Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
223,988 Commits 606 Branches 0 Tags 3.1 GiB
0bc28762a3
Commit Graph

31022 Commits

Author SHA1 Message Date
mlelstv
0bc28762a3 add function to detach wscons from a console. This allows to 
switch the console to a different driver.
 2014-01-21 00:08:27 +00:00
jdc
27e697cae2 Remove the check for (cmdlen > 0) when writing. When i2cscan sends a 
quick_write, the command length is 0, so we were previously returning
success for every address in this case.
 2014-01-20 22:02:32 +00:00
msaitoh
152fffcfb5 Fix a bug that EG20T's UARTs from #1 to #3 never match. 
Tested with my MinnowBoard.
 2014-01-20 01:10:38 +00:00
bouyer
d59207e222 Request a 80x25 tty emulation, which is more likely to work than 80x30 
on a 640x400 VGA.
 2014-01-18 19:24:46 +00:00
apb
b29660a1ad + Please also update ACPI_DATE in include/acapps.h. 2014-01-18 09:51:08 +00:00
dsl
5dae941417 Add another XXX comment, I'm not in a postition to fix the code. 
The 'cycle' bit of a LINK trb must not be changed until the cycle bit
of the following trb has been set.
 2014-01-16 20:55:56 +00:00
jakllsch
edc30bfbd4 Fix PR kern/46376 with Nat Sloss's patch (with slight modification). 
Serial console now works on x86 with genfb enabled.
 2014-01-16 18:41:10 +00:00
macallan
5357cde09e cap mappable framebuffer size at 64MB before dividing it up for each output 
now we can actually access the 2nd fb on boards with more than 64MB VRAM
 2014-01-14 09:46:42 +00:00
macallan
2ff97689e1 - move cursor area to the end of each display's chunk of fb RAM 
- use memory between display and cursor as glyph cache instead of blindly
  trying to use 8MB
should fix PR 48492
 2014-01-14 01:35:13 +00:00
macallan
86e9be6a98 try not to crash when calling glyphcache_wipe() on an uninitialized cache 
first step to fix PR 48492
 2014-01-13 19:30:33 +00:00
reinoud
0e492f7c8d Regen 2014-01-13 08:24:17 +00:00
reinoud
4e9ecc3794 Add Atmel's SAM-BA programming port as found on Atmel's SAM3E (ARM CortexM3) 
boards
 2014-01-13 08:23:58 +00:00
reinoud
680415d3af Regen 2014-01-13 08:22:07 +00:00
reinoud
39e8846521 Add Future Bits as vendor code 
Add Atmel SAM3E based microcontroller board "4Pi" by Future Bits
 2014-01-13 08:21:41 +00:00
jakllsch
e45cb093f5 KASSERT that cmd is non-NULL in more places, and in a place that previously 
did not use KASSERT to do the same thing.
 2014-01-11 20:29:03 +00:00
jakllsch
056e4dba49 Do not take data from the controller in interrupt handler if we are polling. 2014-01-11 20:17:56 +00:00
msaitoh
5010e7e4fc Sync with pcidev's change. Rename PCI_PRODUCT_MARVELL2_88SE9128 to 
PCI_PRODUCT_MARVELL2_88SE912Z. No functional change.
 2014-01-10 01:43:52 +00:00
msaitoh
9fecef6533 regen. 2014-01-10 01:42:20 +00:00
msaitoh
4165b90127 Rework for Marvell 88SE9128. Change the description of 0x9123 to 
88SE912[38]. For 0x91a3, add '(unclear)' into the description.
FreeBSD, Linux and http://pci-ids.ucw.cz have no such device.
 2014-01-10 01:39:48 +00:00
christos
9682229fe5 regen 2014-01-09 22:37:44 +00:00
christos
07a9cab707 revert unintended changes 2014-01-09 22:37:18 +00:00
htodd
886ddaff87 Fix build. Only compile tested. 2014-01-09 21:14:53 +00:00
msaitoh
9a75aee207 regen. 2014-01-09 17:28:30 +00:00
msaitoh
b22423017d Remove 88SE9128(0x913a) entry. At least one of 88SE9128 chip's 
product ID is 0x9123. I have this one. Add new 88SE912X entry
with 0x9123. OK'ed by jakllsch.
 2014-01-09 17:28:05 +00:00
mlelstv
8aa54a5db6 add three temperature sensors from ST. 2014-01-09 16:51:05 +00:00
jakllsch
7f23e64fd1 Fix whitespace issues. 2014-01-08 16:49:48 +00:00
jakllsch
8b3ffd0418 Add unused tps65217pmic_reg_write() function. 2014-01-08 16:45:14 +00:00
msaitoh
4737180880 Insert completion barrier between register write and delay(). 
One exception is chip reset (to avoid hangup).
 2014-01-07 13:14:39 +00:00
macallan
4a4332fa68 __unuse the right function 
( note to self - don't commit half asleep )
 2014-01-04 16:37:05 +00:00
msaitoh
1d1c89224b regen. 2014-01-04 02:57:50 +00:00
msaitoh
af1b92eef3 Add Intel Z68 LPC 2014-01-04 02:57:27 +00:00
pgoyette
1c14899110 Modularize 2014-01-03 16:09:22 +00:00
pgoyette
ff65229f7e If you're going to build this driver as a module, make sure that it 
depends on opencrypto module.
 2014-01-03 16:07:27 +00:00
macallan
e1cc895ece do as joerg requested and mark an unused function __unused 2014-01-03 15:57:12 +00:00
msaitoh
b20d0e739e regen. 2014-01-01 08:33:31 +00:00
msaitoh
9d4e4bce46 Change description from ASPEED2000 to ASPEED Graphics Family because 
the IP is used on AST1000,2050 and 2100, too.
 2014-01-01 08:33:00 +00:00
skrll
3546eea784 Remove unused variable. 
OK rkujawa
 2013-12-31 14:51:46 +00:00
msaitoh
a86fd0ccac regen. 2013-12-30 07:08:47 +00:00
msaitoh
a9e0b043d1 Add ASPEED AST2000. 2013-12-30 07:08:24 +00:00
msaitoh
bcf70d1755 Add support For I354(C2000 interna Ethernet controller): 
- Add I354 support.
 - Fix SGMII+MDIO case. SGMII+I2C is not supported yet.
 - Not tested well.
 - Sprinkle "XXX" to check later.
 2013-12-29 21:28:41 +00:00
pgoyette
1b0023ef9a Modularize net/zlib so it can be used by the vnd module (and, eventually, 
by an opencrypto module).
 2013-12-29 08:09:44 +00:00
pgoyette
8682ae0dd0 ccd module also needs dk_subr 2013-12-28 19:44:41 +00:00
pgoyette
e5a29159a9 Make dksubr.c into a module, and make the cgd and dm modules depend on 
it.

Now that cgd is completely modularized, descend into modules/cgd to
actually create the module.
 2013-12-28 19:25:07 +00:00
msaitoh
575d9f62e6 Add Intel C2000 PCU SMBus 2013-12-28 11:15:43 +00:00
christos
6865ff7222 use ACPI_DEBUG not ACPI_DEBUGGER which is used internally by acpica 2013-12-27 20:55:59 +00:00
christos
0a1a7e4862 Add new functions 2013-12-27 18:53:25 +00:00
christos
e9e92000ab - remove function list that was out of date 
- explain magical munging so that people are not scared to update in the future.
 2013-12-27 18:53:16 +00:00
christos
a76e346af4 function argument changed width 2013-12-27 18:52:16 +00:00
christos
5b339ad5cf constant changed name 2013-12-27 18:51:44 +00:00
msaitoh
6985a537b1 regen. 2013-12-27 08:40:28 +00:00