204717149e
Enable atu, vnd, and kttcp by default
2005-01-24 02:40:00 +00:00
8506af05a4
Fix mem/io extents usage. Previously had been mis-using the bs_cookie for a bs_tag.
2005-01-24 02:38:15 +00:00
f61320850a
whoops, had intr mask inverted
2005-01-24 02:36:04 +00:00
ec53a61e98
Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
...
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.
XXX: we _need_ some way of making this more simple.
2005-01-17 15:28:51 +00:00
b6b2f0d2df
Use hd44780var.h instead of hd44780_subr.h
2005-01-11 00:59:06 +00:00
fdb2df8f5f
enable pcic(9) PCMCIA controllers in default kernel
2005-01-09 21:44:32 +00:00
6b75e7b0f9
Allow for pcic(9) attachments on the ISA bus
2005-01-09 21:40:02 +00:00
0686f5514c
call isa_bs_mallocok() right before ISA bus attachment
2005-01-09 21:35:51 +00:00
453e7edc70
Implement extent(9) based management of ISA io/mem so pcic(9) has
...
a chance of working.
2005-01-09 21:32:08 +00:00
5f20950e38
o reversed sense of RS in writereg
...
o attempt HD44780 reset on open if LCD not detected at bootup
o skip everything if sc_dev_ok == 0 in writereg/readreg
2005-01-09 15:48:51 +00:00
9a859b8fc6
Support LCD by default on TS-7200
2005-01-08 20:41:56 +00:00
63b4d87a37
Add tslcd device
2005-01-08 20:39:18 +00:00
c87859c9da
Support for bit-banging HD44780 bus cycles on the generic LCD header
2005-01-08 20:23:32 +00:00
2f2edb0a13
Support up to 4 TS-ETH10 ethernet boards on the PC/104 bus
2005-01-08 02:58:03 +00:00
5a55b5cff3
Enable INET6 by default, bump SYMTAB_SPACE
2004-12-31 12:14:22 +00:00
3a8922c4d8
descend into TS7200_flash_0x60660000
2004-12-28 16:19:41 +00:00
3f09dcaa18
Add tsrtc to TS-7200 config
2004-12-27 02:44:38 +00:00
bb0dbb71f1
Clean up autoconf stuff
2004-12-27 02:42:49 +00:00
cff4f0088d
Add support for TS-5620 daughter card RTC
2004-12-27 02:41:54 +00:00
0ac1f404ba
support watchdog timer on TS-7200 CPLD
2004-12-26 22:02:10 +00:00
b6d96c3c3d
Pad .sdata section to a 4-byte boundary so that the .image section
...
is always aligned. This makes md_root_loadaddr always 4 byte aligned.
Without this, may get an un-aligned access trap before we even print
anything on the console which was a pain in the neck to debug since so
early in the bootstrap the CPU usually just halts on exceptions.
2004-12-24 16:17:27 +00:00
881290e4de
add netbsd-wd0, netbsd-sd0, netbsd-epe0 configurations
2004-12-24 10:53:34 +00:00
eadf291885
On-chip EP93xx UART support
2004-12-24 10:34:27 +00:00
a1ed993cf1
generic TS-7200 gzboot support
2004-12-24 10:33:54 +00:00
04fb7eeb00
support for gzimg's in TS-7200 Redboot on-board flash
2004-12-24 10:32:40 +00:00
e8d2af9dd0
Need these files present for ISA support
2004-12-23 04:36:18 +00:00
419237bbb9
generic kernel configuration for TS-7200 SBC's
2004-12-23 04:35:01 +00:00
cf4725f858
build configuration metadata for TS-7200 SBC
2004-12-23 04:34:03 +00:00
01f7ff5bd1
PC/104 aka ISA bus support on TS-7200
2004-12-23 04:31:47 +00:00
e95044fa10
CompactFlash IDE controller glue
2004-12-23 04:30:50 +00:00
37b0a6b3f3
TS-7200 onboard CPLD driver
2004-12-23 04:30:19 +00:00
5494e0fbe9
TS-7200 magic numbers/structs
2004-12-23 04:29:38 +00:00
9817c7eefb
TS-7200 machdep initialization
2004-12-23 04:28:31 +00:00
16a20082fa
TS-7200 SBC epcom UART glue
2004-12-23 04:27:56 +00:00
964859d895
Fix comments regarding configration bounaries
2004-12-12 21:03:06 +00:00
5958dd944e
Fix comments slighly
2004-12-12 20:42:53 +00:00
fe4d81db48
pdcsata(4), a driver for the Promise SATA150 (aka PDC203xx) serie of
...
controllers. Tested with a PDC20375 (2 SATA, one PATA) controller on sparc64.
Added to all kernel config file which had pdcide(4).
2004-11-24 20:49:17 +00:00
30fc143afa
Add COMPAT_BSDPTY to the rest of the config files.
2004-11-10 17:54:02 +00:00
dc2f2fbe74
Centralize the declaration of booted_device and booted_partition.
2004-10-23 17:07:37 +00:00
0c21c79cc5
s/uax/axe/
2004-10-23 14:00:50 +00:00
3a1db40022
Spelling in comment.
2004-09-10 15:27:10 +00:00
6e3c639957
IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
...
tech-net@
2004-09-04 23:29:44 +00:00
46289e1fef
Phase out the use of a string as first "attach args" member to control
...
which bustype should be attached with a specific call to config_found()
(from a "mainbus" or a bus bridge).
Do it for isa/eisa/mca and pci/agp for now. These buses all attach to
an mi interface attribute "isabus", "eisabus" etc., and the autoconf
framework now allows to specify an interface attribute on config_found()
and config_search(), which limits the search of matching config data
to these which attach to that specific attribute.
So we basically have to call config_found_ia(..., "foobus", ...) where
such a bus is attached.
As a consequence, where a "mainbus" or alike also attaches other
devices (eg CPUs) which do not attach to a specific attribute yet,
we need at least pass an attribute name (different from "foobus") so
that the foo bus is not found at these places. This made some minor
changes necessary which are not obviously related to the mentioned buses.
2004-08-30 15:05:15 +00:00
951ec8627f
Don't use vector_page before it's been initialized.
2004-08-07 11:20:53 +00:00
da975d6d89
Fix pasto error in comment.
2004-08-07 11:13:09 +00:00
5b0328df32
Add barriers to prevent scheduling of critical code outside of the
...
SPL-protected region.
2004-08-07 11:08:58 +00:00
0163f96e43
Add fixed configs for fxp0 and sd0 booting.
2004-08-07 11:00:06 +00:00
0e811ff437
Support probing the compact PCI bus.
2004-08-07 10:54:54 +00:00
7c8434c371
Set CPUFLAGS not COPTS
2004-08-07 10:47:19 +00:00
1300889f4e
Use db_machine_init.
2004-08-06 15:13:45 +00:00
joff