Commit Graph

20108 Commits

Author SHA1 Message Date
mhitch 7984f5ce3a The scsi command length was not being set in rz_command(), which caused
the SII driver to fail when trying to get the drive geometry.
Remove extraneous newline when printing out the disk geometry during device
probes.
1997-11-13 03:56:49 +00:00
mycroft 4f8b60c6bb Implement the BSDI kluge for the Pentium `hang'; leave the first 7 IDT
descriptors in an unmapped page, and patch up the trap information inside
the page fault handler if the faulting VA is inside the IDT.
1997-11-13 03:25:27 +00:00
mycroft 6a310175c6 Some general cleanup:
* Call gdt_init() earlier on.
* Don't bother to check for TSS and LDT descriptors in verr_gdt().
* Nuke the sti special case for trace and breakpoint traps.
* Move some variable declarations into more appropriate locations.
1997-11-13 03:16:42 +00:00
thorpej ce4c770f88 Make sure CPP, AR, AS, and RANLIB are defined. 1997-11-12 23:11:50 +00:00
thorpej a421995756 Define LORDER, NM, and TSORT here, like we do the rest of the tools. 1997-11-12 22:25:31 +00:00
pk ff4f5f4528 If necessary, defer console output until TX interrupt handler runs. 1997-11-12 22:18:54 +00:00
pk 39879b883e Use a 1-character queue so polled console output can be deferred if
regular I/O has been scheduled.
1997-11-12 22:17:07 +00:00
augustss dd95190002 XXX Workaround for ViBRA cards with two 8 bit DMA channels. 1997-11-12 20:28:42 +00:00
pk a309481f34 Change load address to avoid cache-aliasing on machines with Harvard-style
cache implementations (notably the Hypersparcs).
1997-11-12 00:37:07 +00:00
fvdl db0d6c4018 Add missing ; 1997-11-11 22:43:51 +00:00
kml 3b9fc85803 Remove an extraneous call to rtfree() in the path mtu discovery code;
this was causing negative reference counts on routes...
1997-11-11 21:10:50 +00:00
drochner b80ad6c934 -point to console(4) manpage for serial console parameters
(suggested by Chuck Cranor)
-insert a reasonable IO base address for "iy at isa"
 (from Ignatios Souvatzis)
1997-11-11 20:31:38 +00:00
scottr d28cbedf2f Fix typo in last change that causes lossage depending on
whether the MRG_ADB option is used or not.
1997-11-11 17:31:11 +00:00
mhitch c390c7a5e1 The address used by mips1_FlushICache() is a virtual address, not a physical
address.  This caused DDB to hang the machine hard when trying to set a
breakpoint.
1997-11-11 16:50:57 +00:00
thorpej b6ac221d7c Type/alignment cleanup in EEPROM code. 1997-11-11 06:35:46 +00:00
thorpej 6fcc8cd8b1 Add locators for "eg0" device, and enable it. 1997-11-11 05:53:06 +00:00
jonathan b8636b832f chipset driver for DEC pixelstamp and STIC (stamp Interface chip). 1997-11-11 04:47:57 +00:00
is 9360bfcc81 Remove remnants from ISA com console attachment code, which caused, due
to missing variable initialization, a panic on the DraCo.
1997-11-10 22:29:03 +00:00
ragge 7b60c8ed11 Fix multivolume installation bug; PR#4454. 1997-11-10 22:14:16 +00:00
mhitch b0367937cb Fix typo: NRASTERRCONSOLE -> NRASTERCONSOLE 1997-11-10 21:59:18 +00:00
pk 85524f37b3 Set `dvma_cachealign' on Hypersparc. 1997-11-10 21:20:07 +00:00
mjacob 479bc8877c Protect userland applications from the inline splraise function. 1997-11-10 18:23:50 +00:00
is ff1fd132f3 Forgot this yestereve: s/CV64CONSOLE/CV3DCONSOLE/ 1997-11-10 12:17:20 +00:00
jonathan 9dee06e184 Add px placebo driver to standard pmax options. 1997-11-10 08:26:33 +00:00
mycroft 402ecc3fed Clean up code from last commit. 1997-11-10 08:26:09 +00:00
phil b9b9e9752b Remove comment on bim.8 man page. 1997-11-10 01:58:10 +00:00
phil 29bc127e91 Remove unknown .even, complete a string in a macro call. 1997-11-10 01:50:25 +00:00
is f31e12d69d - recognize CV3D in Zorro-II mode.
- use board address space > 4 MB, instead of iszthreepa(), to detect Z3-mode
  boards. We dont want the bus, but want the address configuration.
- s/CV64CONSOLE/CV3DCONSOLE/
- s/cv3d_zorroIII == 1/cv3d_zorroIII/ and s/cv3d_zorroIII != 1/!cv3d_zorroIII/
1997-11-09 23:30:47 +00:00
scottr a41bde2076 Get rid of MSGBUFPTECNT; fixes PR 4331. 1997-11-09 06:10:44 +00:00
jonathan c176a3646e Fix kernel divide-by-zero errors and other bugs with removable devices:
* Add code to query CDs for size, from MI scsi cd.c. Use it on CDs.
  * Set C partition size for CDs. 4.4bsd/pmax code only set `a' partition
    size and required users to mount `a' partition, breking raw-device
    access like "disklabel rz?".
  * Avoid possible divide-by-zero call to howmany() from rzstart(),
    on removable media that aren't ready at device-open time.

Verified to work on rrz42.
1997-11-09 03:08:23 +00:00
jonathan 9e1d749da4 Initialize nfs_boot_rfc_951 to 1. Makes pmax kernels to use bootp,
not RARP/bootparams, to get diskless-boot config info.
Decstation PROMs already use BOOTP so we lose nothing.
1997-11-09 02:03:50 +00:00
scottr 60dd653baa KNF: Fix some whitespace inconsistencies. 1997-11-08 23:22:38 +00:00
jonathan 0f41aef4b9 Workaround for port-pmax/4438 (pmax kernel glass-tty console code is broken)
until a proper fix is available:
  Perpetuate the 4.4bsd design even further. Change keyboard-driver
  open routines to check for an active raster console. If active, set the
  keyboard struct tty's t_winsize from the rcons t_winsize on first open.
See pr 4438 for remaining problems and discussion of a complete fix.
1997-11-08 21:55:05 +00:00
ws f1be2b6fac Fix lossage with diroffset handling in root dir 1997-11-08 19:18:57 +00:00
jonathan 1dfe80f178 Add MODE SENSE code from MI scsi sd.c to rz.c.
* add includes for sys/dev/scsipi headers.
 * cut-and-paste mode_sense and disk-geometry sense code from sd.c,
   with name changes sd -> rz.
 * Write `rz_command()' to send SCSI sense commands based on
   existing rz size-sensing code.
 * get geometry info with page 4 and page 5 mode sense.
 * use resulting geom info for default label, fake label, and when
   using ultrix labels. (ultrix labels have no geometry info).

Fixes incrrect-label bugs with using sysinst to install onto
Ultrix-labelled disks.
1997-11-08 11:28:10 +00:00
jonathan 0bdc6f10b9 Commit `pacifier' driver for turbochannel PMAG-C option card:n
just acknowledge interrupts from the PMAG-C.
1997-11-08 07:27:49 +00:00
jonathan fbac6ffd1b Delete ancient warning printf() from when this code hadn't been
tested on  3MIN or MAXINE motherboards.  Add __KERNEL_RSID while we're here.
1997-11-08 07:15:35 +00:00
thorpej ec43979ba3 Properly determine the default media on '790-based cards. 1997-11-08 06:13:53 +00:00
gwr 5eda2e37e8 Oops...(pasto) 1997-11-08 05:42:07 +00:00
briggs 527e5cbc44 Force the probe to find the internal video for the 63x/575 models. 1997-11-08 04:12:52 +00:00
kml 86275dc497 TCP MSS fixes to provide cleaner slow-start and recovery. 1997-11-08 02:35:22 +00:00
gwr 924c57cce0 Disable DMA and interrupts for now (via se_options). 1997-11-07 22:11:19 +00:00
mjacob c2845107f1 If we're in the middle of opening, don't let st_interpret_sense get
into the act and return EIO or whatever when we're just eating the
initial TEST UNIT READY induced check condition.
1997-11-07 18:16:23 +00:00
drochner 23e7d0a259 Adjust comment for new default fragment table size. 1997-11-07 17:01:45 +00:00
drochner 4ad496626c Double default fragment table size. For fragmented and / or small
blocksize filesystems the old default was too small.
1997-11-07 16:59:41 +00:00
briggs c1ed70f0d8 NetBSD RCSIds. 1997-11-07 13:31:15 +00:00
enami 140159fa85 Add the missing attribute `dp8390nic' for the device `we'. 1997-11-07 13:08:23 +00:00
scottr a6c6c9c1ad Update from John Wittkoski: work around problem with mice that claim to
support Extended Mouse Protocol, but really don't; the Logitech Mouseman
is one such mouse (model M-AC13-4MD).
1997-11-07 07:38:10 +00:00
scottr 13fa4227b1 Update from John Wittkoski: bug fixes for Cuda support. 1997-11-07 07:33:11 +00:00
mark ae0af9300a Fix a bug in irq_release() when searching interrupt list for the handler
to remove. The address of the pointer rather than the address of what
is pointed to was use to track the previous handler resulting in problems
when releasing a chained irq. (from John Ballance)
1997-11-07 01:04:51 +00:00