Commit Graph

4507 Commits

Author SHA1 Message Date
tls
4924aa205a Load entropy at system boot (only works at securelevel < 1); save
at system shutdown.  Disable with random_seed=NO in rc.conf if desired.

Goes to some trouble to never load or save to network filesystems.

Entropy should really be loaded by the boot loader but I am still
sorting out how to pass it to the kernel.
2011-11-23 10:47:48 +00:00
darcy
77a099d5ff Allow pf flags to be specified in rc.conf.
Add default to defaults/rc.d as suggested by lukem@
2011-11-21 20:56:21 +00:00
tsutsui
e60b9ec2c8 Add an entry for romcons. 2011-11-20 17:21:15 +00:00
tsutsui
b05caac801 Create romcons device node. 2011-11-20 17:18:34 +00:00
mbalmer
f6673607c2 Better wording. 2011-11-19 17:30:09 +00:00
agc
a5b83a6434 grab major 203 for the iSCSI communications device (between kernel
driver and /sbin/iscsid)
2011-11-19 16:41:55 +00:00
jmmv
ccfedeb2ca Register directories for the new asm examples and their tests. 2011-11-12 01:19:40 +00:00
apb
bbc5f4100a The previous change made "nooutput -2" discard both stdout and
stderr, whereas it should discard only stderr.  This commit
should fix that problem.
2011-11-08 19:36:30 +00:00
apb
97355391d0 In the nooutput function, don't mess with file descritor 4
at the outer level; do it inside a subshell context so as not
to interfere with a different use of fd 4 by the caller.

This should fix PR 45590.
2011-11-08 19:11:19 +00:00
njoly
3f1f7fac1b +./usr/libdata/debug/usr/tests/lib/libtre 2011-11-07 13:39:54 +00:00
christos
d85ad0736b add libtre test directories 2011-11-06 18:45:04 +00:00
yamt
85ccb2e960 update RELEASEVARS 2011-11-02 16:39:23 +00:00
apb
bddc18304e Change the pattern for matching ttys to allow any number of digits,
(tty[0-9]*).  This should fix PR 45514.
2011-10-26 09:02:20 +00:00
christos
f78b488307 put back a commented out EXINIT entry. 2011-10-19 14:42:37 +00:00
dholland
3d0061d217 Re-enable EDITOR=vi because otherwise stuff breaks. (Or runs ed, which
is arguably equivalent to breaking.)

Per the discussion on tech-userlevel, document the settings offered.

(All of this needs quite a bit more work still.)
2011-10-19 11:27:26 +00:00
tsutsui
a27f299c14 Cleanup ancient entries derived from 4.4BSD Lite2 merge
for newer useradd(8) users:
- remove all aliases
- remove annoying EXINIT setting
- comment out other environment settings

Discussed on tech-userlevel@.
2011-10-19 10:14:35 +00:00
jmcneill
3ed028dc67 restart dhcpcd if we get a "released" event from the vmt0 driver 2011-10-17 23:27:41 +00:00
tsutsui
b1979e41c3 Make sure to put a.out GENERIC kernel into distribution. 2011-10-17 14:42:42 +00:00
mbalmer
e0c22d6455 Install, and add to the set lists, example code to illustrate Lua module use. 2011-10-15 13:00:59 +00:00
apb
a844ed90bd Exit with non-zero status when asked to create an unrecognised device. 2011-10-12 20:57:55 +00:00
njoly
7c1e53294f PR/45452: Fix pasto (found by tsutsui@) which prevented ra* device
special files creation.
2011-10-12 17:03:49 +00:00
tsutsui
f6bedb7e36 Create sysmon(4) devices. Noticed by Y.Sugahara. 2011-10-11 12:08:20 +00:00
mbalmer
63bfe64311 Link the gpio(4) Lua module to the build and add it to the set lists.
(There is no manual page yet, since we have not yet decided where to put
them for Lua modules.)
2011-10-08 13:14:03 +00:00
hauke
087ced08e5 Create the sysmon device node for the software watchdog 2011-10-04 10:55:53 +00:00
pgoyette
c2d58f1a39 Also re-add usr/include/dev/i2c to the mtree file 2011-10-02 19:31:45 +00:00
jmcneill
ab747348b5 Install dev/i2c/i2c_io.h and implement the API in the iic(4) driver.
Obsolete the I2C_SCAN option as this can now be done from userland.
2011-10-02 16:39:45 +00:00
christos
ca07041815 mention kern.tty.qsize requested by Matthew Mondor. 2011-09-25 21:47:22 +00:00
apb
b80ac66c04 Don't try to fsck root device if "/" is not mentioned in fstab.
Also don't assume that all network mounts are "nfs".
2011-09-20 12:13:21 +00:00
jruoho
4a45a29ad9 Move the tests/libc/ieeefp to tests/libc/gen to match the structure of libc.
Also rename the test files to gain functional scope.
2011-09-19 05:25:50 +00:00
jym
256df2d4a9 - use -q to test for presence of a sysctl(7) variable silently
- modify powerd(8) sleep_button script so it can handle the soon-to-be
Xen suspend command.
2011-09-17 14:44:18 +00:00
apb
00aba3793b Revert previous now that "make cleandir" uses bsd.clean.mk to clean
both the obj dir and the src dir.
2011-09-10 17:02:46 +00:00
riz
6fc3b870af Create and install an rc.d file for devpubd - a daemon to listen
on drvctl and autocreate device nodes in /dev for those which don't have any.
Set the default to "NO" for now.
2011-09-06 21:32:29 +00:00
apb
f11ca724cb Change foo*) case patterns to foo[0-9]*) in MD MAKEDEV.conf files,
as was done earlier today for the MI MAKEDEV.tmpl.  There are
also a few instances of slightly different changes in the
case patterns.
2011-09-06 14:40:10 +00:00
apb
99fac48d4f MAKEDEV dk<n> should create only the dk<n> device, but it previously
looped creating everything from dk0 to dk<n>.
Reported by M. Levinson.

Also add comments to cases where MAKEDEV loops creating multiple
devices.
2011-09-06 13:34:44 +00:00
apb
4bf21f27b6 In most case patterns, change foo*) to foo[0-9]*). There are also
a few where foo*) changes to foo|foo[0-9]*) or some other slightly
more complex pattern.

This should prevent "MAKEDEV foobar0" from accidentally matching
the foo* pattern when it should really give an error, and it
should make the order of the patterns less critical.
2011-09-06 10:54:03 +00:00
apb
ed56faf952 Use ${.OBJDIR}/NetBSD.dist.tmp instead of just NetBSD.dist.tmp.
This fixes a problem in which NetBSD.dist.tmp had been created in
the SRCDIR by an earlier build (performed without an OBJDIR), and
the existence of the file in the SRCDIR confused a subsequent build
(performed with an OBJDIR).
2011-09-05 09:57:02 +00:00
mbalmer
d88fd18413 Terminate line with a '.', not the word 'done', for consistency with other
startup scripts.
2011-09-02 07:13:28 +00:00
bouyer
9f200f93cc Add a INSTALL_LOONGSON kernel with a ramdisk.
build LOONGSON and INSTALL_LOONGSON for evbmips-mip64el
2011-08-29 18:32:18 +00:00
mrg
f385d8f556 add the device publish daemon, written by jmcneill@.
listens on drvctl for new devices and invokes MAKEDEV for them.

missing:
  - manual page
  - rc.d script
  - more testing

but it works well enough to make new disk nodes appear in /dev when
netbsd sees them and they're missing.  you will need to make sure
you have a new /dev/MAKEDEV for this to work properly (postinstall
should handle this normally, of course.)


thanks jared!
2011-08-29 11:38:48 +00:00
dyoung
581feba28b Straggler from last: add the directory for ppath(3) tests. 2011-08-27 19:02:29 +00:00
dyoung
9943264696 Build and install ppath(3), property-list paths library. 2011-08-26 21:22:07 +00:00
matt
b26c11e6b8 Build the GDIUM64 kernel (since it tests 16KB pages). 2011-08-24 16:03:34 +00:00
jym
cec3d05bda Arch-specific rc.conf files are not really autonomous rc.conf
files, they are appended to the end of etc/defaults/rc.conf.

So rename them to rc.conf.append for clarity, as suggested by mrg@. Adapt
Makefile accordingly.
2011-08-22 20:48:38 +00:00
jym
f56903492e Modify etc/defaults/Makefile so that architectures can specify an additional
rc.conf file. This one should reside under etc/etc.${MACHINE}/, and will
get automatically appended to etc/defaults/rc.conf at build time if present.

This is used by i386 and amd64 to append a small MD rc.conf(5) configuration
at the end of the defaults/rc.conf file, so that powerd(8) can be started
by default when we are running in a Xen environment. This is needed to support
save/restore functions for domains.

From all the alternatives proposed to fix that issue (from /etc/rc.conf
parsing in postinstall to etc/defaults/rc.conf arch-hooks) I believe
this one will appease everyone because it:
- does not touch etc/defaults/rc.conf template file,
- patches it at build time for MD hooks only when required,
- does not need to parse/modify a user-specified file like /etc/rc.conf (which
is a complex, error-prone operation),
- only enables powerd(8) by default when conditions are met (Xen environment)
while still allowing root to shoot himself in the foot if he wants to
override this manually in /etc/rc.conf.

See also http://mail-index.netbsd.org/tech-userlevel/2011/07/25/msg005246.html
2011-08-22 18:54:05 +00:00
phx
7084cee0f3 Turn off ttyE1-ttyE3 to avoid "Device not configured" messages after a
fresh installation with wscons disabled.
2011-08-21 10:41:51 +00:00
uwe
53fc796546 Revert previous as it introduces "Circular dependency on provision
`mountcritremote'".

route6d is "BEFORE: NETWORKING" and was made to "REQUIRE: mountcritremote",
but mountcritremote "REQUIRE: NETWORKING".
2011-08-18 16:46:14 +00:00
gdt
ef4e1527ca Make route6d REQUIRE: mountcritremote.
route6d is in /usr/sbin, and thus on systems with separate / and /usr,
/etc/rc.d/route6d can be run before /usr is mounted, resulting in
route6d mysteriously failing to start.
2011-08-17 16:39:29 +00:00
apb
7535058544 Allow "echo -n" to work as expected in rc.d scripts that are executed
by /etc/rc.  Similarly for printf with a format that does not end with
"\n".  Previously, the partial line would not be visible on the console
until a newline was printed, possibly after an annoying delay.

This is done by adding echo() and printf() shell functions to rc.subr,
so that naive use of the echo and printf commands in rc.d scripts will
call these functions instead of the underlying commands.  These shell
functions send a new "nop" metadata message after the partial line, and
the rc_postprocess function in /etc/rc disentangles the partial line of
plain output from the metadata "nop".

Also add a "-n" option to the print_rc_normal function in rc.subr,
and make some cosmetic changes.
2011-08-11 22:52:46 +00:00
mbalmer
a8d3ab0aa2 Print 'Keyboard encoding -> sg' instead of just 'encoding -> sg' on the
console.
2011-08-09 08:08:10 +00:00
jmcneill
abbd5e9f62 add -u flag that causes the MAKEDEV script to only create a device node if it
doesn't exist
2011-08-06 12:29:39 +00:00