and "tlb_exception: no copyin/out fault hander" panic in
audio_fill_silence() after audio playback on dreamcast.
The problem is tracked and fix is provieded by Ryo SHIMIZU,
who is the auther of aica(4) audio driver for dreamcast.
and non-const types, and the kernel uses both const and non-const
PMF qualifiers and device suspensors, so change the pmf_qual_t and
device_suspensor_t typedefs from "pointers to const" to non-pointer,
non-const types.
EINVAL in these circumstances. This can break audio in apps running under
Linux emulation (e.g. Citrix ICA client will mute all audio when volume
control used). Therefore, pass unrecognised ioctls attempted on dsp devices
to mixer_ioctl.
and make suspension by self, by drvctl(8), and by ACPI system sleep
play nice together. Start solidifying some temporary API changes.
1. Extract a new header file, <sys/device_if.h>, from <sys/device.h> and
#include it from <sys/pmf.h> instead of <sys/device.h> to break the
circular dependency between <sys/device.h> and <sys/pmf.h>.
2. Introduce pmf_qual_t, an aggregate of qualifications on a PMF
suspend/resume call. Start to replace instances of PMF_FN_PROTO,
PMF_FN_ARGS, et cetera, with a pmf_qual_t.
3. Introduce the notion of a "suspensor," an entity that holds a
device in suspension. More than one suspensor may hold a device
at once. A device stays suspended as long as at least one
suspensor holds it. A device resumes when the last suspensor
releases it.
Currently, the kernel defines three suspensors,
3a the system-suspensor: for system suspension, initiated
by 'sysctl -w machdep.sleep_state=3', by lid closure, by
power-button press, et cetera,
3b the drvctl-suspensor: for device suspension by /dev/drvctl
ioctl, e.g., drvctl -S sip0.
3c the system self-suspensor: for device drivers that suspend
themselves and their children. Several drivers for network
interfaces put the network device to sleep while it is not
administratively up, that is, after the kernel calls if_stop(,
1). The self-suspensor should not be used directly. See
the description of suspensor delegates, below.
A suspensor can have one or more "delegates". A suspensor can
release devices that its delegates hold suspended. Right now,
only the system self-suspensor has delegates. For each device
that a self-suspending driver attaches, it creates the device's
self-suspensor, a delegate of the system self-suspensor.
Suspensors stop a system-wide suspend/resume cycle from waking
devices that the operator put to sleep with drvctl before the cycle.
They also help self-suspension to work more simply, safely, and in
accord with expectations.
4. Add the notion of device activation level, devact_level_t,
and a routine for checking the current activation level,
device_activation(). Current activation levels are DEVACT_LEVEL_BUS,
DEVACT_LEVEL_DRIVER, and DEVACT_LEVEL_CLASS, which respectively
indicate that the device's bus is active, that the bus and device are
active, and that the bus, device, and the functions of the device's
class (network, audio) are active.
Suspend/resume calls can be qualified with a devact_level_t.
The power-management framework treats a devact_level_t that
qualifies a device suspension as the device's current activation
level; it only runs hooks to reduce the activation level from
the presumed current level to the fully suspended state. The
framework treats a devact_level_t qualifying device resumption
as the target activation level; it only runs hooks to raise the
activation level to the target.
5. Use pmf_qual_t, devact_level_t, and self-suspensors in several
drivers.
6. Temporarily add an unused power-management workqueue that I will
remove or replace, soon.
- Refactor pause attribute handling so that it it's preserved
appropriately and reset in audio_clear().
Now audio/jack-devel works with the native driver.
proclist_mutex and proclist_lock into a single adaptive mutex (proc_lock).
Implications:
- Inspecting process state requires thread context, so signals can no longer
be sent from a hardware interrupt handler. Signal activity must be
deferred to a soft interrupt or kthread.
- As the proc state locking is simplified, it's now safe to take exit()
and wait() out from under kernel_lock.
- The system spends less time at IPL_SCHED, and there is less lock activity.
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
- Add a lot of missing selinit() and seldestroy() calls.
- Merge selwakeup() and selnotify() calls into a single selnotify().
- Add an additional 'events' argument to selnotify() call. It will
indicate which event (POLL_IN, POLL_OUT, etc) happen. If unknown,
zero may be used.
Note: please pass appropriate value of 'events' where possible.
Proposed on: <tech-kern>
especially if that other expression is the right hand side operand of
&& which is short-circuiting. The effect was that audiorecord(1)
would always fail trying to set recording port with AUDIO_SETINFO.
Tested on wss@pnpbios. It looks like this problem has been reported
as PR/35239, filed against port-hp700.
doesn't obtain the ports, gain and balance related parameters.
Those generally require reading from the hardware and therefore are much
more expensive to obtain. Modify OSS emulation to use the new ioctl
where possible.
This reduces CPU usage of mplayer during mp3 playback with my Thinkpad
from 20% to < 1% and from 50% to 20% during Xvid playback.
Review and comments from jmcneill@
