knew what it was supposed to be used for and wrstuden gave a go-ahead
* while rototilling, convert file systems which went easily to
use VFS_PROTOS() instead of manually prototyping the methods
fs code is a kernel buffer, pass though the length of the buffer as well.
Since the length of the userspace buffer isn'it (yet) passed through the mount
system call, add a field to the vfsops structure containing the default length.
Split sys_mount() for calls from compat code.
Ride one of the recent kernel version changes - old fs LKMs will load, but
sys_mount() will reject any attempt to use them.
an init method. So get rid of it and #ifdef _LKM and just always
init in the init method. Give malloc types the same treatment.
Makes file systems nicer to work with in linksetless environments
and fixes a few LKM discrepancies.
workaround for the problem analyzed more deeply in kern/30831. In
short, the problem is keeping the vnode on the mount point vnode
list during reclaim. If reclaim happens to sleep (as is a possibility
with smbfs due to calling vrele() and therefore possibly VOP_INACTIVE),
code going through the entire mountpoint vnode list will hit
half-reclaimed vnodes.
The suspension helpers are now put into file system specific operations.
This means every file system not supporting these helpers cannot be suspended
and therefore snapshots are no longer possible.
Implemented for file systems of type ffs.
The new API is enabled on a kernel option NEWVNGATE. This option is
not enabled by default in any kernel config.
Presented and discussed on tech-kern with much input from
Bill Studenmund <wrstuden@netbsd.org> and YAMAMOTO Takashi <yamt@netbsd.org>.
Welcome to 4.99.9 (new vfs op vfs_suspendctl).
- LOCKPARENT is no longer relevant for lookup(), relookup() or VOP_LOOKUP().
these now always return the parent vnode locked. namei() works as before.
lookup() and various other paths no longer acquire vnode locks in the
wrong order via vrele(). fixes PR 32535.
as a nice side effect, path lookup is also up to 25% faster.
- the above allows us to get rid of PDIRUNLOCK.
- also get rid of WANTPARENT (just use LOCKPARENT and unlock it).
- remove an assumption in layer_node_find() that all file systems implement
a recursive VOP_LOCK() (unionfs doesn't).
- require that all file systems supply vfs_vptofh and vfs_fhtovp routines.
fill in eopnotsupp() for file systems that don't support being exported
and remove the checks for NULL. (layerfs calls these without checking.)
- in union_lookup1(), don't change refcounts in the ISDOTDOT case, just
adjust which vnode is locked. fixes PR 33374.
- apply fixes for ufs_rename() from ufs_vnops.c rev. 1.61 to ext2fs_rename().
reference to the parent directory's vnode instead of its smbnode to
avoid a use-after-free bug causing a panic when a smbfs mount is
forcefully unmounted.
Keep trying to flush the vnode list for the mount while some are still
busy and we are making progress towards making them not busy. This
stops attempts to unmount idle smbfs mounts failing with EBUSY.
The easiest way to reproduce the above problem, from what I have seen is:
1) Assume /s is a smbfs mount point.
2) mount /s
3) stat /s/foo/1
4) umount /s
Returns error because the file system is busy.
5) Shutdown the machine: panic in smbfs_reclaim because vrele
accesses already-released memory.
loops where vnodes can get removed or added during the loops. This could
lead to panic's on unmount since nodes are skipped or otherwise
TAILQ_NEXT(0xdeadbeef, ...) was dereferenced.
vnodes were synced and processed backwards. This meant that the last
accessed node was processed first and the earlierst last.
An extra benefit is the removal of the ugly hack from the Berkly days on
LFS.
In the proces, i've also replaced the various variations hand written loops
by the TAILQ_FOREACH() macro's.
- Remove all NFS related stuff from file system specific code.
- Drop the vfs_checkexp hook and generalize it in the new nfs_check_export
function, thus removing redundancy from all file systems.
- Move all NFS export-related stuff from kern/vfs_subr.c to the new
file sys/nfs/nfs_export.c. The former was becoming large and its code
is always compiled, regardless of the build options. Using the latter,
the code is only compiled in when NFSSERVER is enabled. While doing this,
also make some functions in nfs_subs.c conditional to NFSSERVER.
- Add a new command in nfssvc(2), called NFSSVC_SETEXPORTSLIST, that takes a
path and a set of export entries. At the moment it can only clear the
exports list or append entries, one by one, but it is done in a way that
allows setting the whole set of entries atomically in the future (see the
comment in mountd_set_exports_list or in doc/TODO).
- Change mountd(8) to use the nfssvc(2) system call instead of mount(2) so
that it becomes file system agnostic. In fact, all this whole thing was
done to remove a 'XXX' block from this utility!
- Change the mount*, newfs and fsck* userland utilities to not deal with NFS
exports initialization; done internally by the kernel when initializing
the NFS support for each file system.
- Implement an interface for VFS (called VFS hooks) so that several kernel
subsystems can run arbitrary code upon receipt of specific VFS events.
At the moment, this only provides support for unmount and is used to
destroy NFS exports lists from the file systems being unmounted, though it
has room for extension.
Thanks go to yamt@, chs@, thorpej@, wrstuden@ and others for their comments
and advice in the development of this patch.
The __UNCONST macro is now used only where necessary and the RW macros
are gone. Most of the changes here are consumers of the
sysctl_createv(9) interface that now takes a pair of const pointers
which used not to be.
into the "vfsops" link set.
- Use VFS_ATTACH() where vfsops are declared for individual file systems.
- In vfsinit(), traverse the "vfsops" link set, rather than vfs_list_initial[].
for easier maintenance; the decision to use either
SMB_TRANS2_QUERY_FS_INFORMATION or SMB_COM_QUERY_INFORMATION_DISK
is done inside it, the code for populating struct statvfs with values
is shared
- Not enabled by default. Needs kernel option FFS_SNAPSHOT.
- Change parameters of ffs_blkfree.
- Let the copy-on-write functions return an error so spec_strategy
may fail if the copy-on-write fails.
- Change genfs_*lock*() to use vp->v_vnlock instead of &vp->v_lock.
- Add flag B_METAONLY to VOP_BALLOC to return indirect block buffer.
- Add a function ffs_checkfreefile needed for snapshot creation.
- Add special handling of snapshot files:
Snapshots may not be opened for writing and the attributes are read-only.
Use the mtime as the time this snapshot was taken.
Deny mtime updates for snapshot files.
- Add function transferlockers to transfer any waiting processes from
one lock to another.
- Add vfsop VFS_SNAPSHOT to take a snapshot and make it accessible through
a vnode.
- Add snapshot support to ls, fsck_ffs and dump.
Welcome to 2.0F.
Approved by: Jason R. Thorpe <thorpej@netbsd.org>
an _LKM.
This adds pools to the list of things that lkms must do manually
because they're set up with link sets. Not that there's anything
wrong with link sets, but that we need to try harder to remember that
lkms are second class citizens. Of a sort.
no longer use and/or need it
- removed casts from unionfs, deadfs and fdesc
(there are more to hunt down still)
- changed vfs_quotactl args argumet from caddr_t to void *
- changed vfs_quotactl structures/callers to reflect the api change
Compiled fine and ran for about a day. Approved/reviewed by
christos@netbsd.org and gimpy@netbsd.org.
to pool_init. Untouched pools are ones that either in arch-specific
code, or aren't initialiased during initial system startup.
Convert struct session, ucred and lockf to pools.
Gone are the old kern_sysctl(), cpu_sysctl(), hw_sysctl(),
vfs_sysctl(), etc, routines, along with sysctl_int() et al. Now all
nodes are registered with the tree, and nodes can be added (or
removed) easily, and I/O to and from the tree is handled generically.
Since the nodes are registered with the tree, the mapping from name to
number (and back again) can now be discovered, instead of having to be
hard coded. Adding new nodes to the tree is likewise much simpler --
the new infrastructure handles almost all the work for simple types,
and just about anything else can be done with a small helper function.
All existing nodes are where they were before (numerically speaking),
so all existing consumers of sysctl information should notice no
difference.
PS - I'm sorry, but there's a distinct lack of documentation at the
moment. I'm working on sysctl(3/8/9) right now, and I promise to
watch out for buses.
* Remove the "lwp *" argument that was added to vget(). Turns out
that nothing actually used it!
* Remove the "lwp *" arguments that were added to VFS_ROOT(), VFS_VGET(),
and VFS_FHTOVP(); all they did was pass it to vget() (which, as noted
above, didn't use it).
* Remove all of the "lwp *" arguments to internal functions that were added
just to appease the above.
be inserted into ktrace records. The general change has been to replace
"struct proc *" with "struct lwp *" in various function prototypes, pass
the lwp through and use l_proc to get the process pointer when needed.
Bump the kernel rev up to 1.6V
- Under chroot it displays only the visible filesystems with appropriate paths.
- The statfs f_mntonname gets adjusted to contain the real path from root.
- While was there, fixed a bug in ext2fs, locking problems with vfs_getfsstat(),
and factored out some of the vfsop statfs() code to copy_statfs_info(). This
fixes the problem where some filesystems forgot to set fsid.
- Made coda look more like a normal fs.
ad