eddf0f4e2c
increase the securelevel (using the same rules as before) much earlier in the
...
boot process. before cron, sendmail, inetd, etc, are run, but after lkms are
loaded. this avoids the chances of `@reboot', mail .forwards, remote logins,
etc., happening before the securelevel has been raised.
1999-01-31 08:46:58 +00:00
97a24ca055
support dmesg=NO and dmesg_flags, and do not cut the old boot messages..they might be useful. fix a typo (rbootd is not rarpd)
1999-01-12 12:42:46 +00:00
f6cc762de0
Enable cron to be turned on and off from rc.conf, like other daemons.
...
From Soren S. Jorvang <soren@t.dk>, closes his PR bin/5250.
1999-01-12 04:58:37 +00:00
4b0bbbdbe6
Add $portmap_flags variable, now that portmap has optional flags, and
...
by default, pass '-l' flag (libwrap logging) by analogy with inetd
1999-01-11 21:04:38 +00:00
8ab9483f37
save a copy of the boot messages. Closes 6398 from msanders@confusion.net
1999-01-06 03:41:44 +00:00
7d0d25360f
Add support for RAIDframe configuration as suggested by Eric S. Hvozda
...
in PR install/6676.
1999-01-04 00:49:36 +00:00
483a921963
allow /var/crash to be a symlink to a directory
1998-11-21 03:00:38 +00:00
deb00272b9
Add USB support. Supported so far:
...
* UHCI and OHCI host controllers on PCI
* Hubs
* HID devices withe special drivers for mouse and keyboard
* Printers
1998-07-12 19:51:55 +00:00
2e5ce72aad
Strip comments from "${amd_master}".
1998-06-21 16:38:38 +00:00
4c04041950
add "screenblank" support.
1998-04-07 04:47:33 +00:00
cb545a7ee4
send ntpdate output to syslog rather than stdout (with -s).
...
suggested by "Soren S. Jorvang" <soren@t.dk>
1998-02-24 00:24:45 +00:00
63e548eb1d
exclude 127.127 servers when automagically determining ntpdate hosts
1998-02-23 05:20:52 +00:00
8f59ce8e35
include rc.subr and use appropriately
1998-01-26 12:02:43 +00:00
16cc8254d4
Move ipnat from /etc/netstart to /etc/rc after /usr is mounted.
1998-01-24 19:12:54 +00:00
30e556f4e5
Fix pr 4587 (from Matthias Scheler) -- pause slightly after xfs starts.
1998-01-09 21:57:17 +00:00
d2cfb19c3d
print a warning if no swap devices are configured and "no_swap" is not YES.
1997-11-23 04:17:57 +00:00
6ba565c4d3
Add options to rc.conf and rc to start xfs (x font server) and xdm.
...
Add entries to rc.conf.5.
While we're here, note that the domestic kerberos damons are still
Kerberos IV, not kerberos version 5.
1997-11-11 02:28:58 +00:00
a06997e6bd
Replace the (slightly broken) check to avoid double mounting of
...
filesystems by a correct one. (too bad that there was no agreement
about a mount option doing the same...)
Introduce a new rc.conf variable to mount user-defined filesystems
early in startup (eg for syslog, crashdumps, ...).
1997-10-10 09:37:54 +00:00
cb57cd9636
add $ipmon and $ipmon_flags, to control startup of ipmon(8)
1997-10-07 12:11:48 +00:00
a14fe6a191
fix an rc.conf flag check which was broken with the "checkyesno" changes
1997-09-12 10:36:04 +00:00
52157361c2
avoid to mount /usr twice if LKM load already did it
1997-09-12 09:53:08 +00:00
8cd518d0fd
no more DEFAULT for $ntpdate_hosts; from Geoff Wing in PR bin/4073
1997-09-08 02:34:44 +00:00
d1307e8424
Curt, what is in rc.func ?
...
I only see rc.subr so I renamed rc.func to rc.subr.
1997-08-29 09:33:34 +00:00
c3b0e18db8
Split rc.conf variables for starting programs into two: an on/off
...
switch and a set of flags. Get rid of DEFAULT flags entirely. Print
warnings if on/off switches are not set, or are set incorrectly.
Add a shell function to simplify this on/off switch testing.
1997-08-29 02:24:04 +00:00
5b004f0ce6
ldconfig processes /etc/ld.so.conf internally; run it without cat'ing
...
the contents into an argument vector.
1997-08-26 19:35:33 +00:00
d10a9ab09b
Move ntpdate before `starting network daemons' to get cleaner output
...
during boot. Besides, it's not a daemon anyway.
1997-08-05 03:32:51 +00:00
2a376043c7
add apmd to /etc/rc and /etc/rc.conf per Lennart Augstsson in pr 3313
1997-08-03 22:24:20 +00:00
e53ae14bdd
Fix boot time vi recovery as reported by NAKAJIMA Yoshihiro in pr-3430
...
Really weird bug. On inspection, the shell code in rc looked fine, but
when tested, sure enough, the semantics of the shell were not what I
thought they were. Very unexpected to me, and obviously to the
hundreds of people who must have read those lines without seeing that
they were broken.
1997-07-31 03:35:39 +00:00
fb68fae55e
Move savecore up before named to get a dump on low memory systems and
...
move 'mount -a' between yp and nfs daemons.
1997-07-15 11:19:20 +00:00
4e045b6b43
Take 2 to get the mount order "right", taking care of possible LKM
...
loads before netstart this time.
LKMs can be loaded at 3 strategic places in /etc/rc - before netstart,
before "mount -a" and after all. "before netstart" works only if
the /usr filesystem is local (or on NFS, if root is too).
An additional field ("when") in lkm.conf controls when the LKM is
loaded.
1997-07-14 11:55:44 +00:00
a6fe27dced
Back out the last two commits for now till we find a better way to fix
...
the mount problems.
1997-07-11 12:01:06 +00:00
6553fa7064
rc.lkm needs /usr/bin/ld, so try to mount it with -t nonfs before rc.lkm.
1997-07-11 09:06:59 +00:00
d9dfde6362
Mount only "/" at the beginning (instead of all non-NFS filesystems).
...
This makes that the ordering of fstab is used for mounts which is
a) more intuitive and b) needed if {mfs,union,...} on top of NFS
is wanted.
1997-07-10 13:43:14 +00:00
650e452081
Before disk checks are performed, do a "swapctl -A -t blk" so that
...
block-type devices are available during disk checks, which may consume
large amounts of memory if large file systems are present. Once "critical"
file systems (e.g. /usr and /var) are mounted, perform a "swapctl -A -t noblk"
to enable swapping on any swap files that may be listed in /etc/fstab.
1997-06-25 23:30:28 +00:00
277b52f964
use swapctl instead of swapon
1997-06-12 15:18:58 +00:00
0dd1ac7fc9
Make xntpd put its pid in /var/run/xntpd.pid.
1997-05-11 05:08:16 +00:00
bf904a4665
Spawn a separate shell for netstart, making sure to check the return value
...
and exit with error if appropriate.
1997-04-29 04:58:38 +00:00
36b2c99667
Add support for an ntpdate_hosts variable.
...
settings:
NO: don't run ntpdate on boot
DEFAULT:extract a list of hosts from /etc/ntp.conf
otherwise, a list of hosts to poll with ntpdate
1997-04-27 23:17:56 +00:00
889bcd37bc
make motd update conditional on an rc.conf variable (update_motd), and
...
move it before interactive logins are possible (just in case).
1997-04-23 01:24:22 +00:00
8c70b4d638
move last items from rc.local to rc; rc.local is now actually for local stuff.
1997-04-19 03:10:57 +00:00
ec30dbdca7
Added mopd.
1997-03-17 00:02:02 +00:00
2564c9e659
When displaying the names for statd and lockd, include the `rpc.'.
1997-03-12 19:21:26 +00:00
773a52a313
Add . GC , which isn't used.
1997-03-12 19:15:16 +00:00
0e6463ba0a
Do the DEFAULT thing with mountd_flags. Don't output an extra
...
newline for statd and lockd.
1997-03-10 10:15:11 +00:00
40202c2514
Minor cleanup.
1997-03-10 09:34:59 +00:00
2069c0127b
If foo_flags is DEFAULT, run the program with a default set of flags. Most
...
users will use this, and therefore will never have to worry about flags
changing between releases. It's also a bit less error-prone.
1997-03-10 09:16:13 +00:00
ba3dca973c
Add configuration flags for lockd/statd, and start them if an
...
NFS server or client is configured and the flags are not NO.
1997-03-10 06:32:37 +00:00
ef538c3176
cleanup Lite-1 merge
1997-02-15 10:02:07 +00:00
ffabdc3a7a
oops; use $savecore_flags. from kilbi@rad.rwth-aachen.de
1997-02-07 08:59:18 +00:00
3b98afb4c5
move start-time configuration from netstart, rc, rc.local into
...
the new /etc/rc.conf. this also includes the following changes:
netstart: ifaliases now includes a netmask, to ensure
aliases work.
rc/rc.local: make _everything_ based on configuration
in rc.conf. also move things around such that DNS and
YP are started early enough that other daemons needing
their services also exist. move ldconfig from rc.local
here, and also make it use /etc/ld.so.conf if it exists.
run /etc/rc.lkm if it exists, a boot time.
1997-01-05 12:01:54 +00:00
c82951e68c
add inetd_flags, mostly from <jbernard@tater.Mines.EDU> in pr#2987
1996-12-04 12:55:33 +00:00
b0119cdb4c
add dhcpd startup; disabled by default
1996-10-03 07:11:35 +00:00
1986672399
move rpc daemon startup to after network startup so that if the machine is a DNS server and wants to resolve via itself, one doesn't have to wait for all the DNS queries to time out as each rpc daemon starts. This was particularly ugly with mountd.
1996-08-26 06:02:21 +00:00
7143a7612e
Quote the YP daemon flags variables.
1996-08-09 16:07:42 +00:00
2dfaa56a79
Change how the YP daemons are started. Previously, ypbind was always
...
started if the directory /var/yp exists. Now, ypbind, ypserv, and
rpc.yppasswdd are started like other daemons; there are flags variables
for these programs. To disable them, set the variables to "NO", otherwise,
their contents are passed as flags.
1996-08-09 10:29:44 +00:00
59b7f344f3
add note about why we use /usr/sbin/sendmail.
1996-03-22 03:20:53 +00:00
014cccd163
now that sendmail supports SIGHUP, call sendmail with full path.
1996-03-22 00:44:59 +00:00
8f1fa9720d
Add $mrouted_flags to netstart and use it in rc to start mrouted in a manner
...
similar (well, identical, really) to how $routed_flags is used to start
routed.
1995-12-30 01:30:03 +00:00
f82fcbac80
New-style RCS ids.
1995-10-08 18:11:40 +00:00
7fd0d8d882
fix typo in comment
1995-09-16 15:29:20 +00:00
040975e646
Conditionally start rbootd like rarpd and rpc.bootparamd, and disable
...
it by default.
1995-09-02 17:30:41 +00:00
cc833cb3e2
Fix typos in two comments.
1995-09-02 17:19:22 +00:00
4e7f37f974
Configure ccd devices before the filesystem checks, as suggested by
...
Thomas Eberhardt in PR #1408 .
1995-08-27 20:30:53 +00:00
bf98208622
Actually pass all the arguments to amd that we meant to. Reported by
...
Dave Leonard (D.Leonard@pleiades.newcastle.edu.au ).
1994-11-04 13:27:32 +00:00
97388e6c43
Create an empty mountdtab after removing it, to avoid getting a warning
...
from mountd on startup. Change $name_server to $named_flags.
1994-09-16 23:38:01 +00:00
f8a2565cb6
always check quotas (there is no reason not to try)
1994-06-27 21:14:19 +00:00
5759882532
quotas file(s) changed name in 4.4-lite
1994-06-24 07:51:59 +00:00
5a9c3f0a89
if install will do the trick, why not use it\?
1994-06-18 06:38:54 +00:00
5b65b3e00b
Update nfsd and nfsiod invocations.
1994-06-08 18:47:45 +00:00
7bb3055523
Move building of link editor cache from rc to rc.local, like in SunOS,
...
because the end user may need to add local directories to be searched.
And rc.local is a much more appropriate place for local changes.
I emailed pk on this matter, and he said that the overhead of not
having linker hints for the daemons started by rc would not be
significant.
This change also closes bug #217 .
1994-06-03 05:02:10 +00:00
fdc5a55aba
Attempt to make sure /var is mounted before futzing with it.
1994-05-29 19:10:22 +00:00
e846c118d8
Move code that cleans /var/run so that it is before the automount deamon
...
startup puts its pid file there (This addressess most of bug #217 ).
1994-05-29 03:37:33 +00:00
464e792795
add ttyflags -a, early on in rc.
1994-04-10 06:42:40 +00:00
31d422a3a0
keep amd pid in /var/run/amd.pid
1994-03-28 05:47:28 +00:00
3136bd9571
punctuation
1994-03-18 00:58:20 +00:00
4523219375
kill uucp lock files. from Mike Long <mike.long@analog.com>
1994-03-17 23:22:40 +00:00
e0ade9fbf5
slight change to the way AMD is invoked, to make it sensible for most uses
1994-03-14 04:14:13 +00:00
3ed8e27e29
make booting comments a bit cleaner
1994-03-09 04:02:58 +00:00
b09f56e8b1
automatically enable accounting and rotate logs
1994-02-26 03:29:23 +00:00
cf27654269
don't delete preserve files!
1994-02-01 00:36:34 +00:00
b6537fd765
Do the right thing for nvi.
1994-01-30 17:15:52 +00:00
645e8cd8d0
The cron daemon now lives in /usr/sbin
1994-01-13 18:43:50 +00:00
ed3483e8c2
Add bootparamd gunk.
1994-01-10 16:57:24 +00:00
59af92f761
Add rarpd gunk.
1994-01-10 16:43:06 +00:00
35a219c2bf
The cron daemon has been renamed from crond to cron. This name change
...
is from Vixie Cron 3.0, to make it like the 4.3BSD cron.
1994-01-05 21:35:25 +00:00
2fa59a6b60
start amd if requested
...
do nfs mounting after mountd has been started (so two machines can cross-mount
nfs from each other, else they hang if booted simultaneously)
1994-01-05 06:34:56 +00:00
61b54a3379
initialize rpc services in proper order
1993-12-16 04:02:23 +00:00
d1da713410
Use `.' to run rc.local, rather than starting another shell, so that variables
...
from netstart are passed on.
1993-12-15 07:24:31 +00:00
73b217910b
fix comment, add check
1993-12-01 01:38:21 +00:00
eafa1693d9
Put ldconfig later so it doesn't get wiped when reaping /var/run.
1993-11-26 20:11:44 +00:00
3d350fb581
Build ld.so.hints on each boot.
1993-11-21 21:06:46 +00:00
609bf6154c
more flags
1993-11-17 09:20:43 +00:00
1919837079
quote sendmail_flags test, from Patrick Bridges <patrick@buffy.cs.msstate.edu>
1993-11-17 09:19:35 +00:00
90a52de601
(1) clean up lots (rename fooflags -> foo_flags, etc.)
...
(2) implement suggestion made by Garrett Wollman of "sendmail flags"
to set flags passed to sendmail and/or turn it off
(3) document origins of variables
1993-11-07 10:36:48 +00:00
ae97749f6d
never rotate accounting logs, and turn on accounting the way done in net/2
1993-10-20 00:13:43 +00:00
3302edb38a
Use `-e fastboot', not `-r fastboot'.
1993-09-05 23:12:36 +00:00
5d5fd66358
it's clear that mountd started from inetd doesn't work
1993-09-01 09:43:33 +00:00
6ce6685814
mountd is now started by inetd.
1993-08-25 02:44:11 +00:00
70f813217a
Don't start rwalld - now started by inetd.
1993-06-11 00:39:31 +00:00
662c7885fb
prune dirs rm'd when cleaning tmp
1993-05-03 10:52:21 +00:00
mrg