9a61ce5bff
When clearing the entire display, point to the start of the framebuffer,
...
not start of console output. Also, do not advance by ri_delta every row.
1999-08-25 08:45:25 +00:00
de9efb01d3
- Fix an error in cursor image manipulation. I learned a pair of Bt431
...
were populated in reverse order from PMAG-A MX ...
1999-08-25 07:56:22 +00:00
0bdb76e5cf
- 24bit per pixel TX framebuffer occupies 0x600000.
1999-08-25 02:02:22 +00:00
3844ce8324
Spelling.
1999-08-25 00:59:08 +00:00
aa550d38fb
Regenerate.
1999-08-24 21:32:25 +00:00
fa181849a2
Add Intel i740.
1999-08-24 21:32:04 +00:00
205c3f5a73
Regenerate.
1999-08-24 21:25:52 +00:00
82cb092b79
Fix typo in comment.
1999-08-24 21:25:22 +00:00
766b5fef17
Regen.
1999-08-24 17:48:31 +00:00
7a80808434
Add Allied Telesis LA-PCM (NE2000 compatible) and Contec C-NET(PC)C
...
(MB8696x based) pcmcia ethernet cards. Patches supplied by
Kawamoto Yosihisa in PR kern/8260 and kern/8261.
1999-08-24 17:47:44 +00:00
5cfe8783f9
Regen.
1999-08-24 12:47:20 +00:00
416c42cc34
Add AdLib MSC 32 Wave PnP board (wss audio device).
1999-08-24 12:46:55 +00:00
7f2b1ba8f2
- Change the semantics of rasops_init slightly
...
- Re-name rasops_setfont to rasops_reconfig
- Add some new run-time 'features'
- Bring all run-time 'features' under control of rasops_info::ri_flg
- Some cosmetic changes
1999-08-24 11:07:31 +00:00
1f2661798f
Make sure to mark the device as dying already in the (de)activate routine.
...
This avoids access to it before the detach routine has blown it away.
1999-08-23 22:55:14 +00:00
007da22e55
At attach time, get and print (parts of) the IEEE 1284 device id.
1999-08-23 22:35:19 +00:00
70020635c3
Regen.
1999-08-23 16:54:13 +00:00
c206e4ab37
Add a Kawatsu mouse.
1999-08-23 16:53:32 +00:00
65cfdf2877
Disable inclusion of debugging code by default.
...
Turn compile-time flag I82586_DEBUG into a boolean switch.
1999-08-23 12:12:42 +00:00
9fceb1947d
Do not report "spurious interrupts"; this is a relic of the PC-only
...
days of this driver.
1999-08-23 12:00:11 +00:00
592de98a19
Remove some unneeded needs-flag.
1999-08-23 07:07:47 +00:00
4c217fdaf8
Merge the soft_{td,ed} with the real {td,ed}. This saves time and space.
...
(And fix typo in corresponding uhci change.)
1999-08-22 23:41:00 +00:00
cc8b61583c
Merge the soft_{td,qh} with the real {td,qh}. This saves time and space.
1999-08-22 23:19:56 +00:00
be7e2fac07
More things to do...
1999-08-22 22:24:25 +00:00
1de0531d8b
Simplify ulptwrite() by calling usbd_bulk_transfer(). This also makes
...
it interruptible.
1999-08-22 22:22:43 +00:00
f747201099
Move more of the transfer completion processing to HC independent code.
...
Fix some problems with transfer abort & timeout.
1999-08-22 20:12:39 +00:00
5d8adfb5a2
Disable interrupts early.
1999-08-21 21:35:36 +00:00
a293a6cc73
Make sure not to call tsleep() from suspend/resume routine.
1999-08-20 16:42:38 +00:00
1705bbe96b
Get rid of ugly vertical bars which occurred when
...
character-cell boundaries != byte boundaries.
("width" (despite the poor name) should be computed based on the
*old* value of bg, not the *new* one.)
Fixes PR 8221.
1999-08-20 06:46:44 +00:00
be5fe633b8
clean up attach messages slightly.
1999-08-20 03:36:59 +00:00
f28eb7f5cc
make alpha compiler happy
1999-08-19 21:29:04 +00:00
0f99933822
Use the right type for the size argument when calling usbd_bulk_transfer().
1999-08-19 19:57:21 +00:00
a9563e089b
A first stab at making the UHCI driver endian independent.
...
(It doesn't seem to be quite working yet.)
1999-08-19 19:52:38 +00:00
c0f0486836
Add a utility function, usbd_errstr(), to print error strings. From FreeBSD.
1999-08-19 19:51:36 +00:00
462e2614ff
Add some mass storage definitions.
1999-08-19 19:50:42 +00:00
afb0c7b853
Make this compile. Patch from Simon Burge.
1999-08-19 11:20:34 +00:00
f625e72668
Regen.
1999-08-19 08:06:50 +00:00
93f86e5ed5
Recognize a 3Com 3c509 Combo configured in EISA mode. Fixes PR kern/8234
...
by Thomas Pfaff.
1999-08-19 08:06:31 +00:00
fd59bba7cb
after bus_dmamem creating some memory, zero it out. This has stopped
...
my alpha from getting COMMAND FAILED on random boots.
1999-08-19 00:43:45 +00:00
bf35d2940c
Add some more items.
1999-08-19 00:31:40 +00:00
1107c3f6ea
Back out last change. The ugliness of the Audio Class should not have
...
to pollute the general USB definitions.
1999-08-18 07:55:19 +00:00
7fb139742d
Update the endpoint descriptor struct with the two oddball entries
...
that only the Audio Class has.
1999-08-18 07:45:56 +00:00
54adf47f36
Redo the UHCI data toggle handling.
...
Make sure data toggles get synchronized on open and
when clearing an endpoint stall.
1999-08-17 20:59:04 +00:00
a47874ac23
correct a comment
1999-08-17 16:15:05 +00:00
3016e1ebe0
Make some small changes to make it compile on OpenBSD.
1999-08-17 16:06:20 +00:00
f61d8fd937
regen
1999-08-17 09:42:14 +00:00
c8aabedc83
-mention a location where the old PCI database can still be found
...
-add Alteon Gigabit Ethernet
1999-08-17 09:40:25 +00:00
e71ad5a0ac
The CCB already contains its DMA address, so no need to recompute it
...
over and over.
1999-08-17 02:09:47 +00:00
24f66ce158
Get rid of FreeBSD code; there was so little to share in this driver
...
that it should be split.
1999-08-16 23:36:25 +00:00
f7c5edea20
Mention mux # when ignoring it for the console.
1999-08-16 23:22:22 +00:00
03946f957a
Added Solidum Systems PCI vendor ID and Device IDs
1999-08-16 21:36:39 +00:00
9a0281ff87
Some new ioctl()s for the umodem driver.
1999-08-16 20:27:55 +00:00
aa7264892d
Implement a modem driver for the Abstract Control Model, i.e. AT commands.
...
It is accessible through the usual tty abstraction.
XXX The driver needs better error handling and a special call device.
XXX It also needs more testing.
1999-08-16 20:26:53 +00:00
290c03447b
Change the way transfers are dequeued so thet we know that they
...
are removed from the queue before being deallocated.
1999-08-16 20:24:33 +00:00
23fa3682af
Remove some, add some.
1999-08-16 20:21:09 +00:00
72b1f5a4b0
Add more CDC definitions.
1999-08-16 20:20:19 +00:00
7e4e93390d
Change DIAGNOSTIC behaviour a little.
1999-08-16 20:19:55 +00:00
df65083b45
A small roadmap of the USB files.
1999-08-16 20:18:07 +00:00
a01d72e890
Fix several LP64 problems, and clear up kernel pointer vs. physical
...
address confusion. This driver now works on the Alpha.
1999-08-16 02:01:11 +00:00
770de7bb5a
Print a error message instead of panicing in rf_RecoveryPQFunc().
1999-08-15 03:44:46 +00:00
d516e7b571
Make these compile with RF_INCLUDE_RAID6.
1999-08-15 02:36:40 +00:00
ff6d7dd494
Cleanup a bit.
1999-08-15 02:36:03 +00:00
07cc4855f1
Minor cleanup. No functional changes.
1999-08-14 23:34:18 +00:00
48f055e09b
Add missing MPU interrupt glue.
1999-08-14 22:42:16 +00:00
4ba14d22b0
Fix an 'off-by-one' error in a RF_ASSERT which meant that a reconstruct
...
would panic in the case where the stripe width was 1 block.
1999-08-14 21:44:24 +00:00
19570e813c
Implement opl at wss.
1999-08-14 21:19:29 +00:00
7b34e008a9
Forgot to initialize a pointer; from Simon Burge.
1999-08-14 15:05:02 +00:00
b8b1e35ece
Some changes from FreeBSD (no functional differences).
1999-08-14 14:49:31 +00:00
23906f1d41
defopt COMPAT_14
1999-08-14 14:40:08 +00:00
7317aa4924
make it report the correct ISA port range
1999-08-14 14:32:12 +00:00
b6c7adba38
Regen.
1999-08-14 13:43:27 +00:00
3622436247
Add support for 3Com 3CXEM556B-INT as suggested by Noriyuki KOIZUMI in
...
PR kern/8188.
1999-08-14 13:43:02 +00:00
6b7eee9252
Initialise "error" in wsmux_detach_sc() before testing if it set.
1999-08-14 11:40:31 +00:00
4882320d4b
Initialize error variable. Should fix spurious init errors.
...
From Dave Huang in PR 8205.
1999-08-14 11:23:39 +00:00
af827a1284
Remove dulicate "Ethernet" output. From Dave Huang in PR 8206
1999-08-14 11:09:18 +00:00
b23490d39f
Implement timeout and abort of requests.
...
Compute length of short transfers correctly.
1999-08-14 08:56:09 +00:00
740b9848cc
Decrease the number of outstanding IO's threashold slightly.
...
The previous value may have been too high in some instances.
1999-08-14 03:47:07 +00:00
6409e641a6
Remove a 'struct proc *'-passing abomination that's been bugging me
...
for quite some time.
1999-08-14 03:10:03 +00:00
4a058e82c5
Correct and/or improve detection of bogus row/column values
...
passed in via ioctls.
1999-08-14 02:41:36 +00:00
a7510095cc
Pass color index through ri_devcmap; don't assume that it already
...
matches the device's color map.
1999-08-13 09:45:46 +00:00
db2eaf18cf
rf_sys.h does not need to be #included in any of these files, and, actually,
...
is no longer needed at all.
1999-08-13 03:41:52 +00:00
1ec5208866
This file is no longer needed.
1999-08-13 03:31:20 +00:00
1aa6ce1041
Garbage collect rpcc().
1999-08-13 03:27:46 +00:00
02acd1910a
First kick at cleaning up the RF_ETIMER code. New timer handling code
...
provided by Peter Galbavy via OpenBSD.
1999-08-13 03:26:55 +00:00
eca431e87c
Nuke configuration of ETimer stuff during main configuration.
1999-08-13 03:25:01 +00:00
5cab826918
Clean up reconstruction accounting a bit. While it worked before, it was
...
slightly broken in the case where the RAID set did not support reconstruction.
1999-08-13 01:43:33 +00:00
59af828a94
Regen.
1999-08-12 09:43:18 +00:00
7c3cb9c796
Add Promise Ultra66, change entry of Ultra33 to reflect the fact that can
...
"only" do ultra/33.
1999-08-12 09:42:11 +00:00
ae6f518821
Garbage-collect CCDF_SWAP; no longer used, and doesn't make any sense
...
with the UVM swap code.
1999-08-11 02:44:35 +00:00
dd5ae858e0
We really only need *one* componenet buffer pool...
1999-08-11 02:41:02 +00:00
33e458640f
Garbage collect unused struct rf_test_acc.
1999-08-11 02:20:35 +00:00
31b98d3572
When reporting the status of a component during configuration,
...
provide more intuitive information about whether a component is clean
or not.
1999-08-10 22:56:20 +00:00
620eda50c7
Don't allow reconstructs, copybacks, or forced failures of components if
...
using a RAID 0, since RAID 0 can't handle those sorts of things.
1999-08-10 22:46:59 +00:00
0b08c839eb
Don't go ape if there is a problem verifying the parity. Note the condition
...
and inform the user (as opposed to panicing the system!).
1999-08-10 22:19:27 +00:00
49efd10006
Oops. Make minor change that I forgot when adding the parity check ioctl.
1999-08-10 21:41:37 +00:00
a3aefdaee3
Add support for easily checking the parity status from userland.
...
Also: spl protect rf_RewriteParity().
1999-08-10 18:18:30 +00:00
a531d8c31e
Trying to rebuild parity on a degraded set is bogus, so don't allow that.
...
Also, check sooner for a RAID 0 set, since rewriting parity makes no
sense there either.
1999-08-10 01:53:26 +00:00
26db0bba90
Garbage-collect C_INUSE and C_NEEDDONE.
1999-08-09 09:56:00 +00:00
5885dbb878
- use pool(9) for wdc_xfer, instead of managing a free list.
...
- fix printing of Ultra-DMA modes (shows up when the drive supports highther
modes than the controller).
- Don't use C_NEEDDONE anymore. We were setting this flag in a possibly
freed wdc_xfer (this didn't create problems, as it was free'd in the POLL
case only, while IRQs are blocked, but it's not good practice anyway
and pool(9) complains about it ;)
1999-08-09 09:55:18 +00:00
7eb1fae5d3
Add a missing 'return' in previous commit.
...
Don't use C_NEEDDONE anymore (it's safe to always call scsipi_done()).
1999-08-09 09:49:48 +00:00
7e874499c9
Don't call wddone() from _wdstart(), the ata_wdc system will do it now.
...
call wd_flushcache() with the proper flags (especially don't set
AT_WAIT | AT_POLL).
1999-08-09 09:48:04 +00:00
c0da6c9129
Don't use C_NEEDDONE, it's deprecated.
1999-08-09 09:43:11 +00:00
148c244c15
Driver for the DEC SGEC, Second Generation Ethernet Controller.
1999-08-08 11:41:28 +00:00
38de172f03
Add usbd_set_hub_feature() and usbd_clear_hub_feature().
1999-08-07 23:14:17 +00:00
d6331b4ef4
Some new items.
1999-08-07 15:05:46 +00:00
cdfc12a291
Make it possible to open wskbd devices for write (i.e. ioctl) even
...
if it is already open.
1999-08-07 15:04:35 +00:00
a8d8fc178f
Fix a typo.
1999-08-07 07:36:19 +00:00
ec368bb906
Fix a problem uncovered by attempting to compile on the Alpha: overrun_buf
...
was being initialized to a KVA, when we really wanted a DMA address. Change
the code to allocate the overrun buffer with the control blocks, and
properly initialize overrun_buf.
Note that overrun_buf cannot actually be shared between all boards; DMA safe
memory could vary from bus to bus.
Garbage-collect two functions which are no longer used because of the
above changes.
1999-08-07 07:20:15 +00:00
6b33521af9
Increase several timeouts to 30s.
1999-08-07 02:51:51 +00:00
fae9929734
- Add some debug printf (WDCPROBE) in _wdcreset_wait(), I've needed these
...
2 times in the past
- Set up timeout per xfer instead of per interrupt. This helps with
PIO transfer (we would call timeout()/untimout() several times for a
transfer).
- If we missed an interrupt for a PIO transfer, reset and restart it
immedialy, don't try to recover and continue. If we missed an interrupt we
may have lost a read/write cycle on the IDE bus. If this happens 1) we
corrupt data and 2) we enter an interrupt loop at the end of the xfer, as
the drive has some more data to read/write, but the host thinks the xfer is
done.
This last change fix the (or at last some of the) 'lookup after lost interrupt'
some peoples have been experiencing.
1999-08-06 12:00:23 +00:00
0ef6a875b8
regen for updated pcmciadevs
1999-08-06 06:39:57 +00:00
1780131e5c
add an entry for the IBM EtherJet Ethernet PC Card (cs8920 based)
1999-08-06 06:39:29 +00:00
03c29debf5
Make this file compile again.
1999-08-05 11:25:47 +00:00
191ab2b8e4
Since we have to go through fxp_init() to properly handle IFF_ALLMULTI
...
anyway, take advantage of this and greatly simplify the programming
of the multicast filter. This solves the last reported "device timeout"
problem with this driver.
1999-08-05 01:35:40 +00:00
439a6c4942
Add missing prototype for read_tekram_eeprom() to make driver compile if
...
"options NCR_TEKRAM_EEPROM" is specified in the kernel configuration file.
Patch supplied by Hans Hoppe in PR kern/8141.
1999-08-04 20:51:31 +00:00
d1ffb22ab2
"files" also needed.
1999-08-04 19:13:05 +00:00
1aa825ae03
Converted to (mostly) MI code.
1999-08-04 19:12:22 +00:00
7bff22bddc
Catch a console configuration error. Instead of jumping through cdevsw indexed
...
on major(NODEV), call panic...
1999-08-04 14:40:54 +00:00
fe98b81a44
Get the dependencies on NWSMUX right (I hope).
1999-08-04 11:26:04 +00:00
84d5e946e6
Use NMPU not NMIDI around call to mpu_intr.
1999-08-04 10:50:52 +00:00
c1c87dde4a
Add another file I forgot in my MPU changes.
1999-08-04 10:46:34 +00:00
cb6ed03a59
- Replace device node names of zskbd/zsms into lkkbd/vsms, respectively.
...
No functionality was changed at this moment.
- Apply recent changes in GENERIC to TCWSCONS.
1999-08-04 07:17:50 +00:00
5ea625fe90
Almost completely rewrite the receive logic, making it as close as possible
...
to the EPIC/100 driver's (adjusting for the fact that Intel Ethernet chips
are from Pluto):
* Don't allocate receive buffers until the interface is actually brought
up, and release all of them if the interface is taken down.
* Add a knob (defaults to off) which will copy an incoming packet to
a single header mbuf if it is small enough to fit in one, rather than
burning an entire cluster on it. Note that this change will be mostly
moot if/when sbcompress() is changed to handle compressing clusters.
Simplify some of the receive list logic:
* Rather than using a homegrown queue and additional software RX descriptors,
use an ifqueue to queue receive buffers, and M_{GET,SET}CTX() to hook DMA
maps and receive buffers together.
Clean up a bit:
* Macroize a bunch of things to make the code a bit easier to follow.
1999-08-04 05:21:18 +00:00
11e9392b3e
Only tick the MII if we are using it.
1999-08-04 00:17:28 +00:00
0ae14b58eb
Be a little less selective in the transmit interrupt path.
1999-08-04 00:14:08 +00:00
f1c6287a6e
Use the Interrupt bit in the command block to generate interrupts, rather
...
than interrupting after every Command Unit Not Active event.
1999-08-03 23:37:14 +00:00
1051ab605d
G/c a flag.
1999-08-03 23:18:32 +00:00
5c2b83a0ad
Don't bother with interrupt-driven multicast setup.
1999-08-03 23:18:09 +00:00
3012cf91af
Completely rewrite the transmit logic, making it look more like the
...
EPIC/100 driver's. Also, fix the "all multicast" logic. Also do some
general cleanup.
1999-08-03 22:43:28 +00:00
e0c8203cb3
Nuke unused #define.
1999-08-03 22:07:39 +00:00
f04cb4036f
move common support functions for phy drivers from mii.c to mii_physubr.c,
...
so that they are not includes if no PHY is configured
(avoids code bloat if an interface driver has the "mii" attribute but
mii is not used by the particular version)
1999-08-03 19:41:49 +00:00
4bd8f1566c
Be a little nicer about memory usage:
...
* Don't allocate receive buffers until the interface is actually brought
up, and release all of them if the interface is taken down.
* Add a knob (defaults to off) which will copy an incoming packet to
a single header mbuf if it is small enough to fit in one, rather than
burning an entire cluster on it. Note that this change will be mostly
moot if/when sbcompress() it changed to handle compressing clusters.
1999-08-03 17:25:51 +00:00
dbb71e4b35
Add the file I forgot at the previous MPU changes.
1999-08-03 00:27:27 +00:00
208dad78d1
Get data toggle right for short bulk transfers.
...
(XXX This code needs to be rewritten.)
1999-08-02 23:35:55 +00:00
caffcd4895
Another debug message.
1999-08-02 19:49:50 +00:00
2d4d29a1fa
Test return values the right way.
1999-08-02 19:36:48 +00:00
094852eb36
Change it so that a pipe can be open RW instead of just R or W.
...
This makes close() work properly, but it is still not ideal. Perhaps
there should be different device nodes for input and output on to
and endpoint with the same number?
Pay attention to the SHORT_XFER_OK ioctl().
1999-08-02 19:32:56 +00:00
d2db832909
Do abort of transfers in a sane way. Fixes PR 8041.
1999-08-02 19:30:34 +00:00
42fb510148
Move the mpu device declaration to conf/files.
...
Let the mpu device attach at the sb device, and then midi at the mpu.
Update the mpu at eso attachment.
1999-08-02 17:37:41 +00:00
9ab80b75b8
- Fix MX framebuffer size which should occupy 2MB in address range.
...
- Restore 72Hz interrupt service mistakenly ruined in the previous commit.
1999-08-02 06:00:40 +00:00
e78e58a7b8
- Fix TX 8bpp framebuffer size, which occupies 2MB.
...
- Rework CX RAMDAC register access like as other TC framebuffers.
1999-08-02 04:19:03 +00:00
f7141a0ffb
The Tadpole 3GX uses a modified Sun Mouse protocol. Instead of
...
sending 5 bytes per sample, it sends 3 omitting the 2nd set of
dx/dy updates. You can distinguish between the two forms since
the first byte of 5-bytes seq will be 0b10000xxx which a 3-byte
will have 0b10001xxx. This changes allows the Xsun server to
run unchanged on the Tadpole 3GX (ignoring for now that the
colormap is still broken).
1999-08-02 01:50:27 +00:00
825e233d2e
Allow the mouse baud rate to be patched (rather than forcing a recompilation
...
of the kernel). Also, if the mouse baud rate is 0, say the mouse the isn't
there (so a terminal may be attached in its place). Make debugging mouse
problems much easier.
1999-08-02 01:44:22 +00:00
cbf1f6f1b9
Move the MPU driver isa/ to ic/.
...
(I didn't move it in the repository because the revision history
is very short and uninteresting. :)
1999-08-01 18:05:39 +00:00
0c0dc211d4
Make an MPU attachment to ISA. Used for old Roland cards. Written
...
by me and gson@araneus.fi (Andreas Gustafsson).
1999-08-01 17:53:39 +00:00
6ca9b225e7
Add a timeout-routine that checks if transmit logic dies, and reset it
...
in that case. This is not uncommon when the interface is heavy loaded.
1999-08-01 15:25:41 +00:00
ba922d31d8
Re-work the Tx side to avoid calling into the tty layer at
...
interrupt time. This was the cause of the 'mmu fault' panics
seen by several people, as the Tx interrupt is at a higher
priority that spltty().
1999-08-01 09:35:05 +00:00
9baa857f5b
Regen.
1999-08-01 08:32:48 +00:00
9657de4af2
Add an entry for the TI PCI1211 PCI-CardBus Bridge.
...
From the cardbus patches.
1999-08-01 08:32:08 +00:00
b6b44d6809
Eliminate the need for needs-count for wsmux. This should make
...
wsdisplays work properly again.
1999-07-30 20:52:27 +00:00
fff1639c50
GRR! Kludge around the extremely annoying wsmux configuration lossage
...
by removing the "| wsdisplay" from the wsmux.c file declaration. This
will cause any kernel which includes wsdisplay but not wsmux explicitly
to fail to link, but at least those of us with multiple wsdisplays on
a single machine can build kernels again.
1999-07-30 20:42:16 +00:00
ad