but add a second argument to it to indicate whether the TLB/caches need to be
flushed. Default cortex to pmap_needs_fixup = 1. But check the MMFR3 field
to see if the fixed can be skipped.
Use a cf_flag bit 0 to indicate whether the A9 L2 cache should disable (bit 0 = 1)
or enabeld (bit = 0).
With these changes, the A9 MMU can use traverse caches to do MMU tablewalks
Also, make sure all memory has the shareable bit for the A9.
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL
Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.
Now wsconscfg(8) should be able to switch VTs when expected.
Implemented after no objection from tech-kern to the following:
On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?
<arm32/machdep.h>
Move the extern for cpu_reset_address to the same file.
Add cpu_reset_address_paddr.
Kill cpu_reset_v4_MMU_disable.
if cpu_reset_address is NULL, then the MMU will be disabled.
unwanted sideeffects in the RB_ASKNAME case. This fixes PR/46732.
No longer wrap MD cpu_rootconf(), as hp300 port stores reboot information
as a side effect. Instead call MI rootconf() from MD code which makes
rootconf() now a wrapper to setroot().
Adjust several MD routines to set the global booted_device,booted_partition
variables instead of passing partial information to setroot().
Make cpu_rootconf(9) describe the calling order.
as described in
http://mail-index.netbsd.org/tech-kern/2012/06/23/msg013442.html
PMP support in integrated to the atabus layer.
struct ata_channel's ch_drive[] is not dynamically allocated, and ch_ndrive
(renamed to ch_ndrives) closely reflects the size of the ch_drive[] array.
Add helper functions atabus_alloc_drives() and atabus_free_drives()
to manage ch_drive[]/ch_ndrives.
Add wdc_maxdrives to struct wdc_softc so that bus front-end can specify
how much drive they really support (master/slave or single).
ata_reset_drive() callback gains a uint32_t *sigp argument which,
when not NULL, will contain the signature of the device being reset.
While there, some cosmetic changes:
- added a drive_type enum to ata_drive_datas, and stop encoding the
probed drive type in drive_flags (we were out of drive flags anyway).
- rename DRIVE_ATAPIST to DRIVE_ATAPIDSCW to better reflect what this
really is
- remove ata_channel->ata_drives, it's redundant with the pointer in
ata_drive_datas
- factor out the interpretation of SATA signatures in sata_interpet_sig()
propagate these changes to the ATA HBA drivers, and add support for PMP
to ahcisata(4) and siisata(4).
Thanks to:
- Protocase (http://www.protocase.com/) which provided a system
with lots of controllers, SATA PMP and drive slots
- Conservation Genomics Laboratory, Department of Biology, New Mexico State
University for hosting the above system
- Brook Milligan, who set up remote access and has been very responsive
when SATA cable move was needed
1) Move core entropy-pool code and source/sink/sample management code
to sys/kern from sys/dev.
2) Remove use of NRND as test for presence of entropy-pool code throughout
source tree.
3) Remove use of RND_ENABLED in device drivers as microoptimization to
avoid expensive operations on disabled entropy sources; make the
rnd_add calls do this directly so all callers benefit.
4) Fix bug in recent rnd_add_data()/rnd_add_uint32() changes that might
have lead to slight entropy overestimation for some sources.
5) Add new source types for environmental sensors, power sensors, VM
system events, and skew between clocks, with a sample implementation
for each.
ok releng to go in before the branch due to the difficulty of later
pullup (widespread #ifdef removal and moved files). Tested with release
builds on amd64 and evbarm and live testing on amd64.
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.
This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.
http://mail-index.netbsd.org/tech-userlevel/2011/08/25/msg005404.html
This is used by disk tools such as disklabel(8) to dynamically decide is
the undelyling platform uses a disklabel-in-mbr-partition or not
(instead of using a compile-time list of ports).
getlabelusesmbr() reads the sysctl kern.labelusesmbr, takes its value from the
machdep #define LABELUSESMBR.
For evbmips, make LABELUSESMBR 1 if the platform uses pmon
as bootloader, and 0 (the previous value) otherwise.
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.
to store disk quota usage and limits, integrated with ffs
metadata. Usage is checked by fsck_ffs (no more quotacheck)
and is covered by the WAPBL journal. Enabled with kernel
option QUOTA2 (added where QUOTA was enabled in kernel config files),
turned on with tunefs(8) on a per-filesystem
basis. mount_mfs(8) can also turn quotas on.
See http://mail-index.netbsd.org/tech-kern/2011/02/19/msg010025.html
for details.
disabled by -D) from the output of newvers_stand.sh. Change -D to the
inverted logic, so that it adds the date to bootprog_rev in ().
Change all platforms accordingly. -D is added if MKREPRO is not yes and
wasn't present before. Platforms that didn't use -D don't depend on
MKREPRO now either.
Remove the inclusion of this file.
Acorn32 now always builds load_memory_disc_from_floppy(). This should
not be a problem as all configs have md(4).
Observed by: Masao Uebayashi <uebayasi@netbsd.org>
Set proper IPL_SOFTfoo values even in !FAST_SOFTINTS case.
Some assertions in MI code expect they have unique values,
per comments from rmind@.
Also cleanup various "interrupt hierarchy" code since IPL_NONE and
IPL_SOFTfoo should not be set by any hardware interrupt establish functions.
Ok'ed by mrg@, tested on shark and hpcarm.
