3ae525eaa3
Sorry I forgot to commit this file..
2000-03-23 06:04:24 +00:00
dcd265af9c
GC unused variable.
2000-03-23 05:26:00 +00:00
e695f87102
Remove AWICTL stuff that is obsoleted by SIOC[SG]IFMEDIA and SIOC[SG]80211NWID.
...
Also, disable AWICTL completely until awictl.h appears.
2000-03-23 05:19:44 +00:00
7da71e5f9e
Make IPKDB working again.
...
Add support for i386 debugging and pci-based ne2000 boards.
2000-03-22 20:58:25 +00:00
1b83998bd7
Add bus_space_barrier.
...
Add DELAY in some busy loops to allow the dma engine to actually do something
(neccessary on fast processors).
2000-03-22 18:02:59 +00:00
5644a7e248
Update awi driver, which now supports AMD 79c930 based 802.11 DS cards
...
as well as 802.11 FH cards. Also, it can operate in infrastructure mode,
adhoc mode, and wi(4) (aka WaveLAN/IEEE) compatible adhoc mode.
2000-03-22 11:22:20 +00:00
b58a073f39
There's no need to frob cfg4/cfg5 in _attach(), since _reset() does it.
2000-03-22 03:27:56 +00:00
e32aed3c4e
Pass xfer size to disk_unbusy().
2000-03-21 19:47:59 +00:00
83446dedc1
- Test the generic device active flag instead of home grown one.
...
- Test also it in wdcintr.
2000-03-20 22:53:36 +00:00
424f6471cb
- Remove dead code.
...
- Make synchronous writes optional, disabled by default (*way* too slow).
- Handle case where dm_nsegs > CAC_SG_SIZE.
- Fix a couple of silly bugs.
- Fix use of __attribute__((__packed__));
2000-03-20 18:48:34 +00:00
d02615fe27
Install cac{reg,var}.h.
2000-03-20 18:07:59 +00:00
92d27d3c2e
Get rid of the powerhook when we detach.
2000-03-20 07:52:58 +00:00
979d79d931
Use sc_cfg4 for the Am53c974.
2000-03-20 05:48:28 +00:00
8b484a0264
NCR_SCSIREGS() and NCR_PIOREGS() are bogus. GC them.
2000-03-20 00:50:20 +00:00
41cd6b4fc9
Reset CFG4 and CFG5 correctly in the reset routine.
2000-03-20 00:49:42 +00:00
92c19e5ff7
Add suspend/resume hooks to ensure that the chip doesn't scramble memory
...
after an APM suspend and is unsnoozed after an APM resume.
2000-03-19 21:45:23 +00:00
b8e1812629
For the ESP406/FAS408, add sc_cfg4 and sc_cfg5.
...
Add a detach routine, and do the addref/delref.
2000-03-19 21:25:49 +00:00
6d04005134
Check for console input and output separately.
...
XXX - split input/output for /dev/console is not yet supported.
2000-03-19 12:42:45 +00:00
3f1373d9b7
Define separate flags for console input and output.
...
Allow console operations to be passed in attachment arguments.
2000-03-19 12:39:47 +00:00
b0ca3fa931
The soft-interrupt handler now returns void.
2000-03-19 10:38:43 +00:00
744ccf496c
Expose ncr53c9x_init().
2000-03-18 22:18:57 +00:00
c0b35f72c2
Adjust ncr53c9x_intr() prototype.
2000-03-18 22:09:32 +00:00
b1d2b97787
Change footprint of ncr5380_intr() to match normal interrupt handler usage.
2000-03-18 17:14:34 +00:00
1d1321109f
Use bus_space on MIPS.
2000-03-18 17:07:46 +00:00
0af581a1a1
Add a ncr5380_attach() routine which does part of the initialization, attaches
...
the scsibus, and does the addref/delref dance.
2000-03-18 16:13:22 +00:00
5960b2aec6
Move some code around in preparation for nca_pcmcia.
2000-03-18 13:05:20 +00:00
afaa5767a3
Match shutdown msg with that of cac.c.
2000-03-16 15:13:05 +00:00
a81a812b50
Remove unneeded field in 'struct cac_ccb'.
2000-03-16 15:07:22 +00:00
70063dc527
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 14:52:22 +00:00
f44ddd61a9
Do bus-specific interrupt handling (i.e. ahc_pci_intr) via a bus_intr
...
field in the softc, instead of relying on NPCI > 0. This would
prevent things from compiling if PCI buses were in the config file,
but ahc was attached only to something else than the PCI bus.
2000-03-16 10:33:45 +00:00
f9fd27ea3c
Fix an uninitialized variable. From Krister Walfridsson <cato@df.lth.se>
2000-03-15 22:41:29 +00:00
c38405d33d
Add power management support to the `tlp' driver. The battery on my
...
laptop lasts a whole lot longer now.
2000-03-15 18:39:50 +00:00
fbc4dbb7ac
Catch up to rearranged aic7*.h files
2000-03-15 07:17:06 +00:00
1e4647a15b
New ahc driver, a port of Justin Gibbs' FreeBSD driver. This adds
...
support for the U2W chips, and U160 controllers.
2000-03-15 02:08:28 +00:00
085f68836e
Common code for EISA and VL frontends for the ahc driver, split off
...
by Noriyuki Soda when updating for the new ahc driver.
2000-03-15 02:06:18 +00:00
797ac20035
Add power management hooks.
2000-03-14 21:20:51 +00:00
95054da1a1
Fix doubled 'the's in comments.
2000-03-13 23:52:25 +00:00
0391e3393f
Slight change to the SROM size printf.
2000-03-10 02:46:39 +00:00
9f86839658
change Mb/s to MB/s (Megabit to megabyte).
2000-03-09 23:19:26 +00:00
7e567738f2
support rfact. use manufac. suggested resistor values by default
...
clean up some comments
2000-03-09 04:20:58 +00:00
af00b7b880
split probe into generic and bus specific
2000-03-07 18:39:14 +00:00
c1b54794fc
Add missing `cnt++'.
2000-03-07 03:37:39 +00:00
7ce8a9f46b
Also, fix indentation in previous commit.
2000-03-07 03:34:52 +00:00
dfaacf6eab
Fix bug in previous.
2000-03-07 01:08:55 +00:00
6cc1408bca
Only print SROM size if TLP_DEBUG.
2000-03-07 01:06:12 +00:00
5eee9ca94c
Determine the size of the SROM by probing the chip using the standard Microwire
...
protocol. Eliminates the need for srom_quirks and some other trash.
2000-03-07 00:39:17 +00:00
064b1bd2e9
Fix obvious typo.
2000-03-07 00:33:13 +00:00
a183d34f04
- Implement cnbell() -- ring the console bell. The cn_bell entrypoint
...
is optional.
- Add cn_bell to statically allocated consdevs as appropriate.
2000-03-06 21:36:05 +00:00
a6f861574a
No longer necessary to futz with ifp->if_baudrate here.
2000-03-06 21:02:00 +00:00
9066b12bbb
Remove redundant assignment.
2000-03-06 10:21:46 +00:00
b16807c51a
Graphics card independant Bt485 code, derived from dev/pci/tga_bt485.c.
2000-03-04 10:25:57 +00:00
c4019af322
Definitions of standard TGA monitors as used by DEC.
2000-03-04 10:25:07 +00:00
7428bb6ffd
Definition of struct monitor, which contains syncs, and dot clocks.
2000-03-04 10:24:34 +00:00
fec44d6f55
Header for a generic RAMDAC that can be reused between different
...
graphics cards.
2000-03-04 10:23:39 +00:00
d8bf2eb8ef
- we didn't write enable toe config1-3 registers before trying to set the
...
media.
- read out original settings to find out what the defaults (EEPROM) for this
board were, instad of hardwiring to auto.
XXX the first might need further refinement. At least on my boards, 10baseT
doesn't work for 10baseT, only AUTO.
2000-03-03 21:37:18 +00:00
a5921b902e
Check if device is active in the interrupt handler and the one second
...
tick handler.
2000-03-02 01:21:56 +00:00
ac1b683642
Amend previous; pay attention to EX_CONF_MII on deactivate, too.
2000-03-01 20:53:11 +00:00
448dfa4249
Only detach PHYs if we have MII in the first place, and remove a bunch
...
of #if 0'd code which was copied from the Tulip driver.
2000-03-01 20:51:50 +00:00
c09a9a072f
Oops, pasto.
2000-02-29 11:14:46 +00:00
c627d45cc3
(fxp_init): don't clear the FXPF_MII flag as this results in a panic
...
when detaching
2000-02-28 10:16:17 +00:00
a87f80ad5f
Give the VPP bits better names.
2000-02-28 07:33:08 +00:00
71df610aeb
Remove no longer necessary workaround for hpcmips.
2000-02-27 22:57:20 +00:00
7b4eccb432
Use DPRINTF for debug messages.
2000-02-27 21:06:55 +00:00
61cc77895b
Some minor cleanup to the probe code.
2000-02-27 20:01:05 +00:00
6f1701b01c
Put a lock on the pcic, to serialize access to the chip during event
...
handling. This is important when multiple cards are present when
the system boots, as we use tsleep now instead of delay in various
places (delay used to provide serialization by virtue of not causing
a context switch).
2000-02-26 17:24:44 +00:00
49f1a84ad6
Be even more careful about cleaning up the socket at boot time.
...
Also, nuke the windows when the socket is disabled. (They might be deallocated
and reallocated, and would thus cause a conflict.)
2000-02-25 20:45:43 +00:00
7da6407d04
add (minimal, PIO only) support for the popular "Tundra Universe"
...
PCI-VME interface chip and a frontend for the "Bit3 Mod. 2706"
PCI-VME adapter
2000-02-25 18:22:39 +00:00
7dbe5be481
Disable all windows at boot time, to avoid conflicts when reading the CIS.
...
Also, GC a small bit of code that's inaccesible after the previous change.
2000-02-25 05:26:17 +00:00
ac4c520f05
If we fail to attach the socket driver, clear PCIC_FLAG_SOCKETP so that we
...
don't try to use the socket any further. (This will only happen if the user
explicitly unconfigured some of the sockets.)
2000-02-25 04:24:37 +00:00
1ccb9e8170
when change mbuf type, clear m_pkthdr so that we do not get panic with
...
old data in pointer fields. NOTE: we'll extend m_pkthdr field soon.
Wondering: do mbuf pre-allocation code in elink3.c really buy us much
performance? it comes with code duplicate/synchronization problem with
sys/mbuf.h...
2000-02-25 03:39:13 +00:00
f5f2ad429c
Initial import of National Semiconductor LM7[89] Hardware Monitor with isa and
...
pnpbios attach.
examples:
lm0 at pnpbios0 index?
lm0 at isa? port 0x290
TODO: spinlocks, i2c interface.
2000-02-25 02:17:43 +00:00
50062f0914
- Don't use bitfields.
...
- Cosmetic changes.
- Shut down all HBAs "simultaneously", not individually.
- Don't bother grokking HA_ST_MORE. It causes problems.
- Other bits and pieces.
2000-02-24 18:47:55 +00:00
3f9cf7572c
Don't use void * for chipset tags. Bad hacker, no biscuit.
2000-02-22 16:04:44 +00:00
32f100250f
Cosmetic changes.
2000-02-22 02:38:26 +00:00
8f2d14fbd1
added wmesg argument to pcic_delay debug printout
2000-02-21 20:16:22 +00:00
7f44584598
clen up some error messages
2000-02-21 19:18:53 +00:00
d88aecac57
Remove residual and now broken !ISP_NO_FASTPOST_SCSI code (which was
...
turning back on fast posting!). Redo fabric (re)login loop- don't try
and log out ports that haven't been logged in. Do correct target id
shuffling so we just always find the target ID we want. Add in support
for > 12 byte commands for parallel SCSI. Handle some Dual Bus reset
stuff. Finally fix ABORT COMMAND to use the right 16 bit order of the
handle to abort.
2000-02-19 01:53:56 +00:00
ff86abe827
Cleanup some printaouts.
2000-02-19 01:51:43 +00:00
b6dd4ddacf
Add in ISP_SWIZZLE_CONTINUATION macro.
2000-02-19 01:51:21 +00:00
8c2e6c73e3
Handle dual bus cases for immediate notify and enable lun commands.
2000-02-19 01:50:57 +00:00
98f7f7b5a0
Fix ITDEBUG macro
2000-02-19 01:50:25 +00:00
77dec43b22
Clarify cd_resid tag.
2000-02-19 01:50:03 +00:00
8405ee3752
Add in some mbox return codes that define when we've used up target
...
ids for doing fabric login. Define the 'Get All Next' SNS response
structure.
2000-02-19 01:49:47 +00:00
132107ce3b
Add a whole slew of registers found in the PCnet-PCI family.
2000-02-17 20:18:29 +00:00
50c84950f2
awi: rewrite to be higher performance.
2000-02-17 17:37:23 +00:00
7adb22cfa5
Add detach support.
...
Light cleanup.
2000-02-17 15:58:32 +00:00
1d373a94e2
Bump receive buffer size up to the maximum DMA burst boundary.
2000-02-14 17:14:28 +00:00
085f44145c
- Be more strict in status check before sending a command (make sure
...
DRQ is not asserted). Closes kern/9346.
- Change the "fake identify before the real one" by a delay(). The real cause
of the problem is that the drive is unresponsive just after a reset.
The real problem (and the solution) showed up after the first change.
2000-02-14 12:37:35 +00:00
1268cc5d6c
If we got an xfer from our backlog queue, don't allow sleeping; we're in
...
interrupt context.
XXX This is fixed properly in the thorpej_scsipi branch, but that won't
be ready for 1.5, I don't think.
2000-02-12 19:12:52 +00:00
01868857df
Add activate routine and check device active flag also in one second
...
tick handler.
2000-02-12 04:05:49 +00:00
fbc47bda30
Cosmetic changes.
2000-02-12 03:55:49 +00:00
1b188ee2ff
A lot of cleanup and shrinkage. Some items moved to isp_tpublic.h.
2000-02-12 02:33:34 +00:00
55a78c1ee4
Add in 12160 (Ultra3) support. Turn back on fast posting for the new
...
generateion parallel SCSI cards (1240/1080/1280/12160). Split up nvram
reading routines to be more readable. Fix topology reporting- 2200 has
connected topology in mailbox 6 when you're done getting your loop id
(supported: Private Loop (NL Port), N-Port, F-Port, FL-Port). The 2100
doens't report this, but we can synthesize it to be either NL-Port or
FL-Port. Add in some connection mode async events.
2000-02-12 02:32:21 +00:00
56e16448ad
add in 12160 (Ultra3) related definitions
2000-02-12 02:29:00 +00:00
9f63fdeefb
add in 12160 (Ultra3) NVRAM definitions
2000-02-12 02:28:32 +00:00
87355d841f
add some Qlogic 2200 point-to-point and extended ICBOPT definitions
2000-02-12 02:26:26 +00:00
50f2620822
add 80 MHz case
2000-02-12 02:25:28 +00:00
3f96822c3b
some minor cleanups
2000-02-12 02:24:20 +00:00
63c56a9de6
add a more public shared i/f to target mode
2000-02-12 02:23:13 +00:00
44b423d73b
always map attr memory 8 bit, since its defined that way.
2000-02-10 09:00:19 +00:00
d40e2b51ee
add detach code
2000-02-09 22:15:57 +00:00
e00270524e
ASIX AX88190 support (Planex FNW-3700-T and Melco LPC3-TX) from FreeBSD/PAO3.
2000-02-09 15:40:23 +00:00
99f529f0b3
- Since all resources are mandatory, no need to manage individually.
...
- KNF some code.
- Factor out some code into function.
- Disestablish an interrupt handler when failed to enable card power.
2000-02-09 14:42:33 +00:00
2a2d421881
Forgotten part of chopps\'s i82365_isasubr.c commit.
2000-02-08 17:56:58 +00:00
c7573d517e
- Bail out from attach stage if failed to enable card, number of iospace
...
or memspace is unexpected, failed to map iospace or failed to configure
the controller properly.
- Disestablish an interrupt handler if failed to enable card.
2000-02-08 12:49:12 +00:00
bfdc6759fb
Don't rely on the receive descriptor's BCAST/MCAST status bits. Test the
...
Ethernet destination address to see if it's multicast.
2000-02-08 00:22:13 +00:00
52a2804a5c
Add a new function call to the ISA DMA API: isa_dmamaxsize(), which returns
...
the maximum transfer size for the specified DMA channel. Make all clients
of ISA DMA use this call to determine their maximum transfer size.
2000-02-07 22:07:27 +00:00
e9a4467c58
Fix thinko in previous revision: it wouldn't catch deassert.
...
Revert the code inside the new test to the previous-but-one revision.
2000-02-07 02:17:18 +00:00
2da22cf2c5
Check for DCD status change interrupts which signal PPS events, even
...
if the line discipline is ignoring carrier (e.g., via comparam()'s
setting of sc->sc_msr_mask). Move PPS timestamp outside the normal
status-change processing, and ignore sc_msr_mask when testing
for PPS events.
2000-02-06 23:23:37 +00:00
958e687d69
LP64 printf fixes.
2000-02-05 20:02:42 +00:00
494c9affea
Support detach.
2000-02-05 18:11:55 +00:00
abac10f360
Yet anothor workaround for hpcmips. I guess real problem is somewhere else...
...
With rev.1.37, my MobileGearII for DoCoMo finds both ne0 and wd0
even if pcic_delay_sleep is 1.
With rev 1.40, it fails to find wd0.
2000-02-05 04:34:36 +00:00
2a46aa5d9a
Fix "unused variable" warning when FAILSAFE option is defined
2000-02-04 16:23:14 +00:00
b4edda97d5
Fix a compilation bug due to a missing parenthesys
2000-02-04 15:43:46 +00:00
9c688fd57c
s/SYSTEM/SYSMEM/; so that this file compiles again.
2000-02-04 11:04:46 +00:00
8006211b18
fix previous broken commit of the 8-bit memory handling (spotted
...
by Christian Hopps); this will enable 16-bit memory accesses for devices
that can handle it
2000-02-04 10:18:28 +00:00
0f09f8dd2b
cope with card insertion/removal during suspend-resume session.
...
(removal/ insertion after suspend and before resume)
How should we deal with card swaps?
2000-02-04 09:45:34 +00:00
d344dd94ab
keep track of the enabled state of a socket
2000-02-04 08:42:07 +00:00
ed0f41807d
- Call if_deactivate instead of smc91cxx_disable when deactivating.
...
- Fix typo in comment.
2000-02-04 04:05:50 +00:00
cbacaf54d7
Add AdvanSys U2W (LVD) boards support
2000-02-03 20:28:26 +00:00
579e538de0
fix promisc mode for smc91cxx again.
2000-02-03 16:20:49 +00:00
1102c5ed1d
Remove temporary workaround for hpcmips. Now it works without it.
2000-02-03 09:00:39 +00:00
d6554f3e25
Cosmetic changes; remove unnecessary semi-colon.
2000-02-03 08:59:20 +00:00
5802ccb9c9
In ahc_intr(), if initialization failed, don't try to service the
...
interrupt.
2000-02-03 06:25:09 +00:00
68a7084f0c
attempt to make this more like the std indicates
2000-02-03 06:07:06 +00:00
20522c36ed
Detach MII if there is.
2000-02-03 06:03:39 +00:00
eed75dbc26
Don't dry to diving MIIF_NOISOLATE in the PHY drivers. Instead, pass
...
flags down from the parent to child vi mii_attach().
2000-02-02 17:09:38 +00:00
b2cac6e684
if_detach for sm/pcmcia.
...
with addition of resource allocation flags in softc (to DTRT on detach).
2000-02-02 16:04:40 +00:00
f7096eef97
Fix typo; not PCIC_DEBUG but PCICDEBUG.
2000-02-02 14:23:48 +00:00
7a7a3bcfdf
handle attach failure in ne/pcmcia more carefully. (otherwise we'll
...
have trouble on detach)
2000-02-02 13:06:15 +00:00
f4e8883ccd
use a bit more standard (sys/device.h) prototype for {dp8390,ne2000}_detach().
2000-02-02 11:41:56 +00:00
a5f7a2c791
Detach rnd source in ep_detach(). Check for DVF_ACTIVE in epintr();
2000-02-02 11:00:48 +00:00
60e57afedd
- Check also DVF_ACTIVE bit in dp8390_intr.
...
- Delete ifmedia instances on detach.
2000-02-02 10:50:56 +00:00
a54d060a1c
Unhook the entropy source on detach.
2000-02-02 10:45:12 +00:00
500a12d2e5
- No need to wait in pcic_chip_socket_disable. It was intended to keep
...
some period between disable and enable in spec, but is done in
pcic_chip_socket_disable. And we also disable socket in pcic_deactivate_card,
we should do it in another way if it is really necessary.
- Shorten the wait message so that ps(1) and ps in ddb be happy.
- Replace newly added long delay with sleep.
2000-02-02 10:31:45 +00:00
e16a469c8f
Cosmetic changes.
2000-02-02 10:19:51 +00:00
17f5887294
implement if_detach code for ne/pcmcia.
...
XXX still incomplete, ne_pcmcia_detach() commented out for safery - please test
2000-02-02 10:00:06 +00:00
a909d816d2
Add detach support.
2000-02-02 09:34:51 +00:00
e4c766e299
Make sure to untimeout() things on detach.
2000-02-02 08:57:51 +00:00
82559ba682
Move detach operations around a little to simplify (and perhaps get it
...
right?). Prompted by Jason, itojun and myself.
2000-02-02 08:41:00 +00:00
84dc99fdea
Bring some order to the chaos which was the MII code function naming
...
"conventions".
2000-02-02 08:05:26 +00:00
ea45df4d30
Make sure to get rid of shutdown hook and ttach media on detach.
2000-02-02 08:00:21 +00:00
ea37d51548
do something more like pccbbs chip_enable. don't enable interrupts
...
until we have everything else setup..
2000-02-02 04:45:21 +00:00
001748dc57
First cut at detach support; doens't fully work yet.
2000-02-01 22:54:47 +00:00
d8e72e215d
implement probing for available irqs on non-cirrus pcmcia controllers
...
including cardbus controllers running in pcic mode
2000-02-01 22:39:51 +00:00
a72f993570
When possible, use ring mode for descriptors. Not only is this slightly
...
more efficient on genuine DEC chips, but some clones apparently Lose Badly
if you use chain mode. To further complicate things, some clones *only*
do chain mode, so make this whole mess conditional.
2000-01-28 23:23:49 +00:00
59fbdbb7cb
Just use a regular Tx descriptor for the setup packet; don't bother with
...
a separate one.
2000-01-28 22:23:58 +00:00
f18d4a028b
Define the fixed hme PHY addresses.
2000-01-28 15:52:34 +00:00
437ad6d192
Reset audio chip on device open.
2000-01-28 15:49:44 +00:00
cf83f4ae57
Use delay by default on hpcmips for now.
2000-01-27 01:05:17 +00:00
a697dac5f2
Back out a change I didn't intend to commit.
2000-01-26 06:17:59 +00:00
8949eab0cb
Split the code that reads the SEEPROM into its own file.
2000-01-26 06:04:37 +00:00
62c4800e7f
Argh - add initialization that got lost during editing of previous addition.
2000-01-26 01:23:32 +00:00
62fb37ba49
Some changes for the Xircom X3201-3 in 21143 emulation mode:
...
- The Xircom doesn't bring itself out of reset; we have to do it.
- The Xircom requires transmit buffers to be aligned to 4 bytes, too.
Partially from Rafal Boni (though the Tx buffer alignment issue is
handled much differently in this version).
2000-01-25 22:11:12 +00:00
da499b1e3a
make the wait_ready loop use pcic_delay() (thus tsleep) too for cards
...
that take a while to become ready
2000-01-25 19:38:18 +00:00
6aca67041c
Add a chip type for the Xircom X3201-3, and centralize the declaration
...
of the chip names array.
2000-01-25 19:29:17 +00:00
855fe23671
Prevent possible wayward loop.
2000-01-25 09:30:00 +00:00
5cb9984dd0
Replace long delay with sleep.
2000-01-25 09:17:35 +00:00
012a23a770
Use config_pending and let the kernel thread to attach a card even on boot.
2000-01-25 09:14:27 +00:00
8f7ad1f798
When checking for a non-standard address ROM format, allow the
...
Cobalt Networks address ROM through.
From Soren S. Jorvang <soren@wheel.dk>
2000-01-25 03:14:12 +00:00
ea0751f1aa
Finish with fixing the SOFTCURSOR stuff.
2000-01-25 02:44:03 +00:00
3d14a7c591
kluge to make this work with NEC M403 (arc/magnum).
2000-01-23 21:06:01 +00:00
b176cb0869
Add OPMODE_FD (full-duplex) to the media-related OPMODE bitmask. This
...
will cause the Tulip to be reset when this bit is toggled. This is
apparently required for some chip revs.
From Matt Thomas.
2000-01-22 21:05:53 +00:00
dc59bc1db3
Update for sys/buf.h/disksort_*() changes.
2000-01-21 23:39:55 +00:00
e716b4ba71
Fix register offset problem. This should make EISA boards work correctly,
...
and is also needed for the ISA frontend (some time this week).
2000-01-18 16:50:38 +00:00
9efabde18b
Rearrange ex_intr() to use C_INTR_LATCH the same way the ep driver does,
...
to prevent race conditions.
2000-01-18 03:35:40 +00:00
e9100143aa
in promisc mode, don't inject outgoing packet to bpf twice.
...
this is because the card gets the outgoing packet from itself in promisc mode
(not really IFF_SIMPLEX).
2000-01-17 07:06:57 +00:00
638e1a6958
Improve the downgrade logic:
...
- If UDMA 2 is failing try UDMA 1 first, it helps in some cases
- downgrade if we get an error in the first 4000 xfers, or if we get
4 errors in 4000 xfers if the first 4000 went without troubles.
While I'm there commit a local change I have since some time to get my CD
probed: issue a "blanck" IDENTIFY before the one used to detect slave ghosts,
with my drive the first IDENTIFY following a controller reset fails with an
aborted command ...
2000-01-17 00:01:00 +00:00
d2d4da8b08
Be consistant when printing haHHBA status.
2000-01-16 14:08:42 +00:00
c02df4a16e
Typo. Don't worry, nothing that will cause system instability or data
...
corruption.
2000-01-15 18:13:22 +00:00
d2d9ade964
Validate EATA signature in returned EATA configuration data before anything
...
else. More proper than important.
2000-01-15 18:10:32 +00:00
035b04d47a
UltraMode is okay for SBus cards with chiptypes of 1020A.
2000-01-14 08:46:37 +00:00
31188c7a4b
(tcic_chip_do_mem_map): handle 8-bit memory
2000-01-13 09:38:17 +00:00
4bc55bd307
(pcic_chip_do_mem_map): handle 8-bit memory
2000-01-13 09:00:30 +00:00
192e087585
Make PCDISPLAY_SOFTCURSOR work as it should.
2000-01-12 14:42:21 +00:00
e8a27771a7
remove unused llc from receive logic, protect use of llc header in tranmist
...
logic, fixes pr#9151
2000-01-09 17:32:58 +00:00
f3b56e33df
rename hl_control to hl_ffb (friendly fudge byte) as per cisco insider
...
the belief is that this was used to align OSI clnp header fields better
2000-01-09 14:47:43 +00:00
15e3ae96fb
pass iso pdus to netiso
2000-01-08 20:46:29 +00:00
ddd5fcbf66
Remove tinfo_t symbols which result in never used global common variables.
2000-01-07 08:12:15 +00:00
1204bc3a13
Bump up level of some very verbose debugs so that SCSIDEBUG doesn't cause them
...
to print.
2000-01-06 23:02:51 +00:00
f90308c0b9
Bump default login time to 60 seconds. Move the spot at
...
which we claim we've seen the loop up at least once so
that we don't hang forever coming up. Add in the basics
for MI target mode stuff. Force the outer layers to deal
with a FCP response coming back that has a CHECK CONDITION
but no sense data.
2000-01-06 03:02:11 +00:00
92f150a791
roll revision level and add some taret mode changes
2000-01-06 03:00:11 +00:00
02f6f85175
add the enable target mode command, plus some minor fiddles
2000-01-06 02:59:43 +00:00
bc8be11468
add isp_print_qentry inline
2000-01-06 02:56:20 +00:00
dc86769bb7
Add in MI target mode code modules
2000-01-05 19:50:05 +00:00
e75404417a
Add and use pcdisplay_cursor_init(). Still a couple of nits with this, I
...
will resolve when I can test properly.
2000-01-05 16:14:35 +00:00
ea89296a61
Back out previous. A proper fix will follow.
2000-01-05 16:04:00 +00:00
d8a4f43d0f
convert to support non-dma IO (for the isa Riscom/N2).
...
allow the user to set and use the internal baud rate generator
fix the transmission ring logic to support more than 1 frame per interrupt
add autodetection of the base clock frequency.
cleanup the receive ring logic
support dynamically resizing the low-water mark on the fifo in response
to buffer underruns on transmit.
2000-01-04 06:36:29 +00:00
9aeb6a25d2
minor KNF tweaks
2000-01-02 02:08:07 +00:00
b38548c58d
On a cold suspend to disk, the Sony VAIO Z505 BIOS appears to not
...
preserve enough of the state of the PCIC to keep it interrupting on
card insertion/removal..
Add a power hook to notice if the CSC_INTR device register is zeroed
on resume, and if so, reset it to a sane value.
2000-01-01 21:57:45 +00:00
6d88cc0622
- Make sense out of comment on dpt_wait().
...
- Trivial streamlining of logic in dpt_poll().
2000-01-01 19:56:59 +00:00
6b0de2aa24
Off by one error in station events.
1999-12-27 22:41:04 +00:00
711fcf6e2f
Add some defensive code to the unsolicited event printing
1999-12-23 18:14:59 +00:00
ba7b2b4124
Make the bitfields in here work on big-endian machines. How this ever
...
worked is unclear.
Patch from thorpej, tested by me.
1999-12-23 00:15:12 +00:00
b95651b752
set carrier early if used as console or kgdb line, fixes PR kern/6547
...
by Andreas Gustafsson, gson@iengines.com
1999-12-21 11:04:36 +00:00
955d4bb00b
clean up some f/w revision stuff. clean up some dualbus stuff.
1999-12-20 00:39:16 +00:00
83931d33df
clean unused fwrev stuff
1999-12-20 00:38:21 +00:00
8f18ef5b45
restore (by request) CFGPRINTF to DIAGNOSTIC level kernels
1999-12-20 00:37:49 +00:00
85a78db7b1
Add support for selecting a PHY (i.e. built-in transceiver vs. external MII
...
device) by using media/instance parameters.
1999-12-18 14:05:37 +00:00
60eeab910b
Avoid feeding negative values to the `roundup()' macro.
...
Configure the MII management interface earlier.
1999-12-17 14:37:15 +00:00
onoe