debe6e88b6
Calculate an offset of mailbox_in correctly by renaming BHA_MBO_OFFSET
...
to BHA_MBX_OFFSET and using it also for mailbox_in. Since all mailboxes
should be placed in a single continuous memory due to a hardware limitation,
an offset of any mailbox can be/should be calculated using a same expression.
2000-04-19 02:39:12 +00:00
edfd8044ec
Maintenace: add definitions for command status register.
2000-04-19 01:19:04 +00:00
0d117aa518
regen for changed pcidevs
2000-04-18 16:38:12 +00:00
88e62f7c84
SiByte, Inc. is vendor 0x166d.
2000-04-18 16:37:00 +00:00
5845348e54
Revert last change (the last change was not necessarily desirable, and
...
had some other minor side-affects that were troublesome).
2000-04-17 19:35:12 +00:00
a267efd061
#if 0 the (way bogus) PCI_CLASS_COMMUNICATIONS/PCI_SUBCLASS_BRIDGE_PCI (!!!)
...
match pointed out (again?) by Johan Danielsson, after i repeatedly told
him not to do something similar in com_cardbus.
2000-04-17 16:45:04 +00:00
5c507c46b5
regen
2000-04-17 12:01:20 +00:00
4f797c7b55
Panasonic KXLC003
2000-04-17 12:00:35 +00:00
7dbedb5a11
rewrite match function to use CIS information
2000-04-17 09:21:59 +00:00
1f1d169e20
extract serial funce
2000-04-17 09:16:38 +00:00
6e5b98b12c
add serial funce entry
2000-04-17 09:15:58 +00:00
d8bccc7c6e
Regen.
2000-04-17 00:26:45 +00:00
fcd420cf5d
Add product ID for the S3 Trio3D/2X AGP graphics adapter.
2000-04-17 00:26:22 +00:00
0ba1516cd7
Use a default attribute to restore the display mode to original settings.
...
Also, pass in WSATTR_COLORS at all times when allocating screen attributes
since without it we cannot even get black-on-white from rasops(9).
2000-04-16 21:49:49 +00:00
876b21e514
Add more items and reorganize.
2000-04-16 18:38:44 +00:00
0aae0cd7a6
only print packets if debug > 1
2000-04-16 17:03:42 +00:00
9403f3fec8
Reset the device before starting the init sequence.
...
Add shutdown hook.
2000-04-16 09:55:39 +00:00
c71398f7a9
Don't allow configuration where the specified SectPerSU may result in IO larger
...
than MAXPHYS being sent to underlying devices. Addresses PR#9868.
Will change if/when MAXPHYS goes bye-bye.
2000-04-16 03:24:26 +00:00
6d6ad52fd4
Regen.
2000-04-15 15:57:59 +00:00
f6b73a654c
Add another camera.
2000-04-15 15:57:27 +00:00
8c1897c2fd
Also add the Intel ID for the LAN+MODEM56 card to the csdevs list to get
...
it working.
2000-04-15 06:29:25 +00:00
501c07e5d4
Add an "iopener" keymap variant, giving us.iopener and
...
us.iopener.swapctrlcaps. This makes F1 ("Back") into Escape, and shifts
the other keys over by one, so F2-F12 ("Forward"-"Home") become F1-F11.
2000-04-14 23:11:08 +00:00
321bc31690
Remove spurious splx() call.
2000-04-14 20:33:48 +00:00
c56f4bceb8
Fix some callout fallout. Hi Jason!
2000-04-14 19:31:50 +00:00
b6ef06e018
Add a file I forgot.
2000-04-14 18:15:47 +00:00
2ed37fcf5d
Add driver for FTDI FT8U100AX serial adapter.
...
XXX This is still experimental and needs more work.
2000-04-14 14:51:22 +00:00
219f3c9ccf
More debug.
2000-04-14 14:41:35 +00:00
1767c08cba
Add a capability for pre/post processing on write/read.
2000-04-14 14:21:55 +00:00
3149043619
Add a driver for the Rio 500 MP3 player.
...
XXX This driver might go away again, since you can do it all with ugen.
XXX But this driver is compatible with the Linux driver so there are
XXX programs for it.
2000-04-14 14:20:02 +00:00
0839e2a0d9
Regen.
2000-04-14 14:15:41 +00:00
471d06cfbc
Rename FUTURE to FTDI.
...
Add the funky little D-Link radio.
2000-04-14 14:14:48 +00:00
017ca78459
Make attach of ugen work as it should so product&vendor locators can be used.
2000-04-14 14:13:56 +00:00
e44f0f1147
Support for SIGIO.
2000-04-14 14:12:47 +00:00
eaaf682603
Fix a typo in a comment.
2000-04-14 14:12:11 +00:00
e1f94170e5
Generate a diagnistic dump on "Host Controller Halted".
2000-04-14 14:11:36 +00:00
dfe176302c
add some casts to (u_long) to shut up gcc
2000-04-14 08:22:49 +00:00
e3f576a688
disable function after attach
2000-04-13 16:17:55 +00:00
90bee16298
enable com at cardbus
2000-04-13 11:18:24 +00:00
8fba568264
cardbus attachment for com devices (thanks to Chris Demetriou and
...
Darren Reed for constructive criticism and help with testing)
2000-04-13 11:17:53 +00:00
3692f27c7d
regen
2000-04-13 10:13:12 +00:00
69241946d8
add entry for a Xircom modem (as reported by Darren Reed)
2000-04-13 10:12:46 +00:00
81bac16312
add CARDBUS_SUBCLASS_COMMUNICATIONS_SERIAL
2000-04-13 10:11:15 +00:00
d5d6c20e74
Regen
2000-04-12 21:13:12 +00:00
e083abcad8
Add support for the SOHOware PCMCIA Ethernet card, model ND5100-E.
...
This seems to be a re-badged NDC (National Datacomms. Corp) card.
It needs a quirk entry due to lack of manufacturer tuple in the CIS.
For some reason, the 'Tx/Rx' LED on the connector module is inverted
such that it is off during network activity...
2000-04-12 21:07:55 +00:00
eba24e4799
* Spell shift counts in decimal and masks in hex
...
* Optimize numerous array references
* Cleanup whitespace turds
2000-04-12 14:22:28 +00:00
ecb5f2e56a
revisit in6_ifattach().
...
- be persistent on initializing interfaces, even if there's manually-
assigned linklocal, multicast/whatever initialization is necessary.
- do not cache mac addr in the kernel. grab mac addr from existing cards
(this is important when you swap ethernet cards back and forth)
now ppp6 works just fine!
call in6_ifattach() on ATM PVC interface to assign link-local, using
hardware MAC address as seed.
(the change is in sync with kame tree).
2000-04-12 10:36:38 +00:00
21837796b8
Maintenace: add NetBSD tag and correct the name of the auther.
2000-04-11 06:57:59 +00:00
1e921e0bd3
Regen.
2000-04-10 07:46:51 +00:00
e49807d100
Incorporate the changes of RL81x9 driver provided by M. Kanaoka
...
<kanaoka@ann.hi-ho.ne.jp>. He separated the driver into IC specific
portion and bus attachment portion and added cardbus attachent.
2000-04-10 07:42:55 +00:00
73fe3e3323
Add dependancy to wdc for ata.c, so that 'atapibus at umass' will compile
...
without wdc or pciide. Closes kern/9842 from Gary Duzan.
2000-04-10 06:43:38 +00:00
8ad280f815
sparc -> __sparc__
...
sun3 -> __sun3__
2000-04-10 02:16:15 +00:00
40b25953db
Add driver for Prolific PL2301/PL2302 host-to-host adapter.
2000-04-09 18:23:23 +00:00
d9c7f72cf3
Device driver for the DEC DEBNA/DEBNT/DEBNK ethernet device.
...
This is for sure the most overkill hardware I've ever seen! For example,
it needs the VAX page tables so that it can access all data structures
and mbufs in virtual memory! It will be a real challenge to make this
device work on mips and Alpha systems :-)
2000-04-09 16:49:57 +00:00
8fb6cb9b81
Remove usused field.
2000-04-08 20:54:38 +00:00
2d88a5d886
Regen.
2000-04-08 20:35:13 +00:00
e75e18b138
Add another ISD IDE adapter.
2000-04-08 20:14:00 +00:00
909b096cf8
Remove #ifdef __NetBSD__ code inside !__NetBSD__ part.
2000-04-08 13:49:43 +00:00
de19673726
Add vaddr_t cast to vtophys() arg. (for powerpc)
2000-04-08 13:44:12 +00:00
9964217571
Fix fms_free like auvia_free
2000-04-08 03:50:48 +00:00
a1ea15c0e1
Fix auvia_free, clean up more on close, and be more careful in interrupt
...
handler.
2000-04-08 03:33:58 +00:00
d65678850d
fix build of ucom. (static/non-static)
2000-04-08 01:22:26 +00:00
ef57f37442
Regen.
2000-04-07 19:00:17 +00:00
4ca1044eb8
Add Prolific host-host adapter.
...
I'll write a driver in a few days.
2000-04-07 18:59:58 +00:00
0ed7436590
Add a patchable variable `tlp_srom_debug' that enables dumping of
...
SROM output, etc.
2000-04-07 18:58:15 +00:00
4044b5a41c
Use separate callouts for motor-on and motor-off. Fixes a condition
...
where the floppy driver would wedge because a motor-on timeout would
be cancelled by another I/O operation cancelling a motor-off timeout.
From enami tsugutomo <enami@sm.sony.co.jp>.
2000-04-07 16:58:53 +00:00
91d6998394
Combine the Alpha, BeBox, and i386 ISA floppy drivers with a sledgehammer.
...
Not a perfect solution, but this is two less versions of this driver I
now have to modify.
2000-04-07 16:32:03 +00:00
3b05a69aa2
Remove a couple of Static that shouldn't be there.
2000-04-07 12:40:16 +00:00
9355847b78
Fix typos in comments.
2000-04-06 23:44:20 +00:00
af0c0d535a
Fix a bug in HID Pop handling. From UCHIYAMA Yasushi.
2000-04-06 22:58:32 +00:00
cae6a3d2a4
Fix bogus byte-swap code in ncr_snooptest().
...
XXX This snoop test is not needed if ncr had real bus_dma(9) support...
2000-04-06 14:42:06 +00:00
7859835446
Add another #if NATAPIBUS > 0 in case there is no atapibus attached.
2000-04-06 13:52:04 +00:00
cf248f12dd
Add some, remove some.
2000-04-06 13:33:47 +00:00
a302716de4
Let the parent device of a ucom decide what size the read and write
...
buffers should be since it knows about the speed.
Increase the buffer size of uvisor.
XXX The uvisor is still pitifully slow. There must be a problem somewhere.
2000-04-06 13:32:28 +00:00
7bc5a1ca36
Add CardBus interrupt enable flag. When this flag is asserted, a
...
CardBus interrupt is routed to the child devices and vice versa. This
flag is negated when a pccbb receives a suspend or stanby event.
2000-04-06 09:11:57 +00:00
1acb380bf7
Make it compile without USB_DEBUG. From Chris Jones.
2000-04-05 21:24:11 +00:00
bac9153774
Advance index into rasops_cmap for each color, not per triplet.
...
This makes highlighing and color possible on truecolor displays.
2000-04-05 20:33:28 +00:00
1b535c32fc
Make this driver actually work.
...
(Noone did any testing for me, so I had to buy a Handspring Visor myself.)
2000-04-05 11:12:48 +00:00
8b5373dd2e
Use reference counting on the softc so detach doesn't blow it away prematurely.
2000-04-05 11:11:33 +00:00
952f1cf1d0
avoid using uninitalised variables inside WDCDEBUG.
2000-04-05 06:27:36 +00:00
36b65b7d48
return if we can't map DMA buffers
2000-04-05 05:54:02 +00:00
07702f68a6
Introduce new filesystem type FS_CCD so that an operator can mark the
...
ccd component partition. Note that the ccd driver still allows partitions
of any types as components since an on-disk BSD disklabel isn't available
on some port.
2000-04-05 04:03:20 +00:00
710872c1d0
add "hme at pci" support.
2000-04-05 02:31:19 +00:00
2d78be17d1
Fix computation of ri_xorigin in RI_CENTER case; convery from bytes to
...
pixels, not from bytes to bytes^2/pixel.
2000-04-04 20:59:17 +00:00
36b5d25ca8
Make protocol message more accurate.
2000-04-04 20:16:47 +00:00
a94b555441
Put a ratecheck on error messages from the interrupt pipe.
2000-04-04 20:16:19 +00:00
5ecdfa3fc0
Rearrange the 21142/21143 SROM/CIS handling code to give it a chance
...
of working, and last-ditch default to MII-over-SIO with no reset routine
if we don't find an ISV SROM or quirk.
2000-04-04 19:33:21 +00:00
5a41b5bf56
- if_tlp_cardbus.c: Use the `pmreg' pointer passed by by
...
cardbus_get_capability() [mirror change already made to if_tlp_pci.c]
- if_tlp_cardbus.c: If we don't find an ISV SROM, try to grab the
Ethernet address from the CIS.
- if_tlp_cardbus.c: set CardBus cards to store-and-forward mode from
the get-go.
- Put the TxThresh tables in tulipvar.h, and use them in the CardBus
and PCI front-ends to go to store-and-forward mode.
- Document the Xircom X3201-3 clone a little more.
2000-04-04 19:22:50 +00:00
77f1e5eb02
Add checks to detect busy-waits, conditionnal on new debug flag
...
DEBUG_DELAY (0x40). This will print how much time we did loop in wdcwait(),
if we had to read registers more than one time.
2000-04-04 12:43:13 +00:00
fcb3e9ddac
Better fix to previous: delay(100) before the IDENTIFY, and if it fails
...
delay(1000000) and retry. The 1s delay is needed for some special case only,
no need to hang the machine for that long everytime (especially for PCMCIA).
2000-04-04 09:25:51 +00:00
d3b06b0596
regen
2000-04-03 15:05:05 +00:00
0caed62b03
add some NVIDIA chipsets
2000-04-03 15:04:42 +00:00
358b947b7b
Correct a typo.
2000-04-03 13:40:05 +00:00
d063047593
Enable QIC157 command set. Untested.
2000-04-03 12:31:34 +00:00
dc3ce0b35e
Enable UFI protocol. Still untested in NetBSD. Used by, e.g., Y-E Data
...
floppies.
2000-04-03 12:12:38 +00:00
b9d50c36a7
Regen.
2000-04-03 12:10:04 +00:00
e0b4887adf
Add more vendors and devices. From FreeBSD and Nick Hibma.
2000-04-03 12:09:43 +00:00
6442efb498
Make this file compiles under some condition:
...
- #if 0'ed out the umass_reset for now.
- some atapibus specific code is conditionalized by NATAPIBUS.
2000-04-03 03:56:49 +00:00
c560e9a77b
When killing pending xfers on device detach, we can't expect scsipi_done
...
to remove all xfers from the pending queue. It removes only xfers for
asynchronous transactions. So, simply loop over all pending xfers
with calling scsipi_done and wait xfers to drain. Addresses PR#9703.
2000-04-03 03:37:33 +00:00
1f0de7e7d2
actually put a _comment_ before the second read of the ident register
...
that Charles added in rev 1.58. Not only is it good programming practice
to explain magic, but code that looks like:
reg = pcic_read(h, PCIC_IDENT);
reg = pcic_read(h, PCIC_IDENT);
is _gonna_ be interpreted as a cut-n-paste error by someone eventually.
2000-04-03 01:55:25 +00:00
ae8fb348b3
Fold long line.
2000-04-03 01:40:51 +00:00
e126f0d1b3
New and shiny version of the umass driver. This is a port of the new
...
FreeBSD umass driver by Nick Hibma <n_hibma@freebsd.org> and
MAEKAWA Masahide <bishop@rr.iij4u.or.jp>.
Improvements:
uses asynchronous USB requests
supports more transport protocols (Bulk-only and CBI)
supports more command sets (SCSI and ATAPI)
Tested with Zip100 and Imation Superdisk.
2000-04-02 23:46:53 +00:00
60057aca5c
Allow atapibus to be attached to umass.
2000-04-02 23:40:41 +00:00
b6cee95eb7
Let the device thet gets an atapibus attached specify how to kill pending
...
transfers by giving a function pointer.
The old method always called wdc specific code.
2000-04-02 23:38:19 +00:00
b1c28384dc
If the SROM size is to far out of range, issue a diagnostic and set the size
...
to 1Kb. Some boards (e.g. my SMC9332) have a broken MicroWire interface.
2000-04-02 23:38:05 +00:00
0a425e1f3d
Generate an error message if starting a transfer fails.
2000-04-02 21:25:41 +00:00
8aeb8df354
Add a flag to tell whether a MAC address was actually found in the CIS.
...
XXX This whole piece of code should go away ASAP. We should use a callback
as in the PCMCIA code. In fact, we should use the PCMCIA code...
2000-04-02 19:11:37 +00:00
dc680eb373
Slight correction to last: really only do it if it's a 21142 or 21143.
2000-04-02 19:02:34 +00:00
f5b5bbbf21
Add code to read and write bt463-style ramdacs; pick ramdac interface
...
functions based on type returned from tga_getconf().
Adapt to change in ramdac interface.
Fix race condition in tga_sched_update().
Make tga_sched_update() work before interrupts are enabled.
2000-04-02 19:01:11 +00:00
bc3260fcb0
Restore ramdac-type field to TGA configuration structure.
2000-04-02 18:59:32 +00:00
c0a4c9e67d
Move bt463 code to dev/ic and adapt to the new ramdac interface.
...
Set default window type to 24-bit truecolor.
Correctly set pseudocolor mode.
2000-04-02 18:57:36 +00:00
c66f54d73d
Adapt to change in ramdac interface.
2000-04-02 18:55:01 +00:00
2b4ac6a7b9
Add ramdac_register() to interface structure.
2000-04-02 18:54:33 +00:00
e70fd4b33c
During the socket probe, read the ident register twice.
...
I don't understand why, but sometimes the clone chips in hpcmips boxes read
all-0s the first time.
2000-04-02 18:29:14 +00:00
7246364f07
With SCSIVERBOSE, only print sense data if there actually is a problem.
2000-04-02 17:58:17 +00:00
7797648425
Change the initial field in struct ata_atapi_attach and struct scsipi_link
...
slightly to allow scsibus and atapibus to attach to the same device.
Furthermore, only attach a scsibus when the bus type is BUS_SCSI.
2000-04-02 17:25:52 +00:00
229fcf5bbe
When using MII on 2114[23] chips, zero the SIA TXRX register to disable the
...
internal Nway engine. This fixed a major performance problem.
Thanks to Matt Thomas for pointing this out.
2000-04-02 17:23:33 +00:00
fa07b81e43
Make to match also MII_OUI_DAVICOM.
...
(This seems to work, but any GENERIC does not have dmphy...)
2000-04-02 03:06:19 +00:00
28d49dce4e
Add missing protect from disk interrupt while calling scsipi_free_xs.
2000-04-02 03:05:55 +00:00
f564201ae9
sync with ata driver change (dma_start args).
2000-04-02 02:07:52 +00:00
3b69a8011b
make it compile again after ATAPI changes.
2000-04-01 17:52:14 +00:00
b2cd1f029a
Bump delay() from 100 to 1000000 before attempting a IDENTIFY just after a
...
reset - solves a problem reported by cpg@aladdin.de .
2000-04-01 14:50:32 +00:00
26f6c9a9cf
- DMA code cleanup: pciide_dma_finish() doesn't stop/unload the current DMA op
...
if an IRQ was not detected, unless the force flag was given. Use this to
detect if the IRQ was for us (closer to shared IRQ for controllers which
don't have their own IRQ handler in pciide.c) and to poll for DMA xfer.
Also makes the timeout recovery code simpler.
- ATAPI cleanup: don't call controller-specific functions from atapiconf.c
(wdc_*), so that it's possible to attach an atapibus to something else
than a wdc/pciide (Hi Lennart :).
Overload struct scsi_adapter with struct atapi_adapter, defined
as struct scsi_adapter + atapi-specific callbacks. scsipi_link still points
to an scsi_adapter, atapi code casts it to atapi_adapter if needed.
Move atapi_softc to atapiconf.h so that it can be used by the underlying
controller code (e.g. atapi_wdc.c).
Add an atapi-specific callback *atapi_probedev(), which probe a drive
in a controller-specific way, allocate the sc_link and fills in the
ataparams if needed. It then calls atapi_probedev() (from atapiconf.c)
to do the generic initialisations and attach the device.
- While I'm there merge and centralise the state definitions in atavar.h.
It should now be possible to use a common ata/atapi routine to set the
drive's modes (will do later).
2000-04-01 14:32:22 +00:00
7311856f29
Add a delay before reading the number of ports from the controller to
...
avoid getting 0 from it.
2000-04-01 09:27:35 +00:00
ca4c16d936
Note that the Handspring Visor is a Palmpilot compatible PDA.
2000-03-31 13:08:01 +00:00
07dea214dc
Add auvia, a driver for the integrated AC'97 audio on the VIA VT82C686A
...
southbridge.
Tested on a ASUS K7M (w/ AD1881 codec). Please report any problems.
2000-03-31 04:45:28 +00:00
cf0b47bd0e
Minor cleanup of unneeded verbosity.
2000-03-31 02:05:24 +00:00
cd61979606
Print out the 'root' status of a RAID set during autoconfiguration.
2000-03-31 01:20:43 +00:00
4772fa5b3c
regen
2000-03-30 17:35:39 +00:00
4c8aed5893
add the device id for the VIA 686A modem controller, continuing the
...
trend of mislabelling VIA's south bridges
2000-03-30 17:34:53 +00:00
d3908431bb
Turn on UVISOR_DEBUG with USB_DEBUG.
2000-03-30 17:04:47 +00:00
e8f6613abe
Add driver for the Handspring Visor.
...
This code probably doesn't work, because it has not been tested.
Despite several pleas for testing there doesn't seem to be any Visor owners
out there. Perhaps it will get tested if it's in -current?
Anyway, the code can at least serve as a template for how to make a USB driver
that shows up as a tty.
2000-03-30 16:56:19 +00:00
2c3137dc38
Add forgotten OpenBSD fix.
2000-03-30 16:38:55 +00:00
8d702c4b54
Nuke 'register' from some function prototypes.
2000-03-30 13:39:07 +00:00
169ac5b3c1
Remove register declarations.
2000-03-30 12:41:09 +00:00
4fe9287221
Two more OpenBSD fixes.
2000-03-30 08:53:30 +00:00
5a5c310fae
Delete redundant decls of fxp_enable(), fxp_disable() - they're in
...
i82557var.h.
2000-03-30 02:06:17 +00:00
9e370d4402
Delete redundant decl of com_attach_subr(), it's in comvar.h.
2000-03-30 02:04:30 +00:00
b75e08a514
Delete redundant decl of aicattach(), it's in aic6360var.h.
2000-03-30 02:02:53 +00:00
dd7160dcba
Afew more OpenBSD portability fixes.
2000-03-30 00:18:17 +00:00
fc4d9ff403
Get rid of register declarations.
2000-03-30 00:00:55 +00:00
c62698f733
Fix a couple of misspelled comments.
2000-03-29 23:16:48 +00:00
1b57fb1495
Remove some unused prototypes.
2000-03-29 18:55:36 +00:00
96806cb7ea
Fix a buglet.
2000-03-29 18:30:46 +00:00
a25e27e1eb
Some OpenBSD portability fixes.
2000-03-29 18:24:52 +00:00
356d681927
Add ukactivate&ukdetach so uk devices can be detached.
2000-03-29 18:11:44 +00:00
c693409acb
Nuke register declarations.
2000-03-29 13:57:51 +00:00
ac8fa9c43d
Remove "register" declaration.
2000-03-29 13:09:02 +00:00
627a9ec886
Spelling error.
2000-03-29 12:02:01 +00:00
365daa37be
Remove redundant decl of cold - it's in <sys/kernel.h>.
2000-03-29 03:59:43 +00:00
8a447f3757
Remove reduncdant decl of wdc_kill_pending - it's in <dev/ic/wdcvar.h>.
2000-03-29 03:56:53 +00:00
enami