switch
to new signature format when needed using client digest preference.
All server ciphersuites should now work correctly in TLS v1.2. No client
support yet and no support for client certificates.
[Steve Henson]
*) Initial TLS v1.2 support. Add new SHA256 digest to ssl code, switch
to SHA256 for PRF when using TLS v1.2 and later. Add new SHA256 based
ciphersuites. At present only RSA key exchange ciphersuites work with
TLS v1.2. Add new option for TLS v1.2 replacing the old and obsolete
SSL_OP_PKCS1_CHECK flags with SSL_OP_NO_TLSv1_2. New TLSv1.2 methods
and version checking.
[Steve Henson]
*) New option OPENSSL_NO_SSL_INTERN. If an application can be compiled
with this defined it will not be affected by any changes to ssl internal
structures. Add several utility functions to allow openssl application
to work with OPENSSL_NO_SSL_INTERN defined.
[Steve Henson]
*) Add SRP support.
[Tom Wu <tjw@cs.stanford.edu> and Ben Laurie]
*) Add functions to copy EVP_PKEY_METHOD and retrieve flags and id.
[Steve Henson]
*) Add EC_GFp_nistp224_method(), a 64-bit optimized implementation for
elliptic curve NIST-P224 with constant-time single point multiplication on
typical inputs. EC_GROUP_new_by_curve_name() will automatically use this
(while EC_GROUP_new_curve_GFp() currently won't and prefers the more
flexible implementations).
The implementation requires support for the nonstandard type __uint128_t,
and so is disabled by default. To include this in your build of OpenSSL,
use -DEC_NISTP224_64_GCC_128 on the Configure (or config) command line,
and run "make depend" (or "make update").
[Emilia K<E4>sper <emilia.kasper@esat.kuleuven.be> (Google)]
*) Permit abbreviated handshakes when renegotiating using the function
SSL_renegotiate_abbreviated().
[Robin Seggelmann <seggelmann@fh-muenster.de>]
*) Add call to ENGINE_register_all_complete() to
ENGINE_load_builtin_engines(), so some implementations get used
automatically instead of needing explicit application support.
[Steve Henson]
*) Add support for TLS key exporter as described in RFC5705.
[Robin Seggelmann <seggelmann@fh-muenster.de>, Steve Henson]
This is still somewhat experimental. Tested between 2 similar boxes
so far. There is much potential for performance improvement. For now,
I've changed the gmac code to accept any data alignment, as the "char *"
pointer suggests. As the code is practically used, 32-bit alignment
can be assumed, at the cost of data copies. I don't know whether
bytewise access or copies are worse performance-wise. For efficient
implementations using SSE2 instructions on x86, even stricter
alignment requirements might arise.
Push -Wno-array-bounds down to the cases that depend on it.
Selectively disable warnings for 3rd party software or non-trivial
issues to be reviewed later to get clang -Werror to build most of the
tree.
sun2 port to proceed beyond trying and failing to build Heimdal.
This is done by:
1) Stop pretending that libipc is a separate library, and instead
build it as part of libkrb5. The version map for libkrb5 needed
to be updated to expose the required symbols from libipc.
2) The lexer in libhx509 needs to use its own prefix, so that the
resulting library can be statically linked with a lexer which
uses the default prefix. This was hidden because libhx509's
version map file (which is only used for the shared libs) hid
away the lexer symbols. Some defines needed tweaking as well
to restore buildability.
3) Excplicitly mention all the required libraries in LDADD+= and
make sure DPADD is set to correspond. This allows static linking;
earlier this relied on shared library dependencies to have all the
libs pulled in. In the process, convert to single-line LDADD+=
and DPADD+= settings. Use Makefile.inc for the common libraries
to the extent possible.
Successfully built from scratch for i386 and sun2 several times,
and for lots of other ports as well.
Discussed with elric@ and christos@.
to get the krb5 GSS functions. gssapi/gssapi_krb5.h should be included.
[this is necesary for the next Heimdal upgrade as krb5.h inclusion is no
longer effective.]
revision 1.11
date: 2010/04/02 15:25:04; author: christos; state: Exp;
make it obvious to grep that ctime is being checked.
and
revision 1.10
date: 2010/04/02 15:23:17; author: christos; state: Exp;
handle ctime returning NULL.
revision 1.7
date: 2010/01/24 16:45:57; author: christos; state: Exp;
make the window size function return the lines and columns
variables separately instead of depending on the existance
of struct winsize. Technically I should bump the library
version or version the symbol, but nothing seems to use
this outside the library!
We should review this logic and come up with a better way to do this as
now that there are DNS SRV RRs for locating KDCs, the lack of a config
does not imply that Kerberos should be turned off.
Instead, document saslc_sess_getmech().
* Add FUNCTIONS and describe the functions in a list for readability.
* Sort SYNOPSIS in the order of appearance in FUNCTIONS.
* Split couple of long paragraphs for readability.
* Split the code example into EXAMPLES.
* Add missing prototypes to SYNOPSIS.
* Small markup improvements.
No contextual change.
define to make it more obvious what is the intended action. One more
return value is also added, to fix comparison of security policy
descriptors. Namely, getsp() should not allow wildcard matching (as the
comment says, it does exact matching) - otherwise we get problems when
kernel has generic policy with no ports, and a second similar policy with
ports.
for weak references. GCC 4.2+ and Clang require static, older GCC wants
extern. Change __weak_reference to include sym. This requires changes
the existing users to not reuse the name of the symbol, but avoids
further differences between GCC 4.1 and GCC 4.2+/clang.
SASLC_PROP_SERVICENAME ("SERVICENAME")
to
SASLC_PROP_SERVNAME ("SERVNAME")
Hopefully this will avoid confusion with SASLC_PROP_SERVICE ("SERVICE").
SERVNAME is also closer to the name used in the RFC2831 ("serv-name").
(Discussed with christos@.)
Change the hash parameters to keep that collision-less after the above
name change.
While here, go back to using .Sh in the manpage for unknown section
headers as the PostScript output from .Ss is slightly different.
(Discussed with wiz@.)
1) Fix a memory leak in cipher_context_create().
2) Fix a goof in the construction of the digest-uri.
3) Allow SASLC_PROP_SERVICENAME to be a hostname qualified comma
delimited list of service names to select from and update the manpage
to reflect this.
4) Make libsaslc.3 pass mdoclint(1).
