Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
81,422 Commits 606 Branches 0 Tags 3.1 GiB
0b7f4cf1ba
Commit Graph

10431 Commits

Author SHA1 Message Date
chs
fae4d6d720 fix typo in previous revision so that the scsi code compiles again. 2001-05-23 02:16:19 +00:00
fvdl
24b32e8f08 Add missing definitions for hw checksumming. 2001-05-23 00:56:58 +00:00
mjacob
d298a26243 Add back in (again) ISPASYNC_LIP and ISPASYNC_LOOP_RESET async 
notifications. Let each platform set policy as to what to do
with these.
 2001-05-22 19:32:41 +00:00
mjacob
b9eb902304 Make SDRETRIES an option you can dig out of opt_scsi.h. 
Add SD_IO_TIMEOUT (an option in opt_scsi.h) also, which defaults to the
normal 60 * 1000 timeout for normal read/write commamds. This allows you
to shorten or lengthen the timeout as needed.
 2001-05-22 18:59:57 +00:00
mjacob
38f6ada8b6 Add SDRETRIES and SD_IO_TIMEOUT option for sd. 2001-05-22 18:58:15 +00:00
thorpej
607b14bf7b Add mii_bitbang attribute to gsip, pointed out by Andrew Gillham. 2001-05-22 16:58:23 +00:00
thorpej
a888f6ef73 If the cache line size in the BHLC register is not configured, 
then clear the MRL/MRM/MWI command-ok flags when attaching a
device.
 2001-05-22 16:10:44 +00:00
soren
79859fb138 Regen. 2001-05-22 16:07:56 +00:00
thorpej
6e2bc5b352 Enable the PCI MWI command for memory writes on the i82558 and 
higher.
 2001-05-22 16:05:01 +00:00
soren
b16ba1d8cd Add i82562ET id. 2001-05-22 16:04:27 +00:00
thorpej
188e0d6625 Some changes from the new FreeBSD `fxp' driver: 
- Add some additional config block bits for the i82558/i82559.
- Change the config block template to only fill in the must-be-one
  reserved bits, leave fxp_init() to fill in all the important things.
- On the i82558/i82559, we can use "Receive Long Frames" rather than
  "Save Bad Frames" to support the VLAN MTU.
- Use 802.3x flow control on the i82558/i82559.  This is all handled
  transparently by the hardware.  When in promiscuous mode, allow
  wire-watchers to see the flow control frames.
- Use the Extended TxCB format on the i82558/i82559.  This places two
  Transmit Buffer Descriptors directly in the TxCB, which should cover
  the vast majority of packets transmitted.  This saves PCI transactions
  that would otherwise be required to fetch the TBD list.

With the tansmit queue length changes from yesterday, this gets us up to
11.5MB/s TCP transmit speed, out of an absolute maximum of 12MB/s possible
on a 100Mb/s link.
 2001-05-22 15:29:30 +00:00
bouyer
2a604875d6 Remove one extra byte from scsipi_mode_select; pointed out by Juergen 
Hannken-Illjes.
 2001-05-22 15:14:24 +00:00
augustss
e25bf167a1 Regen. 2001-05-22 10:43:15 +00:00
augustss
f43e2c6ba1 Add Scanjet 4300. 2001-05-22 10:38:56 +00:00
thorpej
a5a03e13dd Report 82558, 82559, etc. based on chip revision. Also, remember which 
revsion we have for feature enables later.
 2001-05-22 01:23:25 +00:00
jhawk
4af61a686a oops. Make it compile. 2001-05-22 00:43:12 +00:00
jhawk
b5805fa0c8 Sigh. Regen correctly. 2001-05-22 00:41:52 +00:00
thorpej
611e112566 A little slight cleanup. 2001-05-22 00:27:01 +00:00
jhawk
7a31dfa328 Supoprt the IOGEAR/ATEN UC-232A, which uses the Prolific 2303. 
Make this the "PRODUCT_PL2303" because it's actually id 0x2303
and change the old PRODUCT_PL2303 to PRODUCT_RSAQ.
 2001-05-22 00:18:03 +00:00
thorpej
fb4607ec45 Add some additional register definitions, from FreeBSD. 2001-05-22 00:07:32 +00:00
thorpej
0064d69faf Re-arrange the transmit control data somewhat so that we can 
use the extended TxCB format (that change will happen later).
 2001-05-21 23:58:44 +00:00
minoura
92d92b1cb2 Correct an easy mistake in initializing gain registers. 
This will fix the L-R imbalance.
Suggested by Ryo HAYASAKA <ryoh@jaist.ac.jp>.
 2001-05-21 23:55:04 +00:00
thorpej
65ac078927 Sigh, typo in last. 2001-05-21 23:21:27 +00:00
thorpej
00f922fa70 Change NTXSEGS from 16 to 8, and the TXQUEUE len from 128 to 256. Also 
increase the number of Rx buffers from 64 to 128.

These mirror some performance tweaks made to the sip(4) driver.
 2001-05-21 22:20:31 +00:00
thorpej
afdab0cab8 The ICH3 also has the Resume Bug. 2001-05-21 22:12:08 +00:00
thorpej
a0f9e3c6fb Regen; add ICH3 network controller IDs. 2001-05-21 22:11:31 +00:00
thorpej
6b51adfbff Add ICH3 network controller IDs. 2001-05-21 22:11:06 +00:00
thorpej
d84e2452ea Fix non-fatal typo -- CB_NOP -> CU_NOP in the ICH work-around (they 
have the same value).
 2001-05-21 21:49:51 +00:00
thorpej
b4538a0165 The 82801BA built-in Ethernet has a bug which requires us to 
issue a NOP before a CU_RESUME when in 10baseT mode.  Handle
this.
 2001-05-21 21:47:52 +00:00
thorpej
e7a0ef6145 ANSI'ify. 2001-05-21 20:59:38 +00:00
jhawk
ecb3a30463 add $NetBSD$ 2001-05-21 20:47:13 +00:00
mjacob
3462fe5d99 Remove reference to adapter_q in scsipi structure. Comment about the 
usage of channel_q.
 2001-05-21 15:50:46 +00:00
ichiro
598241f757 add product COREGA FEther-PCC-TXF 
kern/11357 and report from goro@venus.dti.ne.jp
 2001-05-21 13:48:25 +00:00
ichiro
fd7d5008e8 regen 2001-05-21 13:45:10 +00:00
ichiro
4108bc4645 add product COREGA FEther PCC-TXF 2001-05-21 13:44:48 +00:00
christos
2ed6d9dbf7 PR/12991: Dave Huang: DVD ioctls don't work because we send the wrong size 
CDB (16 instead of 12).
 2001-05-20 21:07:58 +00:00
bjh21
86e12294cd Add Multi-media/Ethernet card from Irlam. 2001-05-20 21:07:06 +00:00
bjh21
65165c3deb 16-bit podules I acquired at Wakefield: 
- Added SJ Research Nexus
 - Note HCCS use same ID for IDE and SCSI cards
 - Update Castle EtherSCSI entry
 2001-05-20 20:40:19 +00:00
ichiro
cb675810e0 add more comment about firmware of EVAL-CARD. 2001-05-20 13:14:54 +00:00
ichiro
c13971f816 chenge chip and card identity, 
print RF-chipset, Medium Access Controller(MAC) and CARD-identity
 2001-05-20 12:57:57 +00:00
ichiro
309a9b433c delete RCS Id from pcmciadevs rev 1.128 2001-05-20 10:47:50 +00:00
ichiro
3b35709de7 make compile again 
(fix warning : missing white space after `#define....)
 2001-05-20 09:54:47 +00:00
ichiro
a2dd9d529f regen 2001-05-20 09:16:14 +00:00
ichiro
caed7fa236 add vendorID National Instruments 
add productID PCMCIA-GPIB
 2001-05-20 09:15:54 +00:00
soren
281f1795a4 Add TI 1410 to yc_chipsets[]. 2001-05-19 19:46:08 +00:00
tsutsui
3d863329cc space/TAB cosmetics 2001-05-19 12:04:07 +00:00
is
5c9dc5b0d0 When abusing structs to describe on-wire (or in-hardware) data structures, 
they need to be packed. (Without this, breaks on at least m68k.)
 2001-05-18 21:11:43 +00:00
enami
e4334b830d Don't capitalize the word sync or async. It's inconsistient with other 
messages.
 2001-05-18 16:25:07 +00:00
enami
d5338ae90e Regen. 2001-05-18 15:35:49 +00:00
enami
679f6a1a54 Add product IDs of internal devices found in NEC VRC4173 and vendor/product 
ID of MediaQ MQ200.
 2001-05-18 15:35:19 +00:00
bouyer
8aa2f73d43 Enable tagged queuing again; should work now with scsipi_base rev 1.42 2001-05-18 12:57:42 +00:00
bouyer
8b5bf22895 Workaround for broken drives (explained to me by Chris G. Demetriou): 
some devices can't handle tag number larger than some values and always
reject commands with QUEUE FULL if the tag number is larger than this.
Under some circonstances the scsipi system may not decrease periph_openings
(as a workaround of other odd behavior) and we may end up requeuing the command
with a hight tag value again, and the driver could loop on this.
Workaround: in case of queue full, decrease periph_openings to
min(periph_active - 1, periph_openings - 1) so that, after some iteration,
periph_openings is less than the max tag value acceptable by the device.

Solves the problem with tagged queuing on ncr53c9x for me.
 2001-05-18 12:56:28 +00:00
fredette
d76bcda838 Fixed some typos, removed unused asm() labels. Removed 
the DMA map creation, now the bus glue does this.
 2001-05-18 12:51:58 +00:00
drochner
3df4a7a4a8 do this console device lookup thing the right way this time 
(This "dev" argument to the console functions is nonsense - nothing
should depend on it.)
 2001-05-18 11:49:21 +00:00
jhawk
4601552595 Regen 2001-05-18 06:14:40 +00:00
jhawk
6f032f45b3 Support the Socket EA pcmcia ethernet (ne). It's ooooold. 2001-05-18 06:05:52 +00:00
thorpej
f1f78293df - Add some instrumentation which can be enabled by defining 
SIP_EVENT_COUNTERS.
- Decrease SIP_NTXSEGS to 8 and increase SIP_TXQUEUELEN to 256.
  This gives us 256 transmit jobs with only twice the descriptor
  memory footprint.  This prevents stalling transmissions due to
  lack of transmit jobs under heavy load.
- Increase SIP_NRXDESC to 128 so we don't run out of receive descriptors
  under extreme load.
- As recommended by the manual, leave one descriptor in the transmit ring
  with OWN clear to prevent wrap-around.
- Even though the manual claims that driver software must initialize
  TXDP if there are no pending transmissions when a new transmission
  is to be initialized, doing so causes serious performance degredation
  on the DP83820 under heavy load.  Not initializing TXDP also increases
  performance on the DP83815.

All of this gets us up to ~90Mb/s on both the DP83820 and DP83815 when
connected to a 100base network.
 2001-05-18 04:38:30 +00:00
thorpej
dbdf3820d8 Add a driver for the National Semiconductor DP83820 Gigabit Ethernet 
chip.  This is found on the NetGear GA-622 and Asante FriendlyNet
GigaNIX.
 2001-05-18 02:03:53 +00:00
bouyer
7ddcb8122d SDEV_DB -> SCSIPI_DB 2001-05-17 20:02:56 +00:00
drochner
bc8eda57c9 increase the delay after PHY reset - it seems that mii register accesses 
can fail if attempted too soon after reset
 2001-05-17 19:00:18 +00:00
drochner
199e9f8164 regen 2001-05-17 17:39:30 +00:00
drochner
10aff2d3f0 argh - the OUI of PMC-Sierra is 00-e0-04, according to IEEE. 
They managed to mess it up in a new way.
 2001-05-17 17:39:00 +00:00
drochner
c1f451f54d regen 2001-05-17 17:37:01 +00:00
drochner
2e9334d53e add some stuff I got between my fingers 2001-05-17 17:36:30 +00:00
drochner
c1617a9b13 check PCI subsystem ID for a SMC9432BTX1 or SMC9432FTX and tell the common 
driver about their media support (BNC and 100FX, respectively)
 2001-05-17 17:35:13 +00:00
drochner
323adb5a41 support BNC interfaces (serial mode) as on the SMC9432BTX and 100FX 
on the SMC9432FTX
 2001-05-17 17:32:47 +00:00
drochner
1ea0cb1ea4 support the fiber output of the PHY device, enabled if the MIIF_HAVEFIBER 
flag is passed in from the board driver
 2001-05-17 17:29:54 +00:00
drochner
002851041c re-enable mii_flags in attach args - I've found a use for it: tell the 
PHY which support it that a fiber interface is present
 2001-05-17 17:28:21 +00:00
ichiro
0fcd8f3c7f regen 2001-05-17 13:15:47 +00:00
ichiro
8f8e3e808f add products 
Intel PRO/Wireless 2011 LAN PC Card
 2001-05-17 13:14:19 +00:00
drochner
5e1115908d Revert previous change; this breaks for the old controllers which 1.6 
should help for. Instead, weaken the "echo" test: don't insist in
getting the same value back which was written.
 2001-05-17 10:48:39 +00:00
scw
d1bc67e029 In osiop_scsidone(), call scsipi_done() even for polled operations. 
This fixes a `hang' on shutdown when the `Synchronise Cache' command
is sent to a disk. (It uses polled mode because it is called from inside
a shutdown hook).
 2001-05-17 10:35:30 +00:00
jmc
c2b5ec5220 Add a few nits. Hubs seem problematic on resets sometimes. 
Also, make sure fwohci can detach cleanly (for cardbus).
 2001-05-17 05:30:37 +00:00
chs
bcc2ce4f8c give sunkbd and sunms a "poll" routine. 2001-05-17 02:24:00 +00:00
mjacob
90cabee3fb Per helpful suggestion from LukeM- make INLINE usage consistent (and 
use correct __inline format).
 2001-05-16 21:41:52 +00:00
jdolecek
8e532c1ad1 Make sure to allocate big enough mbuf data area before elevating 
interrupt priority, to avoid allocating additional mbufs on
splsched(). Move some other misc bits out of splched()-guarded
section. This should make the code a bit more friendly wrt e.g.
clock interrupts. Sligh performance improvement was observed with
this change (like 1-2% on slow machine), even.

This also fixes ancient kern/2478 by Bill Sommerfeld.
 2001-05-16 20:30:52 +00:00
ichiro
8a78799bf4 support BUFFALO AirStation WLI-PCM-S11 
this card are PRISM2.5 card.
 2001-05-16 14:33:21 +00:00
ad
c6da2452c0 Put back /usr/include/dev/tc/sticreg.h. 2001-05-16 13:48:52 +00:00
ichiro
25221c413e regen 2001-05-16 12:57:55 +00:00
ichiro
4c575cc65b add product 
BUFFALO AirStation 11Mbps WLAN Card
 2001-05-16 12:57:27 +00:00
tsubai
eef5fa50d3 Big-endian support. 2001-05-16 10:45:36 +00:00
ichiro
15833cae3b add prism chip identity, Prism2 with SST flush. 2001-05-16 07:53:28 +00:00
lukem
ff47810d07 fix previous delint 2001-05-16 06:29:01 +00:00
lukem
c15945130c delint: remove unnecessary assignment to same objection (hidden in #define) 2001-05-16 04:50:11 +00:00
lukem
be493349d2 delint: zero sized array initalisation is a gccism 2001-05-16 04:39:03 +00:00
lukem
927097774a delint: remove volatile from fxp_mdi_read() decl 2001-05-16 04:20:55 +00:00
mjacob
b81e69fa8e beginning basic 2300 infrstructure support 2001-05-16 03:58:34 +00:00
mjacob
9f2c2c7a8c Keep up with the Joneses.... further synchronization for the eventual 
implementation in NetBSD for target mode.
 2001-05-16 03:58:03 +00:00
mjacob
73eba1a839 Long overdue- put locks on the usage of the mailbox command stuff. This 
keeps us from stomping on ourselves.

Say we're in the middle of re-evaluating a loop (and sleeping) when a
command completes, or a timer refires, and this *other* thread decides
*it* wants to start re-evaluating the loop. Bad news.

We have to be a bit careful- if we can't acquire the MBOX semaphore at
interrupt level, we will simulate a host interface error. This is a bit
of a temp workaround. There's some work underway driven by a NetBSD
commercial user that will try and force most mailbox stuff into a
part A/part B interrupt driven model.
 2001-05-16 03:55:15 +00:00
mjacob
a1dd9d78ee It's 'role None', not 'role No'. 
Also, pay attention to the difference in the ISPASYNC_CHANGE_NOTIFY
between loop and fabric changes.
 2001-05-16 03:52:10 +00:00
ichiro
9a3074ffce cosmetic change. 
change version format: <major>.<minor> variant <num>
 2001-05-16 02:36:37 +00:00
matt
91d9961f24 Regen 2001-05-15 23:18:16 +00:00
matt
75d77bf185 Add OUI for PMC-Sierra. Add BCM5221 Phy. Add PM8351 Phy. 2001-05-15 23:17:48 +00:00
matt
f5d9baae2f Note that extended status is in register 15 2001-05-15 23:16:40 +00:00
christos
6ae38c2f7a Try the kbc_auxtest if the random write/read to the aux port fails (it returns 
0xfe on my gateway 2000 circa 1993). That should not affect broken controllers
that choke on the kbc_auxtest, because for those the write/read test succeeds.
 2001-05-15 22:01:07 +00:00
thorpej
c2ffdccb2b Regen; Add National Semiconductor DP83861 1000baseTX PHY. 2001-05-15 21:37:33 +00:00
thorpej
8fd542b023 Add National Semiconductor DP83861 1000baseTX PHY. 2001-05-15 21:37:04 +00:00
lukem
d62b92e0f7 delint: () protect some macro args 2001-05-15 15:41:27 +00:00
lukem
889762fbcf delint: need ; between case label and } 2001-05-15 15:25:04 +00:00
lukem
e3134697e1 delint: remove comments from macro args; confuses cpp/lint 2001-05-15 15:06:23 +00:00
lukem
09ba301f07 delint: () protect some macro args 2001-05-15 15:00:04 +00:00
lukem
9bef152bd7 delint: need ; between case label and } 2001-05-15 14:57:49 +00:00
lukem
0b6a1eb95a delint: () protect some macro args 2001-05-15 14:37:36 +00:00
lukem
d3e16de232 delint: need ; between goto label and } 2001-05-15 14:30:24 +00:00
lukem
b6b83e2ec3 delint; use MAX(sizeof(..),sizeof(..)) instead of max(...) for array size 2001-05-15 14:03:27 +00:00
lukem
13a9902fc6 delint: can't have an empty case item at the end of a switch; need a ; at least 2001-05-15 13:53:20 +00:00
ad
ae0203ee27 Correct arguments to bus_dmamap_create(), and add a reset routine for the v3 
interface.
 2001-05-15 12:49:37 +00:00
ichiro
0071e88a8c fixed mistake. 
major version and minor version were made reverse.
 2001-05-15 11:45:50 +00:00
ichiro
08d33f4cc0 Fix indentation in recent commit. 2001-05-15 09:06:15 +00:00
ichiro
4afb07bd12 getting prism2 firm ver routine to wi_get_id(). 
if firm ver is more than 0.8c3, promiscuous mode is off.

typo WI_RID_STA_IDENEITY -> WI_RID_STA_IDENTITY
 2001-05-15 09:01:27 +00:00
jmc
0aae41bf84 Clean up comment about unregistering callbacks 2001-05-15 06:54:07 +00:00
jmc
c3967bca55 Various small changes. 
Clean up one bug in a DPRINTF in arrs_input which could panic on some packets.
Gut the ack/response functionality and clean it up so all packets get checked
correctly and the abuf struct isn't used once the ab_cb has happened (there
still could be ack packets waiting to be processed at that time).
Finally, add some documentation explaining read/write/inreg and their
purpose/argument calling.
 2001-05-15 06:52:30 +00:00
jmc
d91da495a9 Back out last change until I get fwohci rototilled better for checking the ack bits. Makes things compile again. 2001-05-15 06:30:30 +00:00
ichiro
caa399b739 WEP cannot be used when Prism2 Firm version is lower than 0.8.3. 
Although WEP is used in Windows also in an old firm,
because WEP is processed by the windows driver side.
If Prism2 Firm version is more than 0.8.3, WEP does work without 'Promiscuous ON'.
 2001-05-15 04:27:22 +00:00
kanaoka
4d4231d0e9 Add support for "Corega FEther CB-TXD". 
kern/12709: from Yamashiro Jun <j99060@ie.u-ryukyu.ac.jp>.
 2001-05-15 04:26:23 +00:00
kanaoka
b003ab3d9c Regen. 2001-05-15 04:25:12 +00:00
kanaoka
0f5babc5cb Add product "Corega FEther CB-TXD". Modified from kern/12709. 
from Yamashiro Jun <j99060@ie.u-ryukyu.ac.jp>.
 2001-05-15 04:24:28 +00:00
ichiro
2970b99ac9 It enabled it to control roaming mode and authentication mode. 
Roaming mode can change value into 'firm mode' and disable.
Authentication mode can change into 'Open System authentication'
and 'Shared Key Authentication' with Prism2 chip.

wi_get_id() was introduced in order that chip might judge automatically
whether it is Prism2 chip. Therefore, a pp_prism2 entry in
"struct wi_pcmcia_product" became unnecessary.
 2001-05-15 04:14:06 +00:00
thorpej
38c798fe9f Encapsulate name declarations in macros in preparation for adding 
conditionally-compiled code for the DP83820.
 2001-05-15 03:06:21 +00:00
thorpej
edfd12a9b1 Define the register/descriptor differences between the DP83815 and the 
DP83820.  The DP83820 definitions are wrapped in #ifdef DP83820, since
there are enough differences that a single binary object would not be
able to efficiently drive both the DP83815 and DP83820.
 2001-05-15 02:19:05 +00:00
thorpej
bdb6ea6ecc Regen; added DP83820 Gigabit Ethernet chip. 2001-05-14 22:37:24 +00:00
thorpej
285931ff50 Add product ID for the National Semiconductor DP83820 Gigabit Ethernet 
chip.
 2001-05-14 22:36:06 +00:00
matt
2573405952 Add latent vendor entries for ServerWorks and Winbond IDE controllers. 
No code to use them as yet.
 2001-05-14 20:41:27 +00:00
bouyer
bc980d7eba Use SCSI/ATAPI common definition for MODE_{SELECT,SENSE}{,_BIG}. Define 
functions to send theses commands in scsipi_base.c and use them instead
of ad-hoc commands setups.
 2001-05-14 20:35:27 +00:00
jdolecek
85c02ac331 epintr(): eliminate write-only variable 'addrandom' 2001-05-14 09:28:49 +00:00
jdolecek
6ff7de5716 remove unneeded #includes, fix typo 2001-05-14 08:01:23 +00:00
jdolecek
1f7c685ce3 remove //-commented debugging stuff 2001-05-14 07:35:33 +00:00
jdolecek
497bb809df do not use the synchronous read mode for MCA 3c529 2001-05-14 07:03:50 +00:00
jmc
61ca5f641b Remove ackcb. It's a duplicate of existing functionality. 2001-05-14 06:51:36 +00:00
jmc
98139fa8b9 Make sure and zero out the malloc'd abufs before using them. 2001-05-14 05:46:41 +00:00
ichiro
7f2de75450 Corega FEther PCC-TXD works fine. 2001-05-14 01:44:42 +00:00
ichiro
9a107674e5 regen 2001-05-14 01:43:42 +00:00
ichiro
70f4199532 add product Corega FEther PCC-TXD 2001-05-14 01:41:16 +00:00
jdolecek
2cd8833615 Change the comment about sucky performance to recommendation to remove 
DIAGNOSTIC/DEBUG from the kernel. This helped to boost the performance
on my test machine from ~5KB/s to like 800KB/s for ftp test, and
to like 700KB/s for netio test. I wouldn't have imagined the options
are THAT costly ....
 2001-05-13 20:43:04 +00:00
ragge
9654c235a7 Note TS11 (ts). 2001-05-13 15:34:25 +00:00
ragge
59b29023fd Update the TS11 driver to useable state. 
Thanks to Michael Kukat for providing a machine to test this driver.
 2001-05-13 15:32:40 +00:00
ragge
f66126b9f0 Moved from sys/arch/vax/uba/. 2001-05-13 15:30:10 +00:00
ragge
637bffc245 Add bus type to softc. 2001-05-13 15:23:37 +00:00
jmc
3790f44eac Add a retries counter to abuf 2001-05-13 05:02:08 +00:00
jmc
880b3e6a6f Add locators support 2001-05-13 05:01:42 +00:00
jmc
a3263e073a Turn off PCMCIADEBUG by default. This should get set with options in a config file 2001-05-13 04:24:51 +00:00
jmc
95cc3bf342 Turn off PCMCIACISDEBUG by default. This should get set with options in a config file 2001-05-13 04:24:28 +00:00
jmc
6cf92c7dba Turn off PCMCIADEBUG by default. This should get set with options in a config file 2001-05-13 04:23:46 +00:00
christos
6f62797262 Don't leak memory in case of a realloc failure. 
Reported by: grendel@heorot.stanford.edu (Ted U)
 2001-05-12 19:18:57 +00:00
jmc
bfd7dcb931 Add first pass generic ack callback code (to eventually replace mbuf specific code). 
Change ab_node's to ab_req.
Fix a bug where setting BIBValid on OHCI 1.0 chips (this is a reserved bit
on 1.0)
 2001-05-11 06:10:44 +00:00
jmc
29499573cd Change ab_node's to ab_req. 
Use read/write instead of input/output.
Fix a bug in attach where the abuf wasn't getting zero'd out.
 2001-05-11 06:09:01 +00:00
jmc
5bf1559a64 Rename input/output to read/write to match ieee1394var.h 2001-05-11 06:07:40 +00:00
jmc
2d235c864f Add some notes 2001-05-11 06:07:02 +00:00
jmc
b4974f0526 Add first pass of generalized hooks for packet completion (i.e. ack) codes. This will eventually replace the mbuf code when it moves back to if_fw.c where it belongs. 2001-05-11 06:06:03 +00:00
jmc
6dc32302f3 Add mask for getting the ACK bits out of the status area of a DMA context descriptor 2001-05-11 06:04:49 +00:00